2017 Ford Fusion Front brakes and Rotor replacement

Рет қаралды 10,512

9 ай бұрын

Basic brake and rotor replacement on 2017 Ford Fusion Ecoboost.
Tools used:
Quinn 3/8 digital torque wrench
Quinn 3/8 rachet
7mm 3/8 allen socket
18mm 3/8 deep well socket
3/8 x 2" extension
CRC brake quiet lube
medium size flat head screwdriver
MADDOX Disc Brake Pad and Caliper Service Tool Kit

Пікірлер: 25

@abdellahazim5114 3 ай бұрын

Camera men did great job.thx men

@writeheiney 2 ай бұрын

Excellent instruction and suitable for those individuals who already have basic mechanic's skills. Thank you

@JohnVassoler 2 ай бұрын

Thank you made the job alot easier!!!!

@EMaF_DIY 2 ай бұрын

Glad it helped!

@alexjoarzate6408 8 ай бұрын

Great video!

@EMaF_DIY 8 ай бұрын

Thanks!

@stretch7s 7 ай бұрын

Great video! It helped a lot, thanks!

@EMaF_DIY 7 ай бұрын

Glad it helped!

@1DrunkSocialite 8 ай бұрын

Great work! Best explanation I've seen yet!

@EMaF_DIY 8 ай бұрын

Wow, thanks!

@monizzlemychizzletheboss7213 7 ай бұрын

Great video

@EMaF_DIY 7 ай бұрын

Thanks!

@triggerftu 5 ай бұрын

thinking of changing my own breaks. this helps alot. out where i am there is no service that can service my American Ford Fusion. the American standard for repair is crazy different that it is here in Europe. (in the EU theres a special document for all eu spec cards that has all the part codes for everything, without one a mechanic will not touch the vehicle. not even an official dealer.)

@alboreland5949 2 ай бұрын

Yea in the US there is very little regulation for automotive repair especially if you repair your own vehicle.

@FredrikBru Ай бұрын

Customer complained about vibrations and noice from a fairly new brake job. You only changed the pads and rotors. You did not clean the hub nor cleaned the caliper sliding pins? Customer will have the same problem in like 2-3 months….

@jeffreyavalos782 6 ай бұрын

Great explanation. I'm thinking of changing my brakes myself. It seems pretty straight forward. Ive done very light self maintenance on cars before, would you say this is something a novice can do without much fuss? Also, are there places that loan a tool? I dont have a piston presser or a torque bar.

@EMaF_DIY 6 ай бұрын

I think a novice can do the work, but maybe have someone with skills double check or help. It's just a safety risk if not done correctly. Ad for loaner tools, most part stores do a loaner tool program. You actually pay for the tool when you get it, then they give full refund when you return it back. However the tool can be purchased at Harbor Freight for $39. Here is link to the one I use in video. www.harborfreight.com/disc-brake-pad-and-caliper-service-tool-kit-11-piece-63264.html

@jeffreyavalos782 6 ай бұрын

@@EMaF_DIY Just did it today and was successful! Thank you for the step by step, it was VERY helpful

@EMaF_DIY 6 ай бұрын

That's awesome to hear and the main reason I started making these videos. @@jeffreyavalos782

@corystheboss 7 ай бұрын

Do you have to decompress?

@EMaF_DIY 7 ай бұрын

Yes, that's what the Maddox brake tool kit is for or you can use c-clamps like old school. I prefer the brake tool as it is easier and insures the caliper goes straight.

@chevy2826 7 ай бұрын

Does front replacement need maintenance mode on?

@philippetri4154 7 ай бұрын

@andykolbin1783 3 ай бұрын

No just rears

@Sedoyi 6 ай бұрын

first of all, when you put in a new rotor, you need to lubricate the hub assembly to prevent burning rotor to it. so this video is a little mess for me