How to Replace Spark Plugs 09-18 RAM 1500
Рет қаралды 328,845
Shop for New Auto Parts at 1AAuto.com 1aau.to/c/243/aa/spark-plugs
In the video, 1A Auto shows how to remove and replace old or dirty spark plugs. The video is applicable to the 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, Dodge Ram
This process should be similar on the following vehicles:
2009 Dodge Ram 1500 Truck
2010 Dodge Ram 1500 Truck
🔧 List of tools used:
• 10mm Socket 1aau.to/o2f/1AXAA00017
• 8mm Socket 1aau.to/o2f/1AXAA00017
• 5/8 Inch Spark Plug Socket
• Ratchet 1aau.to/oagQ/1AXAA00016
• Socket Extensions 1aau.to/oaap/1AXAA00015
• Torque Wrench 1aau.to/oK3/1AXAA00044
• Dielectric Grease
Subscribe: / @1aauto
Check out our playlist:
Ram 1500 Pickup 2009-Present 4th Generation: • Ram 1500 Pickup 2009-P...
For More Info visit us at 1aau.to/h/bDm/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
@1AAuto 3 жыл бұрын
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@jaredshelton-nielsen6058 3 жыл бұрын
Have a list of tools you need?
@housghost7869 Жыл бұрын
Not sure if people realize how important it is to be very thorough in explaining everything step by step. You made this easier for so many people who probably aren’t used to working on their own vehicle, thank you for such a awesome video with amazing instructions on getting the job done.
@Nad16z6 Жыл бұрын
The best ram 5.7 spark plug tutorial on KZfaq thanks 1AAuto
@victorbuehler9482 7 ай бұрын
Thank you for showing us how you got number six cylinder spark plugs out. You're the first one I've seen do that out of seven videos, much appreciated, thank you.
@sdothenderson 6 ай бұрын
Man... this guy has helped me do 2 jobs on my RAM. He's very detailed. Funny asf too 🤣🤣🤣... Ad-Libs alot
@DVTOM Ай бұрын
As a long time tech, I found this video to be well done and thorough. People don't realize the little things that pop up needing think out of the box solutions on the fly.
@bblazeff1 3 жыл бұрын
It would be alot easier to remove the 10 mm bolts, if I COULD FIND MY 10 MM
@jsboening 2 жыл бұрын
My neighbor probably has it
@cha-ka8671 Жыл бұрын
I learned a long time ago to buy a few cheap ones. You know you’re going to use and lose 10 mm’s.
@iiinixkiii2346 Жыл бұрын
Just weld a screwdriver to it. Much easier
@tobenbrinigar4506 2 жыл бұрын
This was a very helpful video for my 12 RAM HEMI. I will say the most challenging pair of plugs for me was the rear passenger side.So many hoses and cables in the way. Brake booster side was no problem other than the LONG reach.
@larryweaverling6246 Жыл бұрын
Replaced my plugs 2012 5.7 Hemi today, took my time-prepared for the worst but was easier than I thought. Installed Iridium plugs, runs like a dream. I used 2 different magnetic spark plug sockets for different locations.
@1AAuto Жыл бұрын
+Larry Weaverling Thanks for the feedback!
@jasonseifried7192 7 ай бұрын
Thank you for all your help. After I watch your videos I feel obligated to purchase any parts off of y’all’s website. Because your company actually takes the time to show you how to do it and do the job right
@davidfusco6600 3 жыл бұрын
Len is the Mr Rogers for us car guys! Easy to follow clear instructions, no cussin’ good camera work.
@erikk27a 3 жыл бұрын
We need more cussing!
@jaeb.2842 4 жыл бұрын
Love this channel! My go to channel when I need to fix or replace something on my truck!!! Keep up the great work!
@terryhoffman2760 2 жыл бұрын
Very good video. He makes it look fairly easy . My 2004 ram took over 3 hours with some bruised knuckles. It was worth the time. Thanks
@bobert5785 4 жыл бұрын
2009 Ram 1500 went relatively well. Thank god for the wiggle ratchet suggestion. Never would have completed the job without it. Great video.
@1AAuto 4 жыл бұрын
+Robert Black Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
@jaeb.2842 3 жыл бұрын
Love this channel! Always learning something and great store to buy parts from! Please keep posting videos of the 2014 Ram 1500
@cindyscherger3339 3 жыл бұрын
Man your good at not swearing. I just did my spark plugs and there was a lot of cussing plus my truck is lifted so that made it a bit harder
@1AAuto 3 жыл бұрын
+Cindy Scherger Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@jsprdn 4 жыл бұрын
This video was great, thanks! It helped me tackle this daunting task in just over 2 hours. Having a universal joint socket and a few various extensions to go on a normal spark plug socket was definitely the key. Thankfully with my long arms I was able to get to the rear most plugs with a step stool and reaching under and over the brake booster.
@1AAuto 4 жыл бұрын
+Jordan Smith Thanks for checking us out! 1AAuto.com
@BoopSnoot 3 жыл бұрын
V8 guys often mock the rice rockets, but this job takes five minutes and no dexterity on a typical inline-four cylinder FWD hatchback.
@RiseOfAnarchism 2 жыл бұрын
@@BoopSnoot changed my plugs on my lunch break and still had enough time to get food
@Mike_81 Жыл бұрын
It took me almost 6 hours to do
@Atimar1 4 жыл бұрын
First time watching one of your videos, and my first thought was "This guy is really informative and descriptive. He gives quick and concise information on what he is doing." Well done! LIke you said at 12:45, keep it as short as possible but still informative for the sake of the video.
@1AAuto 4 жыл бұрын
+Atimar Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
@Cheerdad13 5 ай бұрын
Awesome video, well done explaining the fine details, but also letting us know what size and type tools you need to get the job done.
@JEEPLIFEOZZY 4 ай бұрын
I am NOT a super handy person at all. I do follow directions really well. This video was amazing. I was able to fix my cylinder 4 misfire perfectly. Lost a 10mm in the process but.. ehhhhhh 😂. Just wanted to say thank you for your attention to detail. Have a great day!
@elroco4827 4 ай бұрын
Just did mine yesterday(3-16-2024). This video taught me how to do it. 16 plugs is no joke and it was my first time ever doing it. I broke 2 red locking tabs on the coil connector and I used the slightest strength but it still broke. It still clicked and locked without the red tabs. Thank you for the video.
@1AAuto 4 ай бұрын
+@elroco4827 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@brianp6180 2 жыл бұрын
Great video! I heard people say how hard the plugs were on the 5.7 hemi. Looks pretty easy. I will find out in the morning!
@conservativetexan2289 2 жыл бұрын
So how did it go?
@GLCUSTOMS Жыл бұрын
@@conservativetexan2289 its a lot easier then it even looks on this video. After you do it one time it's like riding a bike you'll never forget it 👌
@dixienormus4002 4 ай бұрын
Love the videos thank you glen did my whole front suspension off of your videos saved me a lot of money now doing plugs and coils
@tvilla6466 3 жыл бұрын
Excellent video, very well explained. SHould I be using copper grease on the threads of the spark plugs?
@smitr123 4 жыл бұрын
Dielectric grease or silicone grease actually resist electrical flow, its only there to seal out moisture and debris, not help the electrical conductivity. Nice video 👌
@1AAuto 4 жыл бұрын
+Ryan Smith Thanks for checking us out! 1AAuto.com
@alexeadie6109 4 жыл бұрын
Great video. Really impressed with your attention to detail. Awesome job giving us all the information you could possibly think of. Greatly appreciated!
@1AAuto 4 жыл бұрын
+Alex Eadie Thanks for checking us out! 1AAuto.com
@efrencastanedajr1509 4 жыл бұрын
Thank you for the the video. I have a 09 Dodge Ram 1500 SLT 4.7L, what will be the correct replacement for all 16?
@jbrown788 Жыл бұрын
I started hardest first which is back, much easier. done myself, video very helpful thank you.
@imatt6566 Ай бұрын
Wow.. Extremely good video. Props to the mechanic speaking and turning the wrenches.
@iamjher Ай бұрын
Great video! I'm not new to changing spark plugs, just new to the Ram! Thanks. 🎉
@oifvet2x 2 жыл бұрын
Great video! The presentation of the video gives off the adult version of Mr Rogers neighborhood. Time to subscribe
@joeteich7237 Жыл бұрын
Regarding dielectric grease; I use it to prevent spark leakage and spark tracking inside the plug boot. GM and Ford were bad about that, leaving a carbon track inside the boot causing misfire. No reason Dodge wouldn’t do the same, so use it. The terminal inside the boot will fit over plug , and the grease will not interfere .
@brettinnj 2 жыл бұрын
Great video. Most informative video I've seen yet on the subject.
@stephenmcgraw3610 3 жыл бұрын
I have a 2015 Dodge Ram hemi I’m planning to do mine tomorrow I will do it one by one like you did thanks I’m glad you mentioned the torque specs for the spark plug 13 ft pounds
@1AAuto 3 жыл бұрын
+Stephen Mcgraw Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
@stephenmcgraw3610 3 жыл бұрын
Are the mopar spark plugs already Gap for the dodge truck i believe its .043
@DL101ca 2 жыл бұрын
@@stephenmcgraw3610 the newer type are 15-18 ft pounds. Gap is .043-.044 for iridium I think they come pregapped at .044
@xrillo281 3 жыл бұрын
Pro tip: if spark plug gets stuck in engine, spray some penetrating oil down barrel and wait half an hour! Two of my plugs were stuck, sprayed the pen oil, waited and boom they came out finally lol. I started changing plugs at 8am, finished by 1:30 lol. Had a few delays but went well! Also I recommend laser iridium! Those plugs are amazing!
@sergjavier1582 3 жыл бұрын
What did you gap them at?
@DL101ca 2 жыл бұрын
@@sergjavier1582 They come pregapped and as long as they haven't been dropped, you just need to check and not gap anything. Gap should be marked on a sticker under the hood (.044 gap).
@NorthernMontanaHomestead Жыл бұрын
I'm going to be trying to do this for the first time ever tomorrow. Do you ever have to test your coils for replacement when you're changing the plugs?
@brianw8751 11 ай бұрын
been dreading this. Appreciate the walk-through Len
@Wally-pu2hh 2 жыл бұрын
I'm using the rubber socket in cold weather , and it comes off so use magnetic in cold weather if outside
@harleygrimes6597 2 жыл бұрын
Great video. Very informative and insightful. Great job. 👍
@jimeckenrode1271 3 жыл бұрын
That was an excellent video. You made it look easy even the two on the left rear of the engine.
@codacreator6162 3 жыл бұрын
Remember when engines had a little tolerance for dirt? Yeah. Me, too. My first car was a 1969 Pontiac Le Mans. Nothing under the hood but engine, battery, and radiator. Tune ups were easy peasy. No canned air required.
@lilcourtny08 2 жыл бұрын
Less tolerance means less reliability
@robwells5753 2 жыл бұрын
It gets better: by 2026 the Gov has ordered all cars be be equipped with a "backdoor shutoff.
@terrygeorge8502 Жыл бұрын
Do you think it’s important to use molar spark plugs? Thanks for the video. Was going to use a mechanic. Do most of the work on my truck myself so pretty safe to say I can do it on my own. Thanks again
@user-gz8hn7iy3g 8 ай бұрын
Thank you for an other great video. I have watched some of your other videos and they were great as well. I have a question regarding the reason I am thinking of changing my spark plugs. My truck has 131000 miles on it, I bought it used so I am not sure if the plugs have been changed or not. The truck feels like it has a misfire or what I would describe as a surging or a hesitation while I am driving almost like a subtle bucking. When I first start out from a spot light, it definitely bucks more noticeable but then goes into the more subtle bucking. I have no check engine light on and I have run it on a scanner with no DTC's. It feels like a misfire to me so I am thinking it could be the plugs or maybe the coils. Your thoughts? Is there a way to check the coil to see if maybe one has gone bad? It has been doing this for a while now and I am concerned it will cause damage. I'm not sure if this is the forum to as questions like this because I don't see any recent comments but I am hoping someone is monitoring your channel and can give me some help or direct me to the right spot. Thank you in advance.
@jackcedillo4596 2 жыл бұрын
Great job..with step by step..awesome job
@bernie472 3 жыл бұрын
Good video, however the NGK website says that if your using an iridium plug in an aluminum head, with a gasket, then the Torque should be 18-22 ft pounds of torque.
@luismanuel5423 3 жыл бұрын
True, doing mine soon thanks for the heads up
@fullsteam208 Жыл бұрын
Thank you. Install the plugs dry? or with a little antiseize?
@matthewknotts7003 4 жыл бұрын
Solid video, about to dive in to this project myself on a 12’ ram. Thanks for the knowledge!
@abelvillarreal5383 4 жыл бұрын
How'd it go? I need to do mine too
@oryan404 4 жыл бұрын
Was it hard to get to like this? I have a 2012 ram also.
@J_Braz_ 3 жыл бұрын
I got a 12 too. Already cleaned the throttle body. Trucks at 68k miles. Definitely time for a tune-up
@rscottrogers22 2 жыл бұрын
Doing this on my '12 Ram now. Not as easy on the back ones.
@acrobatiqa 4 жыл бұрын
Very detailed video as it have to be. Great job. Thanks a lot👍
@1AAuto 4 жыл бұрын
+Happy One Thanks for checking us out! 1AAuto.com
@elchavito4372 3 жыл бұрын
After watching this ready to hit it boys. Great video, you guys can make vids to train mechanics
@1AAuto 3 жыл бұрын
+El Chavito Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
@rickyazua587 2 жыл бұрын
This should be something a young boy can do lol
@MarsMedigrow 2 жыл бұрын
Question. I have a 2012 Ram 4.7 and I hear you need 8 intake and 8 exhaust spark plugs. Two different types are required apparently. Is this correct?
@junioro4096 4 жыл бұрын
Excelente Video gracias.
@ZbysioR 9 ай бұрын
im curious what is safe to lean on when you are inside the bay. im a big boy and im worried to brake something when im leaning on top of the engine parts
@badsketcher3281 4 жыл бұрын
Thank you awesome video just did mine thanks to you. I need help i cant seem to find the throttle positioning sensor on my 2012 dodge ram big horn I need to replace that but can't find where it is. Please help
@foxbodyguyeightyeight3672 4 жыл бұрын
Your truck has two one is integral to the throttle body and the other the accelerator pedal
@cruzmartinez666 5 жыл бұрын
Awesome video man. Thank you.
@1AAuto 5 жыл бұрын
+Cruz Martinez Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@MrXSeanzillax Жыл бұрын
Is that anti seize you had in the filter box? Should that be used because the heads are aluminum?
@nicokek7761 4 жыл бұрын
Love you guys! You make that spark plug on the driver side rear look easy! Took me a hour! Lol
@1AAuto 4 жыл бұрын
+Nicoke K Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
@xsocquet 3 жыл бұрын
Thank you from France !
@robertotrevizo9981 2 жыл бұрын
What sparkplugs is better for a 2010 dodge ram 5.7 hemi?
@r.p.mcmurphy3222 3 жыл бұрын
Easy. Thank you!
@travelwithme.1238 Жыл бұрын
Well explained.. I like your videos.
@roysilva6358 5 ай бұрын
Este fue el video que mas ayudo 👌
@ontogeny6474 3 жыл бұрын
Excellent. Thanks!
@maximilianogarcia7024 3 жыл бұрын
Is little hard job, thanks for this video, is very helpful.
@1AAuto 3 жыл бұрын
+Maximiliano Garcia Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
@chrisbolz8579 2 жыл бұрын
What's the recommended Gap for the hemi 2010
@edbaines8384 Жыл бұрын
I use a piece of hose and slide it over the back side of the new spark plug to snake it back in those tight spots,spin and pull hose out of the way… works good
@jonchristian8040 Жыл бұрын
Just curious at what mileage is recommended to replace your spark plugs? I read that factory recommendation for Ram 1500 is roughly 50,000km but that seems very low. Also, great video thanks for the help.
@mronemanband1 Жыл бұрын
every 100k
@jimsaetta6770 13 күн бұрын
Helpful tip, leave the coil pack under the booster out before doing last 2 plugs, gives you a little more room.
@WeightsNGunz 3 жыл бұрын
Great video! Thx
@jesserabel6419 2 жыл бұрын
I didn’t see anti seize used on the spark plug threads. Is it not a necessity?
@prayloudly3983 Жыл бұрын
How often does this really need done if its running just fine now?
@oscarh897 4 жыл бұрын
great videos please keep doing videos like these
@1AAuto 4 жыл бұрын
+Oscar H Thanks for checking us out! 1AAuto.com
@charlesharris7158 10 ай бұрын
Wow great video thank you.
@terryb4563 4 жыл бұрын
On torque of plugs you say 13 max 15 ftlb, what I have read is that is for 08 and older where 09 to 18 is 18.5 ftlb to 22.5 ftlb, am I mistaken?
@bernie472 3 жыл бұрын
No. Your correct. 13' model year and older with copper or platinum plugs is 13-15 ft pounds. 14' and up with NGK Iridium plugs is 18-22 ft pounds. But if the Iridium plug your using has a tapered end, instead of a metal gasket, only then your supposed to torque it down to 14-15 ft pounds.
@danielrevo5456 2 жыл бұрын
It does not matter what order the coils are put in. Coils are coils.
@pureblood5004 2 жыл бұрын
Stupid question, if I have a cylinder 8 misfire, how do I know which one is the 8th cylinder?
@ricardocorsa9077 Жыл бұрын
Great video? Whats with the rainbow🌈 colors ? Just wondering
@robertfmccarthy2360 9 ай бұрын
Great & informative
@miltonherron9237 2 жыл бұрын
Nice job
@renezepedarepreza7576 3 ай бұрын
Thanks another great video
@sonnysaskatchewan1005 4 жыл бұрын
Yes great video thanks guy's
@1AAuto 4 жыл бұрын
+Sonny Saskatchewan Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
@Hoppy1571 4 ай бұрын
Are these Iridium plugs, with a preset gap?
@AlexSantana-ch2ox 2 жыл бұрын
How much torque should be applied ???
@jm1551701 4 жыл бұрын
I have a 2011 Ram 1500, and according to the owners manual on the Hemi motor's the plugs should be changed out every 30.000 miles, do you agree with this, I already swapped the plugs out at the first thirty thousand, the truck now has 62 thousand on the clock, what are your thoughts on this?
@ElkinsEric 4 жыл бұрын
Joe Marco if you used copper plugs then yes, you should change them every 30k.
@jm1551701 4 жыл бұрын
@@ElkinsEric Thank You,
@ramtrucks721 Жыл бұрын
What brand Spark plugs does factory use?
@AFPanduhh83 Жыл бұрын
Sooooo No thin coat anti seize on the threads of the spark plugs.?
@phil9187 3 жыл бұрын
thank you sir
@xxdanielxx5084 4 жыл бұрын
Is this the same procedure for 2011 5.7 as well or is it different?
@lowflynn1789 4 жыл бұрын
xXDANIELXx same
@bobcat3102 2 жыл бұрын
Good video.
@gabes9320 Жыл бұрын
Are the specs the same with the v6?
@elv1ejon481 Жыл бұрын
Great job 👍🏾👍🏾👍🏾👍🏾
@jasonadams9809 7 ай бұрын
Can I use 0.044 gap instead of 0.043 on 2009 dodge ram
@odaliRey Жыл бұрын
Thanks brother
@richh9570 4 жыл бұрын
Hey great video, is there a specific pattern the spark plugs need to go in? Or are all the spark plugs the same and doesn't matter where they go?
@danieleifert1220 4 жыл бұрын
All the plugs will be the exact same so you can do it in whatever order you want!
@joe7528 2 жыл бұрын
Spark plugs have no set orientation however the coils packs do so make sure you place each pack the same location that you removed it from
@mannymendez7504 10 ай бұрын
So if there is rainbow colors what do you suggest
@gabrielsoto2911 2 ай бұрын
What I don’t understand is why people don’t show how they got the rear clips off
@Collector57 3 жыл бұрын
Out of curiosity, is there a torque spec available for the coil-pack bolts?
@brycerlsrobertson9100 2 жыл бұрын
No he just mentioned to get it snug since it's plastic you don't need to torque down super tight or you might damage the valve cover
@DL101ca 2 жыл бұрын
Half ugga dugga. They're there to hold the coil from moving under engine vibration, no need to tighten them more than snug, you're not sealing anything or holding moving parts.
@frankagatielli7881 2 жыл бұрын
WOW, just got an estimate from Dodge to replace the spark plugs on my 2012 Ram 1500 Hemi. Well with no issues it was about $650.00, does it sound in the ball park.
@DirtyMsDee Жыл бұрын
Too much! Do it yourself.
@BlakWiseCracker Жыл бұрын
I paid $950 at the Dealer, only because I have a Bumper to Bumper” warranty for the life of the vehicle or as long as I possess it. A 2014 Ram 1500 R/T 2wd ✌🏻
@ericcross9788 2 жыл бұрын
That is almost like the 2011 ram 1500 with the 4.7 it has 16 plugs. But it is the 8 for the intake and 8 for the exhaust.
@cast1283 2 жыл бұрын
I have a cylinder 2 misfire after replacing my plugs anyone know hitch cylinder is that?
@edw6114 Ай бұрын
This guys awsome !
Reignited - Cycle and Automotive
Рет қаралды 780 М.
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 360 М.
GREG_ALBERALLA
Рет қаралды 652 М.
Reignited - Cycle and Automotive
Рет қаралды 47 М.
AmericanTrucks Ram
Рет қаралды 793 М.
Stinger
Рет қаралды 186 М.
Анастасия Адаева
Рет қаралды 10 МЛН
OYBOY
Рет қаралды 1,1 МЛН
jamoloniy
Рет қаралды 1,8 МЛН
Макс Ващенко
Рет қаралды 1,3 МЛН