How to Reset Brake Pad Light on BMW E90 E91 E92 E93

Рет қаралды 85,512

3 жыл бұрын

After Changing your brake pads or even just after the inspection interval you will need to reset your cars brake pad light. This will be a small and Quick tutorial to help you out get rid of that light.
Tools and Products I used:
Nothing will be needed :)
Social Media Links:
Twitter:
► / sabertoothperf
Facebook:
► / sabertooth-performance...
Disclaimer:
Due to factors beyond the control of Sabertooth Performance, I cannot guarantee against improper use or unauthorized modifications of this information. Sabertooth Performance assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sabertooth Performance recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Sabertooth Performance, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sabertooth Performance.

Пікірлер: 46

@dannyjeffries9544 3 жыл бұрын

Brought a BMW and this symbol has been on it since as he said he changed brakes and it stayed on. It's been bugging me for about 2 months now, watched a few videos but couldn't find the solution so I watched your video and BOOOMMMM it's gone, cheers. Very happy BMW owner now !!!

@megalodononwheels 3 жыл бұрын

Hey man... That is fantastic news 🥳 super glad you got rid of it 😎 thanks for sharing it with me 🏅💯

@ronwheetley Ай бұрын

Thank you! Finally found one with the BC controller. Had to watch a couple of times. But finally got the light to reset. Of course this is after replacing everything on the front brakes. Thanks again!👍👍

@megalodononwheels 29 күн бұрын

Super glad you got it right and everything is working now 😎🥳

@costinrusu7914 3 жыл бұрын

Very helpful..thank you..sorted out now

@megalodononwheels 3 жыл бұрын

Glad i could help 👌💪 thanks for the Feedback

@killakam649 2 жыл бұрын

Dude it worked !!! I love you man ❤ Now to reset my dpf light?

@megalodononwheels 2 жыл бұрын

Glad i could help! 😎 And for the DPF you will need a diagnostic tool unfortunately :(

@donadam4761 Жыл бұрын

thank You. can you do a video on how to remove the footrest rest on a BMW 320i?

@megalodononwheels Жыл бұрын

Thank you 🥳 also unfortunately It was a "clients" (if I can call them that 🤣) car so It is not with mr Unfortunately :(... I won't be able to do it

@gilbertorocca1880 3 жыл бұрын

Nice one buddy! The best channel ever... I love cars 💪🏻

@megalodononwheels 3 жыл бұрын

Hey gilbi! Wow whatva suprise to see you here! Thank you so much for joining in ❤️🙏

@stephenkambwilimanda8878 2 жыл бұрын

Amazing! It worked!

@megalodononwheels 2 жыл бұрын

Got your back 😎💪

@Elias-London Жыл бұрын

Thank you mate 👍

@megalodononwheels Жыл бұрын

Glad i could help :)

@teeMr1 2 жыл бұрын

Worked well. Thanks mate!

@megalodononwheels 2 жыл бұрын

Glad i could help ☺️👌

@onlykhasix8200 3 жыл бұрын

good video bro, but mine light wont turn off, i did everything u said ij video but it wont turn off

@megalodononwheels 3 жыл бұрын

Thanks man, all i can think of is that your breaks are actually finished, it has a sensor connected in the break pad so if it gets triggered it will stay on the entire time until you change it, maybe just have a look and ensure you still have some breaks left... also if you did change the breaks recently, did you plug the cables in?

@midlls2369 Жыл бұрын

Brother.. i have same issue, and its pretty much same like yours, rear pads are orange color and front are yellow with lines, i did same like you, but nothing happened, could it might be a front sensor or what ? Thanks anyway 👍

@megalodononwheels Жыл бұрын

It might be a sensor... Also tell me did you look at your breaks? Are their life still good? Because if they sre finished the lights will not go off

@jeremyfine1464 5 ай бұрын

Pressing the button left of instrument cluster and Triangle light just blips on. The only items I get as options are Clock Set, Check Control & Oil. 2011 E90 328iX

@megalodononwheels 5 ай бұрын

Hi, unfortunately I haven't put a foot in a BMW since the day I recorded this video 💔 What I can reccomend is get your hands on a service/car book. Just look in there maybe there is a slightly different way it needs to be done.

@marekszkrybieniec4244 6 ай бұрын

Worked.... Yeah!!

@megalodononwheels 6 ай бұрын

Got your back 😎

@kuete1000 3 жыл бұрын

Tanks bro

@megalodononwheels 3 жыл бұрын

Glad i could help :)

@rolandbertici2609 2 жыл бұрын

Thank you!…

@megalodononwheels 2 жыл бұрын

Super glad i could help :)

@anthonymineo6781 2 жыл бұрын

Will the brake light being on cause the car to go into limp mode

@megalodononwheels 2 жыл бұрын

As far as i am aware, no it shouldn't

@mikebalaban3678 2 жыл бұрын

I did it for front braking pad the digital number went to ----------- and now I have rear and front same issue plus red light warning of car lifting picture any help ? e90 - 2011

@megalodononwheels 2 жыл бұрын

The lifting car means it is due for a service, it doesn't have anything to do with the Brakes... To reset it is also similar but i recommend to service it then reset it :)

@tuzpik95 Жыл бұрын

Hey, m8, mine have the same problem, front brake pads with lines, but when I reset them, it won't write the numbers, but there still appears the lines. Is it sensor problems? 🤔

@megalodononwheels Жыл бұрын

It could be that it is just one of the wires. Usually the sensor is inside the brake, when it gets to the sensor it should trigger the alarm. Maybe jt could be a faulty sensor in the brake but I highly doubt it. Is it the standard brakes from BMW or is it a "aftermarket" brake?

@tuzpik95 Жыл бұрын

@@megalodononwheels I solved the problem with sensor replacement. I tried to reset it, and then had problems with these -----. Replaced and it's done. BMW is very smart car, and she knows that nothing is replaced))

@megalodononwheels Жыл бұрын

Ahhhh dude that is super awesome! Clearly I got to your comment very late but glad you got it 😎💪

@brendacalderon9445 2 жыл бұрын

So if it doesnt reset and says -800 miles why I have all new rotors miles and sensors😭

@megalodononwheels 2 жыл бұрын

That is very weird, tell me the new brakes you installed, did they have the cable you plug in? Otherwise maybe along the way a cable is broken

@deonschoeman395 3 жыл бұрын

doesnt work mate, changed all the sensors as well. No reset

@megalodononwheels 3 жыл бұрын

Tell me Quick... Is your brakes still fine? Usually when the brakes are done the alarm will come on... And also just maybe have a look at the wiring, maybe use a multimeter and see if there is power going through the lines