Kevin is that guy that every shop needs. Good, stable, hard working, nice guy.

I love it that you show everything and you’re not skipping. Your process for doing this is very impressive.❤❤❤

Never a dull moment when Kevin is in the shop 😁

Clinton and Kevin to the rescue having fun

THERE IS JUST NO END TO KEVIN'S TALENTS, AMAZING!!!!

Kevin welds like an expert. Just not a welding expert. I kid, I kid! That nut didn’t get pried off, so good enough.

You guys never cease to amaze me with your school of hard knox mechanical degrees. Another great video Clint ,alright Kevin did good too. Stay safe.

One more comment. Those needle scalers are one of the best top 10 inventions👍

It's the old VT logger again, LOl,if there was U-TUBE, 40 yrs ago, it would have saved me Thousands of DOLLARS!!!! !!!! I could have done a lot of these repairs myself, if I only had the know how! I hope the younger generation, appreciates the knowledge that you guys show in your videos!!! God bless you and your families, guys!!!

I don’t think I’ve seen an idler that worn out. You and Kevin make it look so easy. I think it is a great company to work for. Awesome company

At the beginning of the video when you had the camera on the front idler I was saying to myself it looks kinda wonky ....... Now we know why lol !!!

I’ve watched you do so much undercarriage work I bet I could pass the quiz lol

Journey Millwright here. Brush up on safety… don’t rig with chain and never work under a load like that track pulled back.

Kevin and you are unbeatable duo.

thank you for blowing my face off !! the view is much better !! 🤣

Greetings from Central NH Lakes Region - I am always amazed at how many uses a forklift can be put to - C&C's favorite tool. Today it was also a variable height work bench!

the best parts are the pro tips. years of hard knocks leads to knowledge that the viewer gets for free

If a young guy or gal wanted to be a mechanic in the field of heavy equipment repair all they have to do is watch your videos with you and Kev dog and your wealth of knowledge will give them a head start!

I like to power wash before putting it in the shop. Let it sit and dry and it’s all nice and clean.

Kevin sez...."That nut ain't going nowhere". He wants to weld the flapper on.

You guys are funny and so skilled. 💪 It was gonna be tough till it wasn't.

You guys really made that one look easy today.

yall work good together and enjoy working together

Worked on heavy equipment in the service. Enjoyed your video guys.Thx.

your free "boat anchor" - they actually make great stands for vices that you can then move about the workshop as you need them.

I would like to sign up for Kevin's next welding siminar. I have my own safety sqwints and crocks. 😄

Two professionals at work. Great video Clint.

Not only Kevin is your employee you can tell with the repor you have You two are great friends! Very much enjoyed the video Very much enjoyed the video.

Great video. Good job Kevin.Keep them coming.

Love watching this stuff...

Happy and safe labor day all!

That's a cute little dozer that's mommy size

Thanks Clint and Kevin, you are always entertaining, and educational.

I enjoy watching the interactions between you and the crew, keep them coming. I remember walking behind a dozer when it was plowing sand when I was a kid, the smell of diesel was great.

How could anyone run one that bad. Great job guys

You two are just main amazing and makes it easy to watch. Even when you are doing a a job of hard knox

I've always ran the flapper pointed back so tree limbs don't catch and have never had a problem with the exhaust blowing back since anything over an idle the exhaust is shooting up and any wind that is strong enough to blow it back I'm your face is going to dilute it and any wind that is strong enough to blow it back, it's not going to matter what direction the flapper is pointed

Once again done right or not at all. The banter on this site is always easy to take and prefer your style dealing with your staff to some other you tube dirt people. (Who will be nameless).

Thanks guys. Another great video.

Being you are talking how to videos a how to sesion on how to adjust the throttle linkage on a unimog would really be sweet. My unimog likes to keep running until I smother it.

Great job guys. You two made that look easy. I know it’s not but you made it look that way lol. Great video. Thanks for sharing!!

Great how to video Clinton keep them coming please

Good video, Kevin is worth his wages this week. Thank you.

yes another job well done boy that idler was well and truly shot good on ya all

nice 101 of how to there Clint and Kev! nice job and thanks for sharing and nice to see Randy out and about. We need to do a film short just with Randy to complete the shop crew

Great job !!! I have a 1964 td -20b Need to do sane things

Some fine welding there Kevin. Great work guys, fun video.

Great jobs guys. Thx forvthe video!

Some wrench'n, some weld'n and some banter. It's just the right mix for a great video guys. Safe travels bro

Super job as usual educational and fun thank you Kevin is the comedy in king go Kevin

Thanks for the tutorial on the idler and what to/ not to do on the care and maintenance of them. Ya gotcha bi-flapper and ya gotcha Kevin flapper, and they both work. Thanks for the ride along sir.

i wanna see that camper build done!!!!!!!!

You know what they say about welding, the bigger the gob, the better the job!

Hi from uk guys 👋 👍 hood job getting idler assemble out and changed👌 I wish my wallet had that much movement as old one you removed 🤣🤣 have a nice weekend, thanks for your time be safe and see you soon 👍 👋

Great video guys 🇺🇸

Very nice! Great job!

anti seize is not to be confused with the sun block! :)

Very Nice Job....Thank You...

Great video. I think I know why my track adjuster is collapsed now. I have a similar situation with the idler bearing gone and the idler wearing into the track adjuster. It won't hold grease. I keep learning more and more. Keep the videos coming.

Cool video Clint good old randy to the rescue again 😆 keep up the great work and videos 🤙👍👌😎✌️🇺🇲

Good job guys.

Like the video Clint and Kevin on the JD 550 dozer .

Lol do I see a weld strength test between Kevin and Clinton lol great video

Wow at 00:24 to 00:40 ish. Thats lived a hard life…

Another enjoyable video.

Clint and Kevin you guys work together so we’ll that’s part of being successful and teasing each other shows respect for each other. “Bi-Flapper “ was hilarious at least no body talked it into being a trans gender flapper. Clint your company would be a great company to work for keep up the great work guys.

guys, try using a shop vac instead of blowing the dirt all over the place.

Kevin anti-seize isn't sun screen. Lol God bless

I have a 650H here in north east Arkansas, great little dozer

Awesome video and 🛠️ wrenching on this big iron..great content and continued success with your channel and business 👍🇺🇸

Great job y’all

Good job maybe a power wash before bringing in to the shop would have made less of a mess?? Stay safe guys!!

I know this was a while ago but as you knew what you were doing then I would of thought a pressure wash before going into the workshop would be a good idea to keep things clean and free of dirt

I believe the Gentleman that owns that Dozer got Every Mile out of that front idler...LOL...LMAO....Those old Dozers are a great Machine...I operate a newer John Deere 850K, and I simply love operating these 850K..6 way blade.There a pushin Fools.and will climb a tree if you can get it to Stick...LOL..HAHA..Ive had these machines in places a CAT wont go...Great Job Guys on replacin the idler. And Video..Your helpers welding skills Hes ready for the Pipeline....(NOT)...LMAO....LOL..Just kiddin...LMAO..Hey it worked doesnt have to be Pretty as long as it holds..LOL

Been waiting ,,,,,Cheers! Here we go .. i feel like i'm part of the team!! lol .. !! :-)!!

Looks like you coulda used Uncle Randy's power wash-o rama..

Nice job guys. You sure made it look easy. Kevin's outstanding skills sure shined thru !!! I would be willing to bet he probably gives the same 30/30 guarantee that I give my customers, being self employed. 30 feet or 30 seconds from the shop. Whatever comes first !!!🤗🤗🤗👍 Keep those videos coming boys.

As always great video keepem coming!!!

good video. thanks

Great video. Looks not to bad to do but lots of weight

Awesome job

Nice work Clint & Kevin 👍 il bet you if you asked about the idler barring being like that il bet you they say it just happened 🤪

MM77 Approved 👍🏼👍🏼

Another AWESOME VIDEO !!!!!!

Great job men

Enjoy your work. Special K does an excellent job with the painting. Would like to see more of his prep work and painting skills if possible. You guys have a special working relationship. Is there anything to share in your backgrounds?

How come Kevin does all the work around there. Oh you da camera man!

If you machine the head down on two old bolts you can use them as aligning dowl

You didn't show taking the pin out.it's usually the worst part unless you have a pin press.oh, no pins,I'm old school.never had anything electronic on my dozers.n antisieze has to wear off cause it doesn't wipe right off.flappers face the operator so trees don't rip them off.you can't work the edge of a field or run one in the woods w/o having it face the driver.good job guys.your to hard on the kev man.lol

When running wrecker for a Mack dealer years ago, we were told to make sure the flapper was NOT open facing into the wind when towing the tractor back to the shop as the wind could cause the turbo to spool without lubrication (engine would be shut down) and possibly cause the turbo to seize. In your application I would say that this same situation could happen when the dozer is on the lowboy if the wind lifts the flapper. Therefore I'd say flapper facing sideways on the dozer so it would never be blown open while being transported, no matter which way the dozer was facing while loaded on the lowboy. Just an opinion from a 65 year old Diesel Doc. Thanks for another great video Clint!

thanks for an other great educational video 👍👍👌

I could prove you two wrong with those two sharpie marks. After watching this video and drinking my favorite wobbly pop. I looking at those two marks they would line up just nicely 😂😂😂. Nice work you guys!. Hey Clint it's nice to see that 9 min # is not alone. There's another number infront of it good job.😄

Well done boys

Alrighty then, very nice video on R & R on idler repair. What time is the “penetration station” live feed welding seminar…, I wanna make sure I have my glass of sweet ice tea, beef jerky, and comfy recliner, all set-up for an educational session. You folks have great long weekend. Thank you gentlemen.

Good video almost have all my on line training except welding under the cover of darkness has Keven drove Shorty the the truck

I would have thought you would take it to the wash area and spray down the area you work on. That would save.

Weld, I thought a mud dauber had been there. 😂😂

Well done again 👍

turn the flapper towards the back when it is being carried on the low loader the air will not keep spinning the turbo, allways load blade forwards

Nice job