Buy Now!
New Rack & Pinion Assembly from 1AAuto.com 1aau.to/ia/1ASTG00012
This video shows you how to install a steering rack and pinion on your 2005-2010 Pontiac G6. The rack and pinion assembly transforms the turning motion of your steering wheel to the push and pull motions that turn the front wheels of your vehicle, as well as adding the power assistance. If the steering rack on your vehicle is leaking, or damaged in some way, you might need to replace it entirely.
This process should be similar on the following vehicles:
2005 Pontiac G6
2006 Pontiac G6
2007 Pontiac G6
2008 Pontiac G6
2009 Pontiac G6
2010 Pontiac G6
Tools you will need:
• Pry Bar 1aau.to/oc/1AXAA00020
• 18mm Wrench
• 21mm wrench
• 11mm Socket 1aau.to/oe/1AXAA00015
• 18mm Socket 1aau.to/oc/1AXAA00043
• 19mm Socket 1aau.to/oc/1AXAA00043
• Locking Pliers 1aau.to/oa/1AXAA00139
• 1/2 Inch Air Impact Gun 1aau.to/oc/1AXAA00252
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/oe/1AXAA00016
• Torque Wrench 1aau.to/oe/1AXAA00044
• Anti-Seize Grease
• Bungee Cord
• Hammer 1aau.to/ob/1AXAA00091
Subscribe: kzfaq.info/love/WCdsftsTqYMO7cA_5Sc-yA
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.