HOW TO REPLACE THE FUEL PUMP IN A CLASS C GENERATOR // Onan 4000

  Рет қаралды 12,251

Be Free Benson DIY & more

Be Free Benson DIY & more

Күн бұрын

We were having some major generator issues, so we decided to replace the fuel pump in our Class C Onan 4000 generator. #diy #diycamper #befreebenson
Products used in this video-
Fuel Pump- amzn.to/3JXOeny
Recording & production gear-
Insta360 Camera- amzn.to/3D2S0rj
Insta360 Selfie Stick- amzn.to/3ZMlTpz
Camera- amzn.to/3csx2s5
Camera Gimbal- amzn.to/3Rjcd1r
GoPro- amzn.to/3cvC1Ig
GoPro Media Mod- amzn.to/3cBand1
Drone- amzn.to/3pY9COg
Electronics Backpack- amzn.to/3wHpvfR
Green Screen- amzn.to/3czMkew
Follow us on Instagram @befreebensondiy
To check out some of our adventures visit Be Free Benson Adventures - / @befreebenson
Disclaimer: As an Amazon Associate we earn from qualifying purchases. This is at no extra cost to you. We do not recommend any products we have not used and benefited from. Our videos are for entertainment purposes only. We are not “Do It Yourself” or travel experts. Please be sure to do your own research to determine what is right for you.

Пікірлер: 20
@ChristianRaymondFilms
@ChristianRaymondFilms Ай бұрын
Thanks for the video, I’m working on my 9 ONAN 4000 now
@befreebensondiy
@befreebensondiy Ай бұрын
Awesome! Good luck with everything!
@hondaxl250k0
@hondaxl250k0 25 күн бұрын
I’m doing mine now too. Don’t look fun.
@ChristianRaymondFilms
@ChristianRaymondFilms 25 күн бұрын
@@hondaxl250k0 definitely a tight squeeze, everything is that generator area is completely near impossible to work on still mounted to the RV. I can barley get my hands in anywhere and lost a bolt underneath the housing, magnet definitely helped me there
@hondaxl250k0
@hondaxl250k0 24 күн бұрын
@@ChristianRaymondFilms not so bad if you pull the bolt on green covers corner so you can pull corner aside to make more room
@pruffin
@pruffin 11 ай бұрын
Thanks for demonstrating this. I'm convinced that I'd rather pay someone else to do it.
@befreebensondiy
@befreebensondiy 10 ай бұрын
That’s the great thing about KZfaq, you get to see what’s involved and decide. I had a spring break on my garage door. After watching a couple of videos I realized that it was better to call someone else. That much pressure in a spring loaded door was a little out of my comfort zone…. Thanks so much for watching!!!
@TheChadSmithPodcast
@TheChadSmithPodcast 2 ай бұрын
When I was a kid I helped my Uncle replace a spring on a garage door. It was the memorial day weekend family activity lol very scary and I definitely would rather someone else do it next time ​@@befreebensondiy
@hondaxl250k0
@hondaxl250k0 24 күн бұрын
@@pruffin I’m doing it now.. not so bad if you pull the bolt on green cover so you can pull corner aside to make more room
@Coolbreeze61
@Coolbreeze61 11 ай бұрын
Thanks for the video, one suggestion is to remount the fuel pump in a different location (like under the generator, so it won't get so hot) and you'll have better access in the future
@befreebensondiy
@befreebensondiy 10 ай бұрын
That is a great idea!!! If I have to replace it again I will definitely move it!!! Thanks for your suggestion and thanks so much for watching!!!
@Coolbreeze61
@Coolbreeze61 10 ай бұрын
@befreebensondiy did you throw the old pump away, the reason I ask is that the pump may not have been bad it may have been just vapor locking (even though I had a new pump on hand I didn't install it, I used the old pump and it seems to be working fine since I got it away from the heat)
@somchaiwongma3813
@somchaiwongma3813 9 ай бұрын
The hardest part seems to be to get the stupid box back in. So far I have spent over an hour and still haven’t figured it out. Unfortunately, in the video it seems like it takes about half a second.
@befreebensondiy
@befreebensondiy 9 ай бұрын
That's the funny thing about video... Sometimes you have to edit out a bad camera angle or things that make for boring segments. That stupid box was not easy to get in. It took some patience. It will go back in. I'm not sure the genius that figured it was a great idea to stuff a generator in a tight place and make it so hard to reach items that require service!!! Thank you so much for watching! I hope you get everything back together and working!!!
@mcoybigg6941
@mcoybigg6941 5 ай бұрын
👍🏼
@befreebensondiy
@befreebensondiy 5 ай бұрын
Thanks so much for watching!!!
@TheBuddyd
@TheBuddyd Жыл бұрын
This video has been very helpful and I am in the process of doing the same thing right now. Is it still running well for you after the new pump?
@befreebensondiy
@befreebensondiy Жыл бұрын
Yes!!! The fuel pump finally solved all of my problems. Thanks for your kind words, and thanks so much for watching
@_Pearls4Swine
@_Pearls4Swine Ай бұрын
Dumbest design ever. Bypass the notoriously crap Onan fuel pump and fuel filter with an after market 3-5psi 12v fuel pump mounted as close to the fuel source as possible and easily accessible along with a marine 10 micron water fuel filter separator. Depending on your ending fuel pressure best measured as close to the carb you may have to install a fuel pump with a higher operating pressure to to pull and push the fuel over the distance of the fuel line and through any fuel filter systems inline before the carb. Make sure the fuel pump is pushing fuel through the fuel filter system and not pulling. For me it is an auxiliary fuel tank that contains ethanol free gas, but you can also mount the new replacement pump (not additional booster pump) fuel pump anywhere near the tank. I also have a fuel "Y" installed so that I can pull gas from my 55 gallon main tank as well as the ethanol free auxiliary tank. Add a $20, 0-10psi fuel gauge just before the carb for most accurate low pressure reading always get as close to carb as you can. Whatever fuel pump you buy just make sure the fuel pressure is between 3-5 psi for Onan 4000 at the carb after pulling from any fuel tank and pushing through any fuel filter system you put in place. the final PSI at the carb is what is most important for the generators reliability and performance. Again, always keep the fuel pump as close to fuel tank as possible. It's less stress for the fuel pump to push fuel to a distance than to pull fuel from a distance.
@befreebensondiy
@befreebensondiy Ай бұрын
Thank-you so much! I wish I would have had this information before I tortured myself! I really appreciate this info. Hopefully, this will help others in the same boat and us in the future. Thanks so much for watching!
A SIMPLE Onan Generator Fuel Pump Test and Replacement Tips
11:44
RV with Tito DIY
Рет қаралды 452 М.
ЧУТЬ НЕ УТОНУЛ #shorts
00:27
Паша Осадчий
Рет қаралды 10 МЛН
Самый Молодой Актёр Без Оскара 😂
00:13
Глеб Рандалайнен
Рет қаралды 12 МЛН
Onan 4000 Starter Problem
15:14
Otto's Aero Escapades and What Not
Рет қаралды 7 М.
How To: Replace Your RV Generator Fuel Pump in Under 5 Minutes!
5:51
Lackeys Be Trippin'
Рет қаралды 9 М.
I make Free Water Pump no need electric power new style
17:37
King Homemade
Рет қаралды 703 М.
ONAN 5500 Fuel Pump Replacement - SP1
8:19
RV Travel Unraveled
Рет қаралды 12 М.
Cummins Generator QG 4000 Troubleshooting
15:45
Adventures In Your Own Garage
Рет қаралды 12 М.
Every car need this.#car #carhack #shortsyoutube
1:00
Chaudery Auto Traders
Рет қаралды 5 МЛН
казахи сделали мустанг🤯❗️
0:26
Профессор ПельменАрти💀
Рет қаралды 7 МЛН
Машина Жириновского.  #shorts Лиса рулит
0:52
Лиса рулит shorts
Рет қаралды 6 МЛН
ФЭТБАЙК vs MTB Что лучше ? #shorts
0:21
Леха МАК
Рет қаралды 1 МЛН