Hello I just got back from installing my new headlights on my 07 Chrysler 300 Touring. Last week I tried to do it WITHOUT taking the bumper off. No Bueno couldn’t reach the bottom bolt to the headlight. So my bumper came off according to your video. I also bought a box of plastic clips , different sizes. I also figured if I was taking the bumper off I’ll just swap out the fog lights. New LED fog lights. Well 2hrs later the job is complete. What a difference & the front almost looks brand new. Can’t wait to try it out at night. Thanks for your video I studied it the last 2 days. Saved a lot of money on labor & I enjoy working on my car. Thanks again!

Thanks for video. FYI for anyone changing headlights on a 2009 Chrysler 300. I changed the headlights today and there are 3 (10mm) bolts behind the plastic wheel shield on both sides holding the front bumper cover in place. If you only have one bolt, then someone did a shoddy job and didn't replace the bolts. You do not have to remove the bumper cover from the car, you can just remove those 6-10mm bolts and pull the bumper cover forward and let it hang; you will have all the access needed to change the headlights. Also, you do not need to unplug the side markers if you do not remove the bumper cover from the car. Additionally, if you use the correct grommet tool (don't know exact name, but it looks like a 2 prong fork), you can remove and reuse those plastic clips at the top of the bumper cover under the hood (i.e right tool for the job). Those plastic clips at the wheels are one time use, so be prepared to buy new ones.

I took my lights without removing the bumper.. jus get a large screw driver wedge it in between the light n the bumber n you’ll see the screw.. get a long extension n 8mm socket n u can get it out wit no damage to the bumper.. faster n easier

Great video made it so much easier thanks mate

Thank you 🙏 so much for making this video.

Just what i needed thank you

Nice and simple👌

Great video 👍

Thanks for the help. Engineers who design things to make them harder to work on should be shot. Instead, they get promoted because the dealers can make a killing doing otherwise simple tasks. After fifteen years, I discovered the left assembly never had the bottom screw installed. It didn't line up just right so they skipped it. This car has 240k miles on it and the only major work done has been to replace the A/C compressor, and replace front suspension parts. The engine 3.5L engine is still strong, but I'm holding my breath regarding the transmission and rear end. No signs of issues yet, but they can't last forever.

Good job sir thank you

Thank you sir, used this video to install my new halo headlights !! Well done.

Thank you for this video. Really helped.

You can fix them. Some wet sanding then clear spray afterwards and mine look great.

If you dont wanna go through all that...buy a t27 star bit that is magnetic that goes on the ratchet and a long extension...and just push down on the top of the bump... and put the extension through and line up the star bit with the star bit bolt on the bottom... its way less work and time. Took me about 10 mins to do both.

Would like to see the bracket inside the bumper, where you take 10mm bolt out. I'm missing it on my 300

Didn’t need to remove bumper my lights look great now!

I hope changing the fog lights is much easier than that how would I go about that?

What is that stuff called on the old lights the foggy stuff?

Man that's a lot of work 😕 thanks you for sharing 🚙🚙🚙

Thanks

I have a 2004 Chrysler 300m Special and i see it's the same as mine. you gotta remove the front bumper just to replace a bulb .btw great video👍👍

Its possible to change whole front car to 2019 models.its maches??? Any body think about that?!

Great lesson just purchased a used 300 and the lights look terrible

Those clips on the wheel well have a little button in the middle that you lightly depress and it comes loose.

Thanks i gotta 06 3.5 ima replace mine

Thank you, I called the dealership & they want $650 to do this, I can do this

Thanks for the help. I am about replace my OEM HID headlights, and I was looking for a tutorial. My twin 2006 Heritage Edition 300c are both in need of new headlights, but other than that, they are in excellent condition. Do you recommend removing the front facia to access the fog lights for replacement?

👍🏼

I have a question so I have a 2006 Chrysler 300 and I want to buy some new LED headlights but they are usually 2008 300c / SRT so with that being said would those headlights fit in my 2006 300?

Junkyard has 2019 model. My ideas take 2006.2007 and change whole front part. Who know any info .thanks upfront.

I cant do this

Hey man help me I bought a 2006 Chrysler 300 see from bumper and put it on my regular Chrysler because I didn’t wanna lights I took it off A Chrysler C my question is would I be able to add Chrysler c headlights

My boi did all that work just to replace the bulbs 😂🤣 I did mines under 4mins

зачем менять фары, когда можно их отполировать

No adjustment is needed for these style headlights? My parents have a 300 LX, but I see lights for 300 C, but they look to be the same. Will these headlights work? Thanks...

Man I am having a hard time disconnecting my turn signal assembly

What a pain.... good design Chrysler lol those clips always break

Show the end results 😢

Esas madres salen de ladito sin tener que quitarle la defensa no mame

mAN, THAT WAS TOUGH!

Thanks for the video, wow what a pain in the a$$ just to change headlights, should be as simple as taking off headlight bolts that hold the headlights on then remove and replace. Thanks Chrysler,

Wouldn’t been easier to clean the headlights? I literally thought you were upgrading them to some special headlights that had angle eye or some fancy colour.