How to Replace Single LEDs for an LED TV - ShopJimmy LED Strip Rework Station Tutorial

Рет қаралды 786,293

8 жыл бұрын

How to Replace Single LEDs for an LED TV
CLICK HERE TO PURCHASE: www.shopjimmy.com/catalog/prod...
This video is designed to be a guide. Please note that other complications may exist that are not addressed in this guide. While we always strive to provide accurate and detailed information, we can't guarantee that it will fix your TVs issues. ShopJimmy is not responsible for any harm that you may cause to yourself or damage to your TV, during the repair process. Try all repairs and troubleshooting at your own risk.
Be sure to take all of the proper safety precautions.
In this video we will show how to replace an individual LED, in an LED strip from a TV.
We will be using our ShopJimmy LED strip rework station, along with our ShopJimmy Tweezers, blade, super glue, replacement LEDs, and replacement diffusing lenses.
I will use my tweezers to get underneath the diffusing lens and pop it free from the LED strip.
I will use my blade to remove the plastic glue around the LED. Removing this glue, ensures that the replacement lens will rest at the proper height, after replacing the LED.
Get the LED centered on the Rework Station and then turn the station on. Use the tweezers to gently push the LED to see if it has warmed up enough to move and be removed.
I can also look at the LED and see when the solder around it softens.
Once the LED is ready, I will use my tweezers to lift it from the strip.
Take the replacement LED and line it up properly on the strip.
Our image shows the bottom of the LED and how it should line up on the strip.
Get the LED into position and then use the tweezers to get it into its final position.
Once aligned, you can lift the LED strip from the station to allow it to cool and harden in place.
Use the super glue on the dots around the LED, on the strip.
Place the lens diffuser into position and allow the super glue to harden before moving it.
TV Repair Made Easy™
© 2016 ShopJimmy.com, LLC.

Пікірлер: 196

@davehouston7342 4 жыл бұрын

Just got mine, and WoW makes the job sooo easy and quick. Also got the LED tester, great combo.

@leecewest 7 жыл бұрын

I used a soldering iron and replaced 4 LEDs with singles from ShopJimmy. It singed the back of the strips, and smelled like old cat pee, but it worked! I fixed a 50" LG I picked up for $10 in parts. Thank you for this video and for selling the LEDs!

@TigerKittay 4 жыл бұрын

I would test the replaced LED first before gluing the lens diffuser.

@confirmhandle Жыл бұрын

Excellent point! 💯

@SpikesMavic 2 жыл бұрын

Great vid, thank you, the problem I have is the larger soldering joint on the strip is Possitive, but the larger area contact point on the LED is Negative !

@abdsakowa 7 жыл бұрын

Nice and easy , i want one of those station . So far i hv replace whole strip. i want to able to remove single led. i already hv new spare one

@CASHSEC 3 жыл бұрын

Doing this for the first time requires a skill level to be built up. Then you may find that the surface mount pad on led is different to to that on the strip. I opened the pad gap on the strip pads to minimise short. I used hot air gun but that will blow the Led off the strip. Used a made up tool that allowed a screw to bare down on the Led whilst being soldered. Test as you go. I used about 40 DC across 14 LEDs. Check for flickering LEDs. Replace as they may be on the way out. Replace any LEDs that are dim. I ordered cold white half watt 3.4 volts. The light has a slight yellow look so when I finished the repair may need to set tint levels to compensate. LEDs back in frame so next job is to re fix the diffuser lenzs then the white back sheet. Two days work so far but speed is increasing. The shop Jimmy hot plate seems cleaner but more for the professional. My wife was not too keen on me using her iron. Thanks shop Jimmy for all the advice.

@Sivim 7 жыл бұрын

nicely done.

@gustavoreal1931 7 жыл бұрын

very good video, but not reheated carvonizar demaciado to the plate where the soldier is led ?, and glue to be used must withstand heat, which they use?

@TRUNGTAMBAOHANHIENTUTHAIBINH 5 жыл бұрын

great

@fernandomartins7261 6 жыл бұрын

This product looks great, but I would like to know its input AC voltage and if it would work with 220 AC, 50Hz. Thank you

@sudiprana1183 6 жыл бұрын

thank you sir.

@gustavoreal1931 7 жыл бұрын

very good video, but not too reheated to carvonizar the plate where the soldier is led ?, and glue to be used must withstand heat, which they use?

@paulstephens7432 7 жыл бұрын

any idea when these will be back in stock?

@AlejandroRodriguez-pd7xn 7 жыл бұрын

exelente informacion

@stevesirak 6 жыл бұрын

That was awesome thank you so much

@tschupbach Жыл бұрын

Used this to repair several strips without having to buy new ones. Removed individual LEDs from an old discarded strip and reinstalled on the one going into the TV. A word of caution. If working on the LED next to the power input jack of the strip, use Kapton tape to hold the power jack in place while working the LED. I had to go hunting for mine after if fell off along with the removed LED!

@sohandhakad158 7 жыл бұрын

very good sir

@abilashrajasekaran1348 7 жыл бұрын

are these led strip standard to all tvs of same size or it varies

@banio62 7 жыл бұрын

Thanks for videoI was of help to repair my tv

@joaquinarroyolopez1026 5 жыл бұрын

Hi, I saw your videos, so.... you know what kind of led using on tv like this?

@josesoares476 6 жыл бұрын

Good evening I'm interested in buying but I need to know if I work with 220vac thanks

@junsorianojr 7 жыл бұрын

hey bro, the link that you are given it say access denied, i have samsung led 40' smart tv, the LED was burn, how can i order to your items? TIA

@naldoporto3189 5 жыл бұрын

Hello Friend Does this trouble and bi come back or do you have the voltages of 220v and 120v?

@skroggy1 7 жыл бұрын

after lightning knocks out an led tv. Can a circuit board be damaged without visual burns or broken components?

@deanheisey9234 6 жыл бұрын

Still having problems with even a standby elite coming on on flip tv after replacing power supply

@ThePHILALLENSHOW 8 жыл бұрын

how cool

@gamingvids3966 6 жыл бұрын

Quick question........what if the board is really burnt around the led light? Is it fixable after this or must replace whole strip?

@kazaboot5477 6 жыл бұрын

Hello i would like to Order that tool for replacing leds (smd)

@hamdani5502 5 жыл бұрын

Thanks u...

@jaikumar1575 6 жыл бұрын

Super idea

@m.a.kaderjibon5709 7 жыл бұрын

super

@kurtstone1272 Жыл бұрын

How did you know which LED to replace it with?

@gontlemangphologolo3329 7 жыл бұрын

How much do you replace screen for STL-43E390M LCD Screen

@SpikesMavic 2 жыл бұрын

What temp does the plate go to ?

@lmelectronics6773 3 жыл бұрын

Sir wer u buy a rework station heating, for led beads

@simonsim1759 6 жыл бұрын

I wish to know whether Panasonic THL55ET5K Led TV has any Led strip

@Limonta51 6 жыл бұрын

Buena herramienta pero muy sucio el trabajo, con el calor de la plancha los difusores salen rápidos y fácil de limpiar el pegamento, después retirar la soldadura vieja, limpiar con alcohol isopropílico y luego aplicar pasta de soldadura para luego asentar el led nuevo en frío para al final colocarlo en la plancha para fundir la pasta de soldadura.

@uzairuabdullahimuniya9620 6 жыл бұрын

I need help my dvd loptop, it's showing light only but its Born by hi voltage, which I.C can I changes.

@CptVarol 6 жыл бұрын

tell me how can i see with sort of smd i needed

@Vignesh13889 5 жыл бұрын

Vu 32inches TV light problem. If I want to fix . How much voltage light I need to buy?. Pls reply or give backlight buying link.

@brodyjorgensen2663 7 жыл бұрын

I need a led driver for ns-42e470a13 do you have anything that will work?

@vijendermann94 6 жыл бұрын

Great

@thesinwagin 6 жыл бұрын

Hello, I have a 5 led strip that does not light when 15v is applied. However, if I test each led individually with 3v, they all light. whats the deal?

@vikasjain6083 7 жыл бұрын

Dear shop Jimmy I am from India and tried open your website to purchase strip rework station but your website is not working so helpme out from where i can why the same product.

@ntelplc3024 6 жыл бұрын

Nice

@allenfrancisofloda1436 6 жыл бұрын

Hi, hello I'm AL from the Philippines, I would like to ask if where can I buy or how to buy a led strip rework station ? Thanks!

@marktu7200 7 жыл бұрын

Can you give me some advice? My Samsung tv un55d6400ufxza only has blinking red , can't turn on

@westly214gulay 5 жыл бұрын

how if 96pcs led beads replsce how long i replace it if 1x1

@ybenihime8757 7 жыл бұрын

Why your website is offline ?

@hanipbuhay 2 жыл бұрын

New friend, Full support Godbless.

@chilli1chilli 6 жыл бұрын

Thx Man we did it! Your movie is very helpfull and usefull! I going to follow your channel! Thanks a lot!!!!!!

@jamesfowler489 2 ай бұрын

can this be done for monitors and all-in-ones or is this specific to tv's

@pasangsherpa988 4 жыл бұрын

What is the price of led strip rework

@Swenser 4 жыл бұрын

I recommend two soldering irons used in a tweezer action. Needle point tips and it's too easy. One question, how do you check which voltage led to use? 3 ,6, ?? I got a Hisense. Many leds gone. Will order cheaply from AliExpress but not sure if 3 or 6 v. I used 8 v across two good leds and they shine quite brightly. I'm guessing 3v. Edit; there are numbers on the strips that led me to the correct led from aliexpress. 50 beads for 2 bucks.

@MrMiljan407 4 жыл бұрын

Hm, Hisense. Koliko je star TV ako nije tajna?

@jeffescortlx 8 жыл бұрын

It makes me a little uncomfortable you didn't wick off the old (probably lead free) solder and apply new solder with a little flux and clean. Thanks for making and sharing these videos!

@markgray1089 5 жыл бұрын

I am guessing these important steps were missed out for the purposes of this video

@awamamar 7 жыл бұрын

les leds sont differentes quelle type vous employées et merçi

@griffon3275 7 жыл бұрын

Instead of using the Heat station he used I tried a iron for clothing to no avail then placed a 3X5 piece of 1/4 inch thick metal plate (scrap) in home 5 inch work vise and then took the strip and placed over it and held it in place using a C-clamp you can use channel locks whatever to hold and then I used a propane torch just like ones almost everyone has for old-style brass plumbing soldering etc and heated the bottom of the plate. remove the white round sticker around the LED first as this will melt it is only there to reflect light and removes and installs easy and gluing the diffuser back on holds it in place no matter what . this method removes the LED in about 45 seconds you will her a fizzle and pop that lets you know it can be removed installation is the same . if you set up stands to support the strip you will not need a C clamp

@ldlm91 7 жыл бұрын

did it work?

@paparaothota5487 7 жыл бұрын

Where this machine found in india how much cost

@lejlajelacic5268 5 жыл бұрын

Interesuje me dali se mogu poruciti diode za lg32 inca

@kennethpappas 5 жыл бұрын

How hot is that plate?

@leohobbleohobb3781 4 жыл бұрын

tested R2 half of led strip.it does not light up.But if i put power on 1 and 1 led ,i find that every led works on it,s own .The led.s on this strip is ok.It has to be a failure in the strip it self.if i use a mutimeter and test continuity on plus test point and the other lead on the plus on the male part where it goes into L2 it has contact.On minus it dont when i do the same.Does the copper traces fail on these strips?

@pcbfoghorn 4 ай бұрын

I have one with same problem. A vid I watched here on YT said that YES. Mine also tested bad on negative side of the strip. The vid. instructed to look for spot on strip (neg. track) and that would be where problem lies. I don't know if patching it is worth the try or if it would be safe or not. I bought a new strip.

@samuelordanel2631 2 жыл бұрын

Do you also selling parts only, let's say LED or LED strips?

@dcowboys6213 3 жыл бұрын

are the leds universal???

@Steveh112 5 жыл бұрын

I'm working on a 50" LG TV that all the LED lenses keep falling off. All of the LED's are good and I haven't had to replace any of them. The only problem is the lenses falling off causing bright spots on the screen. Has anyone else ever had this problem with an LG? This is the 2nd time it's been back. I glued them all back on a couple months ago and they all fell off again. I cleaned all the old glue off with a knife and cleaned both surfaces with alcohol to get rid of any possible contamination. I used Locktite brand superglue gel but they're just not sticking. I glued them on 10 hours ago and I can lift them right off with very little pressure. Any ideas on how I can get them to stay on permanently?

@poovannank9390 7 жыл бұрын

dear sir,my thoshiba TV video very dull like a shadow voice is OK. how to check backlight is OK.please reply

@josefinodeleon5940 2 жыл бұрын

How to repair the power supply for ledbackligth samsung 40"

@clonerick 7 жыл бұрын

Hello what kind of led use to replace i have a samsung and i am looking for the led that uses led strip Samsung BN96-25300A

@emielzijlma1895 7 жыл бұрын

Did you manage to find the LEDs for the BN96-25300A? I would like to know this as well.

@junsorianojr 7 жыл бұрын

i need 7 strips, or LED lights only TIA

@MrArcadianSir 7 жыл бұрын

What type of LED did you replace it with?!?!/ Where do you get them?!?!/

@riotintomaršsadrine 6 жыл бұрын

Arcadian Mister 1000pcs FOR LG Original LED LCD TV backlight lamp beads lens 1W 3v 3528 2835 cool white light bead s.aliexpress.com/AJBVrqqm?fromSns=Copy to Clipboard

@jilllouden1643 3 жыл бұрын

LG Innotek LATWT470RELZK 1210 (3528 2835) 1W 100LM Cool White 3V 400mA are the originals for LG TVs

@SodiRepair 7 жыл бұрын

Hello, what is the temperature of this tool

@mikkifreeky 7 жыл бұрын

it must be at least 200°C

@electroniceAZ 7 жыл бұрын

LED manufacturers say max. 260°C, 10s. On the site (http: //www.shopjimmy.com/catalog/prod ...) I do not have access from Romania. Here, home made: rusuelectronics.blogspot.ro/2017/04/plita-pentru-lipit-led-uri.html

@atoms1013 4 жыл бұрын

What number of led is that sir?

@8nationalparkers442 7 жыл бұрын

I have a LG LN 5100 50" 1080p 120Hz LED HDTV. TV will turn on, there is sound but the LEDs will only flash during power up. Picture is there, just very dim. I Need some help!

@eddiereichel9354 7 жыл бұрын

do you have a multimeter?

@fortunatusukachukwu2132 6 жыл бұрын

Kurt Parker change the led strips it will come up

@johannesbotha3599 6 жыл бұрын

hi thats faulty backlight put meter on diode setting and measure across each led good ones should light up bad ones wont...mark and replace...

@lennythorpe Жыл бұрын

what's the p/n for the replacement LED's?

@mrguna3530 4 жыл бұрын

Your Using glass joing Paste Name.... Answer me

@dakodakelley897 7 жыл бұрын

My tv shows a standbye light but when I turn it on the screen gets dimmer and dimmer then turns off

@cesarmartinez9846 4 жыл бұрын

Sir good evening how to unlock key lock?

@wortex8228 3 жыл бұрын

My master Philips 32BLD4012N / 62 has 2 LED bars on the TV, there are 6 LEDs on the bar. There is no sound, there was no image, I changed the LEDs, they did not light. There is 13 v electricity to the sockets but it does not light up. I wonder why

@avincaa 6 жыл бұрын

Boa noite. Como que faço para comprar este aparelho de soldar Led? Estou aqui mo Brasil.

@tvtecnica8750 6 жыл бұрын

Jose, ele não te entendeu, escreva em Inglês, no Google tradutor. Sua pergunta seria essa: (Good evening. How do I buy this LED welding device? I'm here, Brazil.) Ele não te responderá onde comprar no Brasil, mas poderá te indicar o Aliexpress ou outra empresa internacional.

@aetuo7 6 жыл бұрын

Subscribe to my youtube channel please

@jacquylenoir9097 6 жыл бұрын

Un simple fer à souder suffit, aucun besoin de dépenser pour cet appareil A simple soldering iron is enough, no need to spend on this device

@mikeoleksa 6 жыл бұрын

Would not removing the old glue from the LED strip cause a "halo" effect shining through the screen when the TV is reassembled? It makes sense if the height of the lens is that sensitive.

@genaugmen4505 6 жыл бұрын

No, because there are diffusing layers between the back lights and lcd to distribute the light evenly across the entire screen.

@olivierj.2435 Жыл бұрын

@@genaugmen4505 what about led heat dissipation ? If there is no gap between strip and difuser maybe it will go hot

@genaugmen4505 Жыл бұрын

@@olivierj.2435 The diffuser is domed on the underside and has feet. The rear cover the led strips are mounted to is sheet metal and acts as a heat sink

@epeixel1 7 жыл бұрын

Hello. Where can I buy a station like this in Europe? Thanks, Luís Nazaré/Portugal

@davidbrown5357 7 жыл бұрын

Luis Estrelinha EBay I seen one for sale that had a Euro plug. It was a used one but it shows someone had to buy it new in Europe.

@kundrew1990 2 жыл бұрын

I just tried and it only works when i reverse the pos and neg?

@ricardodavila5223 7 жыл бұрын

Cual es la temperatura de la estacion?

@digitaltrading123 5 жыл бұрын

250ºC

@davidbrown5357 7 жыл бұрын

Is super glue and crazy glue the same thing ?

@darrylt1031 5 жыл бұрын

yes.....both are Cyanoacrylates

@oscarsne1 7 жыл бұрын

Where can i buy the led

@ekenebossEkene 2 жыл бұрын

What's the name of the machine

@nimeshmistry6014 7 жыл бұрын

Where can we get the new Replacement LEDs and could we use heat gun instead to remove the old LED and put new in...?

@LizardKing12FiftyOne 2 жыл бұрын

I'm thinking of using heat gun, did you end up doing it? did it work?

@user-we7jt1mc9d 2 жыл бұрын

👏👏👏

@wellcomepakistan5937 5 жыл бұрын

dear tell me this deciece name

@morgsjnr 7 жыл бұрын

What LEDs are these? I'm in the UK and desperately need to buy some. Many thanks.

@surajmaske5338 3 жыл бұрын

Samsung 32" Samrt LED TV Backlight Replace Part Number please

@mohammedmariff9034 4 жыл бұрын

what is the ( single led size and type ) am getting in the busniess and want to order from aliexpress .. what are the most common sizes used in led lcd oled tvs ?

@hshhshgghss9354 6 жыл бұрын

मारा एलईडी टीवी कला दबा kasa teek करा hende माह देकआ

@tiodeivit 7 жыл бұрын

No esta explicaddo como limpió la soldadura vieja ni como ni que tipo de soldadura nueva usó

@rictraynor5259 2 жыл бұрын

I wouldn't go poking at the LED's face with tweezers, especially when they are hot. They can be damaged easily.

@Minion-pq7vj 6 жыл бұрын

I replaced all my boards then found one bad led. Could this cause them all to shut off? There are three different strips in my Samsung

@visualhub7196 Жыл бұрын

Yes

@visualhub7196 Жыл бұрын

When one led goes bad.. there's an open circuit for the LED's and they are connected in series not parallel

@YoStu242 4 жыл бұрын

If your TV has few burnt LEDs don't do the same mistake as I did and only replace those faulty LEDs. Joy of working TV is quite short lived and dark spots soon start to reappear on the screen as rest of the old LEDs die one by one. Either replace them all or bin the TV.

@GeorgeGeorge-xj2bc 7 жыл бұрын

The horrible in led strips removal from the metal casing is that first all these plastics that you have to remove carefully and then the lcd glass with its thin film connectors without any damage permanent and unrepairable to the glass.And why after all that mess someone should not replace all the led strips with brand new ones avoiding the same difficult procedure in the near future for the next burnt led.Funny,hobbyists seem to be more repair minded than professionals just because they dont know what is awaiting them.

@delkana80 4 жыл бұрын

That station thingy is 40 bucks on amazon 😂 I use ac heating element. only cost me like 5dollars lol

@hotlava2222 2 жыл бұрын

after replacing led i get these round rings "circles"

@lasvegaslucky9903 Жыл бұрын

I know this question is maybe stupid! Regardless I need someone's help. (Q- can I use a flashlight led to replace the bad led's on my tv??)

@pubginc.7328 Жыл бұрын

Yes you can but it's needs to be the same brightness as the old one's or else if they are brighter, it's going to leave bright spots, and if they are dimmer then you'll have dark areas on the screen