I am a single mother of 4 and thanks to your video and God's grace and strength I was able to replace my radiator myself and not have to pay someone 500+ dollars. So again thank you for posting this video

Got a price from my mechanic for $ 560.00 to replace my radiator. With the help of your video I was able to replace my radiator, cap and coolant for $ 160.00! Saved $ 400.00!! I am reasonably mechanical and it took me about 2 hours from start to finish. Made my week! Thanks for a great video.

As others have noted, it's easier if you just remove the top xmember (4 bolts) and if you pull the fans out (only takes a few seconds to unclip the electrical connector), you have more working room and don't even have to get under the vehicle to undo the lower hose. Thanks for the video, it was very helpful; took me a bit less than 90 mins start to finish.

10:06. Removing that crossmember ( the bar that the hood lock/latch assembly is connected to via around the center of it) would have made this soo much easier and it's easy to remove that crossmember out of the way.

So glad you made a great demonstration. I have to change out my radiator and now it makes it easier knowing which bolts to loose only. Thanks.

Thank you so much for the video, just replaced my radiator today! You were a huge help. Not only did I save money but I learned a ton and feel empowered. Such a great day. Will be looking to further my skills and knowledge. Pc and Lv

Thank you. I had the same problem exactly. Please continue to make how to videos.

Yeah, I think I can do this! That's what I needed to see to boost my confidence. The van is the same. You and I are like Bookends right down to the broken belt loop from pulling up our pants! Lol Seriously, I appreciate your work putting this out here for those of us who don't even qualify as a shade tree mechanic. The video really prepares me for the job. I've put in radiator "stopleak" several times so I'm going to flush out the system first. I'm hoping thar removes any of that silver or copper glitter that could stop up water jackets in the engine. I'm going to also replace the thermostat, radiator cap and overflow hose. I'll inspect the overflow tank as it sure seems to loose coolant there as well. Also, thanks to the comments of your viewers about removing the top support bracket.

Thanks! I did this today with the help of a friend. Spent about 2 hours and $192. Was quoted $850 by mechanic.

Thanks for the video. Appreciated the time saved by the fast-forwarding and the music was a nice touch too. Keep up the good work!

I think you did an outstanding job buddy thanks for taking time out of your radiator fix to help others! Much love from nc

Great video! Thank-you very much! Gonna start the radiator removal this afternoon!

Nice video but it is MUCH easier if you remove the bar that the hood latch bolts on to.

Great video. Showed me what I needed to know for our 2002 Dodge Van. Thanks

thanks for the video. I have to replace a radiator in a Dodge caravan next weekend.

If you replace your radiator, replace your hoses at the same time. All new is good.

good job very easy to follow, very nice knowing where all the bolts are before you start, thanks again

awesome video it helped me a lot,I was able to replace my radiator all by myself with this video,again thanks a lot.

Great video! For those of you doing this project, please use a bucket or oil pan to catch your coolant. It can be very hazardous to animals and humans.

Thanks for the video. This really help to explain how to do this job. You did a great job. Thank you.

Great video, it really helped me out in a tight spot. thanks again

Great video. Thank you. Tells me I need a mechanic and how important car knowledge is.

Thank you for your video i am a senior alone and i need to put a radiator on the same van you have i have a friend who is going to do the job we will use your video great help thanks

Great job on the replacement of the radiator..

Hey man thanks for posting this video, I’m getting ready to do this on mine and your video was helpful.

Awesome! Yes this video helps a lot. I just replaced the water pump and had to press in a new hose nipple on water pump housing. No fun, but I sprung a bad leak. wasn't water pump. Turned out to be a broken hose nipple. Im just thinking about replacing the radiator even tho it isn't leaking. I thought your van had transmission hoses attached to it? Im very glad it doesn't. Makes removal and install easier. KZfaq videos have saved me time and time again :D

I will be referencing this video. I have to change mine out on my 2004 dodge caravan.

Watched your video them went and did my radiator on 2003 caravan thank you very help full

Thank you for your video it really helped us out!

thank you for being informative

thank you, you made it very clear.

Thanks for the video..best one out there by far, really helped me a lot.

Hi you jolly man you did it. Nice keep it up. thanks for the demonstration.

Thanks for great vid and heads up what to expect. If all elese fails read the instructions (chuckle) Seems to be a popular repair for same exact reason/place. Complain to dodge. maybe a recall radiator is needed.(doubt it would happen) Our 01' caravan only has 92k mls is well maintained. I'd expect more.from it. shouldn't have to replace this part for such short mlg . Suggest buying some power/air tools for if you're going to continue doing extensive repairs. Good job!

Great Job Thanks to sharing !!! God bless !

Nice video bro. Thanks.

Thank you for sharing your video.

cool ma grea job you helped me bunches.. ill be doing this tomarrow

Great video thanks for sharing!

Thank you for your video !

Great how to. Thanks!

great video helped me replace mine

GOD bless u man. Good job

I have a 2007 Dodge Grand caravan sxt. This is a helpful professional video. But you forgot to mention when draining the fluid to make sure that there no dogs or cats around,bc that would be fatal.

I liked the video, and I do like it when you fast forward on the mundane... I would have liked to see if you could change the water pump easier if the radiator was out. 2. Why didn't you check to see if you had any leaks prior to installing the plastic. 3. Why didn't you burp the system first. Thanks.

Hola! Gracias por hacer el video, Muy educativo. Ahora después de hacerlo yo, pienso que si hubieras quitado la barra transversal entonces hubieras tenido suficiente espacio y no hubieras tenido que desarmar tanto.

Its a lot easier to take the upper radiator tie bar off (4 bolts) than taking all the support and latch mechanism off instead.

Awesome video, it will be my No 1 reference when I exchange my radiator. However, is there no way to catch the anti-freeze? To just let it go to the next sewer is a nightmare for environment, especcially if everyone does it.

very helpful im getting ready to replace mine but i wanna know why you didnt just take off the bumper? Wouldnt it be easier :) thank you and wish me luck guys itll be my first time lol

nice video great help

thanks for the vid!

Good video.

Thank you for this video! I have a Dodge Grand Caravan 3.3L 2007 with 180K km, and the coolant started to leak a bit, I have seen some small wet spots on on the asphalt the driver side in a summer sometimes under the radiator. I am just wondering if this a radiator? I purchased the coolant leak stop, but it did not help.I am just wondering if I should add another coolant leak stop fluid into the radiator or just replace one? Merry Christmas!

Thank you.

Thank you

next time take the cross bar off two bolts each side makes it a lot easier.

i changed the radiator in my 2002 grand caravan. and yes, take the 4 bolts out and remove the cross support bar. my biggest problem was getting the ac condenser pegs/pins in the mounts on the radiator with the rubber grommets in place. not a lot of room. ive got big hands so probably would have helped if i had smaller hands. probably took me about 3 hours total

Distilled water. Should have removed the red painted radiator support that traverses the entire compartment. It would have opened up the entire area and made it much easier. Good work even though.

Thank you for posting this video. Very helpful. Have to change one in an 05 caravan.

Благодарю за видео))

40 years mech . always replace the fans when you do the radiator on a caravan. they have the same life expectancy of the radiator and the hoses .

Where did you buy the new raditor? I have Dodge caravan 2005 se. Engine 2.4. Your raditor looks the same of my old raditor. I bought new one from oreillys, but it didnt fit. They said, someone might installed 3.8 engine raditor. I just want to a year and model of your minivan please. I am trying to find same as your raditor, but i could not find. Thanks

Thanks bro

I guess there's some radiator fluid in there... made me laugh because I think we all knew what was gonna happen before when you said you weren't gonna use the pan. SMH. However, great video I am in the middle of it so far and very informative. Thank you for posting.

Nice video however I agree with about removing that crossbar and not sure where you are from most states have a environmental laws against releasing anti freeze on the ground

You should consider including in your title that you're working on a 3.3L or V-6, or Grand Caravan. Lots of us looking for info on the 4-cyl with the 2.4L engine and it's very time consuming when this information is not included.

You mentioned that you have a transmission cooler. Or were you talking about the fans?

Leave your comments and questions here!

Good video, very helpful, and thanks for posting -- but the added music is extremely annoying.

How hard was it to remove ac and transmission stuff from front. Couldn't tell. I have 99 Dodge caravan. Gonna attempt this tomorrow

Will a 05 radiator caravan fit a dodge grand caravan 03?

? I have the same van as well but I'm trying to figure out what is the name of the part that the top hose clamps on to that connects to the engine. Because that part is leaking

thanks

THANKS

I noticed on my van that the over flow bottle tends to "over flow" from the spout quite a bit lately, my husband did just put water in the radiator, do you think he put too much?

Is there a bleeder value when you refill the radiator so the motor doesn't have oxygen in it and cause it to run hot?

LOL i would have played death metal during the fast forward moment.

Thanx, but next time take off that crossmember with the latch on - much easier.

'white smoke' indicates water is entering the combustion at some point, i.e. breached head gasket, cracked head or cracked block. or, you could be someohow burning brake fluid, did that on a Dodge van once, main seal on brake unit went out and it was sucking fluid into the intake of the engine.

good

My whole set up across the top of the radiator is completely different even how the fan shroud mounts to it

Good video, but you still need to bleed you system from air. Thanks

This music is fire

I haven't watch the whole video so maybe you address it later. Did you disengage the air bag sensor?

Is the radiator in the 2.4L 4-cylinder the same as in the 3.3L V6?

It's generally recommended that you remove the front bumper cover entirely.

thumbs up :)

3:45 I've got a completely different mounting bracket why is that if you look at the top of the radiator it's the mounting bracket attached to the crossmember

Use a zip tie on your return line

you really should have put a drain pan underneath to catch that anti-freeze

what size engine? I just bought a 2.4L 2001

Remove the 4 bolts from the support bar and it will come straight off without taking the hood release and all other bolts out, just becareful not to break hood release cable while moving it

You did a good job of explaining what you did, but let us see exactly what you were seeing. We watched you instead of the little details which could end in failure for most of us newbies. Specifically mating the radiator with the ac condenser. We watched you struggle, but we did not see why you were struggling.

Are you supposed to rinse the new radiator? Secondly did you use tap water or distilled water?

Do we guess what year and engine size you're working on???

no trans cooler lines!?

Subscribe just for the simple fact, it helps to bump it up!

Your radiator is leaking because of the shoddy way radiators are made nowadays. I' old enough to remember when they were made entirely out of copper and brazed together. These new units are made of aluminum and plastic and basically just clamped together.

good job...but would it have been easier to take the front grille first?

I was hoping to see you put the lower hose back on since you just let the coolant run out on the ground, lol! That was a bad move because it smells sweet and animals could be attracted to it and drink it and get very sick.