How to Replace the Starter on a 1999 Toyota Corolla

Рет қаралды 20,363

Күн бұрын

Easy to follow step-by-step guide on how to replace your old faulty or broken starter! If you have any questions, drop them in the comments below and I'll get back to you.
Tools Used:
-1/2in pipe (for leverage).
-3/8in ratchet.
-Two different lengths 3/8in extensions.
-14mm socket.
-12mm socket.
-1/4in ratchet.
-1/4in extension.
-10mm socket.
-10mm wrench.
-Door panel remover.
-Cup type oil filter wrench socket.
-Anti seize.
-Dielectric grease.
-Battery terminal cleaner.
Part Used:
-Starter (brand used: Denso part# 280-0270).
CLICK IN THE LINK TO BUY IT ON AMAZON: amzn.to/3vWnlX7
As always make sure you subscribe, give me the thumbs up, and share with your friends & family! thanks for watching, aloha!

Пікірлер: 33

@colepeltier8472 2 жыл бұрын

You're our hero Roy. It's literally the same car and color and everything. This video made it so easy.

@Pioneervalleydjs Жыл бұрын

That has to be the cleanest 99 ever! lol.

@anonymousanonymous-vq7dm Жыл бұрын

Man.....you work fast.....

@STLhumanity314 Жыл бұрын

😂 😂 😂 It's sped up, but I'm sure you already know that 😂

@anonymousanonymous-vq7dm Жыл бұрын

@@STLhumanity314 I know.....I was just joking.....thank you.....

@GregBrown-bu4ey Жыл бұрын

Roy thank you so much for the video! Just replaced my starter motor and benefitted from your awesome step by step guide! Thank you!!!

@austincarlisle1 6 ай бұрын

I just startwd the process to change it and your video helped me alot thank you man

@robertl1504 7 ай бұрын

That takes great patience. Thank you😊

@CanadianFX97 Жыл бұрын

Great video!

@mightymouse279 2 жыл бұрын

Thanks for the video, it came out so easy this way 💪

@RoysGarage808 2 жыл бұрын

Thanks for watching 🤙🏽🤙🏽🤙🏽

@chooseknowledge2859 2 жыл бұрын

Thanks man, you are a life-saver!

@RoysGarage808 2 жыл бұрын

thanks for watching!

@Mike-jn2hn Жыл бұрын

Mahalo for the video I'm currently in Maui . Starter just went out in Island Betty 99 corolla. Where you stay? Interested in doing this job braddah?

@andresrivera2348 3 жыл бұрын

Thanks excellent video and excellent explanation 💪🏼

@RoysGarage808 3 жыл бұрын

Thanks for watching 🤙🏽🤙🏽🤙🏽

@josevicencio6081 2 жыл бұрын

thanks for your help .

@ronaldaudrey4349 2 жыл бұрын

Good video

@16basman Жыл бұрын

Thank you!

@kgthegreatone943 Жыл бұрын

I did it in my driveway in less than 2 hours not that bad lol thanks for your help

@RoysGarage808 Жыл бұрын

Thanks for watching 🤙🏽🤙🏽🤙🏽

@screenmachine 8 ай бұрын

thank you

@garyhelgeland4493 2 жыл бұрын

Thank you

@RoysGarage808 2 жыл бұрын

Thanks for watching 🤙

@haynmax 3 жыл бұрын

Hi Roy I live on oahu and I have a 1999 Corolla as well. I plan on changing my lower control arms this weekend, do you have any tips on how I should tackle the drivers side control arm? I watched your video on changing the inner/ outer tie rods which I will also be changing. Thank you for making these videos, it is very helpful and easy to follow

@RoysGarage808 3 жыл бұрын

Mahalo for watching, I’m so happy to see a fellow local braddah watching my videos 🤙🏽🤙🏽🤙🏽 My best advice is to take it one bolt at a time and make absolutely sure that the axel doesn’t pull out of the inner CV joint or it’ll be one hell of a job to put back. Let me know how it goes, mahalo for the support!!!

@FredTheLutinoCocatiel 3 жыл бұрын

I am a DIY so that being said I would rebuild that starter and change the oil I do have a 1998 Toyota Corolla LE with 124000 miles PS it's-30 Fahrenheit today I'm not doing anything outside studying inside today thanks Roy

@RoysGarage808 3 жыл бұрын

I believe in you! But maybe do it on a warmer day! Thanks for always watching 🤙🏽🤙🏽🤙🏽

@FredTheLutinoCocatiel 3 жыл бұрын

@@RoysGarage808 thanks Roy stay safe