How to Replace Valve Cover Gaskets 1996-2002 Toyota 4Runner

Рет қаралды 22,789

10 ай бұрын

Buy Now!
New Valve Cover Gasket Set from 1AAuto.com 1aau.to/ia/1AEGS00287
This video shows you how to install new valve cover gaskets from TRQ on your 1996-2002 Toyota 4Runner. Valve covers will begin to leak oil when the seals eventually break down. A new valve cover gasket set will make sure the oil stays inside the engine where it belongs!
This process should be similar on the following vehicles:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
Tools you will need:
• 10mm Wrench 1aau.to/oYz/1AXAA00010
• 12mm Wrench 1aau.to/oYz/1AXAA00010
• 14mm Flare Wrench
• 14mm Wrench 1aau.to/oYz/1AXAA00010
• 19mm Wrench 1aau.to/oYz/1AXAA00010
• 10mm Socket 1aau.to/obg7/1AXAA00017
• 12mm Socket 1aau.to/obBI/1AXAA00015
• 13mm Socket 1aau.to/obBI/1AXAA00015
• 14mm Socket 1aau.to/obBI/1AXAA00015
• 8mm Socket 1aau.to/obg7/1AXAA00017
• Air Blow Gun
• Air Compressor
• Coolant Funnel Set 1aau.to/ob4/1AXAA00116
• Trim Tool Set 1aau.to/oafL/1AXXX00006
• Hose Pliers
• Needle nose pliers 1aau.to/oEI/1AXAA00051
• Needle nose pliers 1aau.to/oEI/1AXAA00052
• Pliers
• Ratchet 1aau.to/obGo/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/obBI/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oaKo/1AXAA00044
• Brake Parts Cleaner
• Gloves 1aau.to/oah3/1AXSS00048
• Paper Towels 1aau.to/oD9/1AXSS00035
• RTV
• Safety Glasses 1aau.to/oaaV/1AXAA00343
• Drain Pan 1aau.to/oBd/1AXAA00320
• Hammer 1aau.to/oWi/1AXAA00091
• Pick 1aau.to/oRF/1AXAA00037
• Razor Blade / Gasket Scraper 1aau.to/ojK/1AXAA00280
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 21

@TRQ 9 ай бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@AngleHero 8 ай бұрын

Why would you drain coolant

@Axustr 8 ай бұрын

Great video, I was able to do this on my 98' very easily. However, I had a few minor differences in my engine with the throttle cables, and some of the hose lines. It was still pretty straightforward. Some things I had to figure out on my own: Hammering out the 3 seals in the valve cover I noticed that it left a ring still inside. The best way I was able to get the rest out was by flipping it over and wedging a flat head underneath it to pry it out. Another thing that I did that was my own fault was not tightening the valve cover from the inside out and over-torquing the bolts. This led me to cracking the cover and having to buy a new one. This was my First time working on my engine; if this is your first time, this video is great.

@MichaelSchmitz-mk8ll 20 күн бұрын

Thx for the parts numbers.... it really helped....

@WalkmanAssassin 9 ай бұрын

You are Saint TOYOTA 4 Runner Certified - thank you for this.

@thepitpatrol 7 ай бұрын

I am so thankful i live in the south.

@SyKoAsS3o3 8 ай бұрын

I can take everything off but no idea how to put it back correctly

@eugenepotts1581 8 ай бұрын

Is there a reason you only changed one side?? I’m about to attempt this endeavor this weekend on a ‘97 4Runner…

@Derek117100 Ай бұрын

Careful hammering in those seals. I tore through one of my new ones. 😅😢

@jimmoss9584 3 ай бұрын

Like My Cousin Vinny. Plug the manifold ports. God I hate this job. In the 1970s we used to use RTV Silicone over the gaskets to keep them from leaking.

@Back40Bushcraft 13 күн бұрын

Effin' amazing video.

@James-vi2bi 16 сағат бұрын

I see you didn't replace the half moons or the camshaft plugs. Any reason for that?

@jimmoss9584 3 ай бұрын

With MGA 1957 which leaked all the time, we would use RTV all over both sides of the valve cover gaskets as well as the oil pan. I have found it pretty impossable to keep the 1996 4Runner from leaking. I think I will try that here.

@jackhmason 3 ай бұрын

Very good job. I’m still daunted to dive so far in. I’ve started by tightening the valve cover bolts which did seem a little loose. Is that typical after 175K miles?

@jimmoss9584 3 ай бұрын

Great Video