How to Replace Rear Brakes 2011-2019 Ford Explorer

Рет қаралды 57,883

Жыл бұрын

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABFS11183
This video shows you how to install new, quality TRQ brake pads and rotors on your 2011-2019 Ford Explorer. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer
Tools you will need:
• 11mm Wrench 1aau.to/oU5/1AXAA00010
• 10mm Socket 1aau.to/oa8F/1AXAA00017
• 13mm Socket 1aau.to/obsr/1AXAA00015
• 15mm Socket 1aau.to/obsr/1AXAA00015
• 19mm Socket 1aau.to/oafN/1AXAA00043
• Brake Caliper Hanger 1aau.to/oix/1AXAA00439
• T40 Bit 1aau.to/oDE/1AXAA00008
• 1/2 Inch Ratchet 1aau.to/oafN/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/oa8F/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obsr/1AXAA00015
• Socket Extensions 1aau.to/obsr/1AXAA00015
• Torque Wrench 1aau.to/oaCY/1AXAA00044
• Brake Fluid
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves 1aau.to/o3v/1AXSS00048
• Safety Glasses 1aau.to/oUE/1AXAA00343
• Silicone Paste
• Floor Jack 1aau.to/o38/1AXAA00068
• Jack Stands 1aau.to/oSA/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 20

@TRQ Жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@gandydancer6853 8 ай бұрын

Just a note to let everyone know that maybe a little clearer. When you were compressing caliper, the tool fits into slots and does not just push piston, but it turns the piston in a clockwise direction, allowing it to retract. This type can not be pushed like with a c-clamp. Thanks

@JoseGonzalez-cg6gs 10 ай бұрын

Thank you. We are a family of four and we are always looking for a way to manage our expenses. I'm a novice, however, over the weekend, using your video I was able to view every step to do a complete brake job. Thank you so much!

@user-ew8ck3ol4i Жыл бұрын

I am from Iraq and I have benefited from this site a lot, thanks my friends.

@natezenker3104 11 ай бұрын

Excellent how-to video. This was extremely helpful in completing this exact work on my wife's vehicle today. Thanks!

@ralphtoles8642 8 ай бұрын

Excellent! One of the few videos sources that I would need to watch other videos to understand the full process! Well done!

@user-gj7mo3vi4h 3 ай бұрын

this is an excellent video. I have 1 criticism. If you could explain why you have to position the piston a certain way it would help. It mates with the pin in the back of the pad and will knock the pad askew if it isn't in the slotted area. Otherwise, thanks for great instruction.

@Edwards-rn9du 3 ай бұрын

on my 2016 Explorer XLT rear brakes, I could not get the caliper piston to rotate inward with the tool with the bleeder open or the cover off the master cylinder. The emergency brake is off as well. I have not started on the other side but want to fix the drivers side if possible. Any help would be appreciated.

@pqgscott 7 ай бұрын

Nice best brake job video I have ever seen!

@patriotvideos9140 8 ай бұрын

Fantastic job. Great instructional!

@D.Jay. 8 ай бұрын

Very well made and informative. Thanks

@danielmandernack6743 6 ай бұрын

Silicone lube on the brake pads! Should have cleaned or changed your gloves first.

@ManWithAPlan83 10 ай бұрын

I have two questions. So you don't take the cap off the master cylinder container before you start working? And do you not have to press the brake so the pads sit correctly before putting the tire back on?