How to Replace Wheel Bearing & Hub 00-04 Ford Focus

Рет қаралды 126,085

1A Auto: Repair Tips & Secrets Only Mechanics Know

5 жыл бұрын

Buy Now!
New Wheel Bearing & Hub Kit from 1AAuto.com 1aau.to/ia/1ASHF00091
In this video, 1A Auto shows you how to replace a damaged, worn, groaning, or vibrating front wheel bearing and hub. The video is applicable to the 00, 01, 02, 03, 04, Ford Focus.
🔧 List of tools used:
• Pry Bar 1aau.to/ogm/1AXAA00020
• 8mm Wrench 1aau.to/ocd/1AXAA00011
• 15mm Socket 1aau.to/oVm/1AXAA00015
• 16mm Socket 1aau.to/oVm/1AXAA00015
• 19mm Socket 1aau.to/opb/1AXAA00043
• 24mm Socket
• 32mm Socket 1aau.to/oN/1AAST00003
• 36mm Socket 1aau.to/os/1AAST00006
• Blowtorch
• Press
• Locking Pliers 1aau.to/oaX/1AXAA00139
• Snap Ring Pliers
• T50 Socket 1aau.to/oo9/1AXAA00008
• 1/2 Inch Breaker Bar 1aau.to/oja/1AXAA00078
• Ratchet 1aau.to/o9K/1AXAA00016
• Socket Extensions 1aau.to/oVm/1AXAA00015
• Torque Wrench 1aau.to/osP/1AXAA00044
• Anti-Seize Grease
• Brake Grease
• Rust Penetrant
• 7mm Allen Wrench 1aau.to/oap/1AXAA00007
• Floor Jack 1aau.to/oq3/1AXAA00068
• Hammer 1aau.to/ojv/1AXAA00091
• Jack Stands 1aau.to/orf/1AXAA00065
• Wire Brush 1aau.to/odN/1AXAA00079
For More Info visit us at 1aau.to/h/bJF/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 90

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@BILLHOVER 4 жыл бұрын

A tip to make life a bit easier, rap the new bearing in paper and then a in a poly bag and put in in the freezer for as long as you can as this shrinks the bearing, and once you have the bearing out clean the hub put the and then put it in some boiling water, when the hub id hot it expands remove it grease it and fit the bearing quick as a cold bearing will almost drop in, but be ready as the bearing will warm quick and return to it's normal size, it works both ways external bearings water proof bag and in boiling water and the hub in the freezer if it fits inside the bearing.

@brendanpierce668 4 жыл бұрын

Fun drinking game take a shot every time he says bonk 😂

@MotorsportPinto 3 жыл бұрын

2 shots everytime he says veericle....

@bmwbryan1 3 жыл бұрын

@@MotorsportPinto YOOOOOO hahaha you beat me to it 😄 🤣 😂

@rumple4skin140 2 жыл бұрын

Challenge accepted 😎 🍻

@regryan8044 Ай бұрын

Amazing video as always.. we need 1a auto in Australia

@stevemey3722 3 жыл бұрын

233 ft. Lbs for the axle nut "Chilton's manual"

@1AAuto 3 жыл бұрын

+Steve Mey Thanks for the tip! We'll pass this info along to our production team.

@nickgarcia1682 3 жыл бұрын

Thanks for that information 👍. That torque was left out of the video.

@joehyundaitech7961 4 жыл бұрын

Len I really enjoyed this video and I learned a lot thank you for the education and bar far the best do it yourself videos on youtube. the video quality is just amazing

@1AAuto 4 жыл бұрын

+JOE FORD DIY Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@MyGamingThumbs 4 жыл бұрын

This is the best guy to watch working on cars

@1AAuto 4 жыл бұрын

+Ryan Stroman Thanks for checking us out! 1AAuto.com

@yavuz0883 2 жыл бұрын

great explanation, you are the real master of this business, thanks

@earlclarke6042 5 жыл бұрын

I would've tried to use the old snap ring to see if it fits better your new one might be a little thicker

@shesprettytasty 4 жыл бұрын

What are the size blocks you are using when pressing out and in the bearing and hub? Wanting to do this to my Ford Focus also if you are pressing in a bearing and it splits does that mean you should take it all apart and order a new bearing?

@BigEightiesNewWave 3 жыл бұрын

I used an inexpensive one-man bleeder on my 1998 Jeep years ago , worked great. Just a hose with a one-way check ball on one end that you keep in a container filled with brake fluid. When you pump the pedal it prevents air/fluid from going back into caliper. Hey ! i STILL HAVE IT !

@MrSupernova111 2 жыл бұрын

Great detail here! I have the same press and just did my Accord's front wheel bearing. The only problem is that I forgot to install the snap ring back in. FML!

@jessechavez713 3 жыл бұрын

Great instructional video. How far do you press the hub into the bearing? From what I understand when you press the hub too far into the bearing the caliper bracket will bind to the rotor.

@Dinie09 3 жыл бұрын

I've completed one of these before, our 10ton jack wasn't enough with all the rust, had to take it into a local shop with their 40ton. Took about 15tons to get the bearing out.

@MrSupernova111 2 жыл бұрын

I have a 20 ton press like the one in the video. At one point I wasn't sure if it was going to work. But it all work out in the end. In the future, if I don't have a press I'm going to take the knuckle to the shop and have them do the pressing for about 1 hour of labor. 100% worth saving the headache. But if you don't mind taking the time to do it then a 20 ton press is the way to go.

@PeteBasel Жыл бұрын

Nice job and explaining everything along the way! Not an easy job!

@1AAuto Жыл бұрын

+Pete B Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@Huelogy 2 жыл бұрын

Do you have the take the knuckle out to replace the assembly? Other videos show them using a chisel to take the bearing assembly out without removing the knuckle? My car is 02 Civic

@358trucking 4 жыл бұрын

Awesome Video! You saved me a ton of time! Thank you! “32mm, it’s a big one” 👍👍🤣

@1AAuto 4 жыл бұрын

+358trucking Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

@joehyundaitech7961 4 жыл бұрын

love those lang snap ring pliers need to buy me a set of those

@1AAuto 4 жыл бұрын

+JOE FORD DIY Thanks for checking us out. 1aauto.com

@petarmalesev8349 3 жыл бұрын

Thank you! Very educative!

@1AAuto 3 жыл бұрын

+Petar Malesev Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@joehyundaitech7961 4 жыл бұрын

Len where can I get a couple of bleeder screw caps for my bleeder screws? I just had some brake lines re done on my focus and the bleeder screw broke on my left rear caliper this was told to me by the tech who did the job he was able to remove the broken one but the replacement screw he put on does not have a cap . he should have put one on

@gmail8144 4 жыл бұрын

Great vid

@MrRyand24 4 жыл бұрын

Love the Instruction!One thing LOSE the "Easy peasy" LOL!

@blascastro4576 2 жыл бұрын

I'm saying man he should stop that lmao. I been watching all the vids on the focus and I can confirm it is not easy peasy 🤣

@johnnywhite1681 2 жыл бұрын

Excellent and detailed instructions. Well lit and great view of the work being done. Fantastic video! Thank you.

@manuelflores7243 2 жыл бұрын

Thank you for your help

@vipertv6010 2 жыл бұрын

What is the torque for the wheel bearing nut how many lbs?

@rafael6688 4 жыл бұрын

How many tons is your shop press? Great videos by the way.

@joehyundaitech7961 4 жыл бұрын

hi len grate video I m getting ready to replace mine on my focus sonn. where did you get that ball pein hammer? I really like that one and want to buy the same one

@1AAuto 4 жыл бұрын

+JOE FORD DIY Thanks for watching! I do not have the model number for that hammer, but it can be found at pretty much any local hardware store. 1aauto.com

@joehyundaitech7961 4 жыл бұрын

ok can you tell me how many pounds it is?

@WorldRallyFamily 4 жыл бұрын

Bonk! Thanks for vid

@bobengelman1937 Жыл бұрын

Goood video, great information !

@bmwbryan1 3 жыл бұрын

He put the break in "beating the brakes off" this car

@justYouJesus1God 4 жыл бұрын

My mechanic took both sides apart, but he never did the steps you did. All he did was put grease on it, but never took the hub off or anything, it remained the same, it makes noise. And the breaks have air now, he never fixes the car the first time.

@josephherron7671 Жыл бұрын

Ever considered some grease to get those in?

@joehyundaitech7961 3 жыл бұрын

anti-seize spray just makes a big mess and it gets all over the wheel studs as well. use fluid film instead witch is made for this. but that's just me I have the same veh only its the wagon with the 2.3 also ford says whenever reusing the same hardware use a little blue lock tight on the threads but that's how we do it at the dealer

@jake8647 3 жыл бұрын

Bonks.... Hahaha I love it

@justYouJesus1God 4 жыл бұрын

Do you have any videos on how to put back a manual transmission on 1989 Honda Accord lxi, my mechanic took it apart and can't figure how to put it back, I am so sad, I had a running car and now its been a year since he messed it up, but I don't want to give up my car to the junk yard

@1AAuto 4 жыл бұрын

+justYouJesus1God We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com

@abcd-by6rw 4 жыл бұрын

Legend! Bonk bonk

@user-xn9dz3gv1m 3 ай бұрын

What direction goes in the hub first on the bearing

@devintolliver92 5 жыл бұрын

It's ok man your on video I understand. I would've wacked the hell out of it with a rubber mallet lol. Good job keep up the great work.

@1AAuto 5 жыл бұрын

Thanks for checking us out. 1aauto.com +Devin Tolliver

@justinrowe3480 2 ай бұрын

What is the part in the center called that is missing?

@EssexSilvering 3 жыл бұрын

Wheel bearings (front) on a Focus 2014 have been a complete nightmare for me. I ham pressing the old ones out just like this video of yours, then pressing the new ones in (even froze them for a better fit when pressing) ... Everything looks and feels fine but the moment I install this back on the car, I get the famous wheel wobble again .. It's beyond me what I am doing wrong as I am doing everything by the book! ... Help!

@buca9696 3 жыл бұрын

Your wheels might be warped. Hit any big pothole recently?

@markruge3785 2 жыл бұрын

2012 Hyundai Veloster front wheel assembly hub

@imitt12 4 жыл бұрын

Did no one else notice that the inner pad on that caliper was practically nonexistent?

@radekw708 3 жыл бұрын

There is also an abs sensor you have to remove, it sits right at the bearing

@MrSupernova111 2 жыл бұрын

The sensor is for the ABS and apparently this car doesn't have it.

@Gkitchens1 3 жыл бұрын

You Def want to out this exle nut all the way on flush with the end of the axle before hitting it. The axle nut has a metal casing around it that holds the washer on and it can get deformed and you can't get the socket back on the nut, or the washer can come lose from the back of the nut.

@antn8387 6 ай бұрын

I bought a hydra press just for this job.

@bobm7275 2 жыл бұрын

A1 video's have always been great an 8 or 9 but this one is a new low maybe a 2 or 3.

@BigEightiesNewWave 3 жыл бұрын

Wow cars there look like they were ocean-driven.

@walterramirez797 Жыл бұрын

El cable de caliper es muy corto tendrá problemas jirar la llanta

@islandbeaches395 3 жыл бұрын

20 ton press?

@robertmonsees2015 4 ай бұрын

Did anybody else hear him say how much to torque the axle nut

@MrRyand24 4 жыл бұрын

sound like randy couture "BONK BONK"

@asymptoticsingularity9281 4 жыл бұрын

Don't force it. Get a bigger hammer.

@justYouJesus1God 4 жыл бұрын

How much do mechanics charge to change a bearing or two so that I don't get ripped off?

@01jessamyn 4 жыл бұрын

I was quoted 500 dollars to change out the bearings on both front tires. I also live in Seattle. Expensive here.

@trevlouie 4 жыл бұрын

Depending on where you go. Dealership will be the most around $100-$115/hr 3rd party shops be around $70-$80/Hr Chances are be around $250-$450 but like I mentioned depending on where go for the work

@buca9696 3 жыл бұрын

Jesus. For that kind of cash you can buy the tools and do the job yourself.

@somap8380 3 жыл бұрын

The main thing you forgot to mention was axel nut foot pounds specs.

@1AAuto 3 жыл бұрын

+Soma P Thanks for the feedback! This will be 266 ft-lb, apologies for not including this!

@TheRoguelement Жыл бұрын

Hey Brutha without being rude you should have used a good quality penerant and allowed it time to sit that using your Air hammer with a pointed tip let the repeated vibration of the airhammer to "Wake up" your lock ring .... Heat only burns the seal up and sets the grease on fire ,, Dude .. come on brutha ?????

@stevemey3722 3 жыл бұрын

So, are you putting bad info out there so people mess stuff up, or do you just have bad sources for torque specs?

@SirKaleidoscopeSkies 3 жыл бұрын

This guy is bonking the steering knuckle with a sledge. Using a soft socket to press the bearing, heating the bearing which will make his job harder, HEATING THE KNUCKLE is also incorrect. take his ASE away; Im doubtful he has it Hes gonna get someone killed eventually. Don't do this. Let the penetrant work. Be patient.

@MrRyand24 4 жыл бұрын

LOL "Bonk"