How to Replace Shock & Spring Assembly 2015-2020 Cadillac Escalade

Рет қаралды 45,459

Жыл бұрын

Buy Now!
New Shock & Spring Assembly from 1AAuto.com 1aau.to/ia/1ASHA00499
This video shows you how to install a shock & spring assembly on your 2015-2020 Cadillac Escalade. A shock and spring complete assembly simplifies installation. You don't need to separate the spring from the shock absorber.
This process should be similar on the following vehicles:
2015 Cadillac Escalade
2016 Cadillac Escalade
2017 Cadillac Escalade
2018 Cadillac Escalade
2019 Cadillac Escalade
2020 Cadillac Escalade
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaY3/1AXAA00013
• Pocket Screwdriver
• Pry Bar 1aau.to/oHA/1AXAA00020
• 15mm Wrench 1aau.to/oKm/1AXAA00010
• 10mm Socket 1aau.to/oaJr/1AXAA00017
• 15mm Socket 1aau.to/oaZy/1AXAA00015
• 18mm Socket 1aau.to/oZj/1AXAA00043
• 22mm Socket 1aau.to/okw/1AXAA00266
• 7mm Socket 1aau.to/oaJr/1AXAA00017
• Trim Tool Set 1aau.to/oTk/1AXXX00006
• T15 Torx Driver 1aau.to/oAz/1AXAA00008
• 3/8 Inch Drive Ratchet 1aau.to/oaZy/1AXAA00015
• Torque Wrench 1aau.to/oajy/1AXAA00044
• Gloves 1aau.to/owG/1AXSS00048
• Safety Glasses 1aau.to/orh/1AXAA00343
• Floor Jack 1aau.to/oNZ/1AXAA00068
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 17

@TRQ Жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@dailyrevs1320 3 ай бұрын

Here’s my feedback: My vehicle is a 2016 Cadillac Escalade with front shocks that were completely done to the point where the ride was so rough it felt like a Roman Charriot. It would bounce a lot too. 1. The front shocks from 1AAuto worked on my vehicle. -no check engine lights -easy -plug and play 2. The reason why she takes off the inside fender skirts is because her vehicle is on a lift. If you’re doing this in your garage, just pop the hood and you’ll have easy access to the top 3 bolts. 3. The shocks fixed all my issues and you can tell a huge difference. 4. The only issue I did have was needing an extra hand to help me position the shocks while I pull the control arms down. I’ll try to remember 6 months from now to give an update on how the shocks are holding up

@TRQ 3 ай бұрын

+@dailyrevs1320 Thanks for watching our video! 1aau.to/m/Shop-TRQ

@jamessnell105 6 ай бұрын

I know that she wasn’t working on the brakes but the rotor is installed on the wrong side of the vehicle. I replaced my struts yesterday without removing my inner fender wells but it looks like it would make it easier to access the top of the struts. This is a good instructional video.

@desireethomas1916 Ай бұрын

Great video! Love also that was a female that did the work. I am a female and can’t afford to go to shop so I have to figure it out on my own.

@eliaasmer6656 Жыл бұрын

Guys no need to take the fender liner off , also a 18 mm wretched wrench works better , this are aftermarket struts the ride won’t feel as the OEM ones so u get what u paid

@elgil3274 9 ай бұрын

Nice work very well explained. Thank you

@drj1967 7 ай бұрын

Buyer beware. I replaced my struts on my 2016 Yukon Denali with TRQ struts with magnetic ride. For some reason, the front struts seem to bounce a lot while driving. I noticed the spring coils on the TRQ are much thicker than stock. Honestly, I haven't been happy with them. I am not sure what to do. I think I am going to have to bite the bullet on the money paid for the install and send them back. If someone has any suggestions, I sure would appreciate it.

@bgmspacejam Жыл бұрын

I just installed these yesterday on my 2015 Yukon Denali. The ride quality still hasn’t improved. I don’t have a service suspension light on the dash but the the ride quality is the same as with the busted struts. What do you think is wrong?

@chuckcts-v3460 2 ай бұрын

Why didn't you remove that large sticky tag from the top of the strut?

@johnorozco7580 8 ай бұрын

I bought all 4 those shocks and i replaced tahoe 2016 how can reset the suspension control module the ride now is much better but i still have a bouncing