How to Replace Strut Mount Kit 2012-2016 Subaru Impreza

Рет қаралды 7,063

Жыл бұрын

Buy Now!
New Strut Mount Kit from 1AAuto.com 1aau.to/ia/1ASMX00506
This video shows you how to install a new strut mount kit from TRQ on your 2012-2016 Subaru Impreza.
This process should be similar on the following vehicles:
2012 Subaru Impreza
2013 Subaru Impreza
2014 Subaru Impreza
2015 Subaru Impreza
2016 Subaru Impreza
Tools you will need:
• Flat Blade Screwdriver 1aau.to/objh/1AXAA00013
• Pocket Screwdriver
• Pry Bar 1aau.to/oTn/1AXAA00020
• 19mm Wrench 1aau.to/oVt/1AXAA00010
• 12mm Socket 1aau.to/obtS/1AXAA00015
• 17mm Socket 1aau.to/obtS/1AXAA00015
• 19mm Socket 1aau.to/oagy/1AXAA00043
• 32mm Socket 1aau.to/ocA/1AAST00003
• Strut Spring Compression Tool
• Needle nose pliers 1aau.to/oDi/1AXAA00051
• Needle nose pliers 1aau.to/oDi/1AXAA00052
• 1/2 Inch Impact Gun 1aau.to/osI/1AXAA00252
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obAf/1AXAA00016
• Torque Wrench 1aau.to/oaD9/1AXAA00044
• Gloves 1aau.to/o5A/1AXSS00048
• Marker / Writing Utensil
• Safety Glasses 1aau.to/oWM/1AXAA00343
• Floor Jack 1aau.to/o43/1AXAA00068
• Hammer 1aau.to/oTR/1AXAA00091
• Jack Stands 1aau.to/oTc/1AXAA00065
• Punch
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 6

@TRQ Жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@peg372 22 күн бұрын

These are easily the best instructional videos on the internet. What is the purpose of staking the axle nut?

@jlrover2k5 Ай бұрын

Thank you, great video, straight forward with details +++++, much appreciate.

@TheMoeBrown 6 ай бұрын

Excellent, concise demo.. Thank you very much! Please note - it seems that the axle nut has to be torqued to spec before loading the wheel. This preloads the hub bearing to protect it (per Subaru service manual)

@MC-yx2gn 4 ай бұрын

I don’t see a reason to remove the axel nut. I place a jack or jack stand under the knuckle, letting it fall down only far enough to make room for the strut tower to come out. It seems like an unnecessary step, unless replacing wheel bearings while apart or something .