How To Restart or Shutdown Your Synology NAS

Рет қаралды 50,556

Күн бұрын

Here are 2 quick ways you can restart and shutdown your Synology NAS and you can does these either via the web interface or using the power button.
Let's Shutdown Synology NAS via the web interface first.
Login to the web interface of your Synology NAS by either entering the hostname or IP address into a web browser followed by a colon and then the number 5000. In this example we called our Synology NAS 'DiskStationMega' and we use the port 5000 for the web interface.
Once logged in you'll see an 'options' icon at the top right of the screen. Click this and select 'Restart' or 'Shutdown' depending on your needs.
Click 'Yes' and the Synology NAS will start the shutdown or restart procedure which it uses to create a safe shutdown operation.
If you selected 'Restart' please wait a few minutes and you should hear a long beep when it's back up and running again.
You can also shutdown and restart synology nas in the same way but by using the button on the front.
Locate the power button on the Synology NAS and press and hold this until you hear a beep. The Synology NAS will then start the shutdown procedure and power off when done.
To start this up again simply press the power button once again and the Synology NAS will start to power up. It will also beep when it's booted up and is ready to use.
Please like and subscribe if you found this helpful and checkout our other videos on the Synology NAS.
00:00:00 - Intro
00:00:10 - Restart Synology NAS
00:00:50 - Restart / Shutdown Synology NAS Method 2

Пікірлер: 22

@SenileTomato 3 жыл бұрын

Great short and to the point video, thanks!

@da5603 3 жыл бұрын

very helpful! thanks. i hate long video's this quickly got to the point.

@adtoes 3 жыл бұрын

Preach.

@R2D2internet 2 жыл бұрын

Thanks! Just what I needed

@MikeEdwardsphotography 2 жыл бұрын

Super helpful! Thank you!

@Adya_uk 2 жыл бұрын

Excellent, was looking how to do this on dsm 7 web interface.. Thanks

@steel-r_ua 3 жыл бұрын

Thanks! Very helpful!!

@gordi555 3 жыл бұрын

You're welcome!

@TimSikma 2 жыл бұрын

What do you do when both those options do not work. I cannot connect to DS219Play and it does shutdown even after holding power button for a minute. I can hear HD's writing even though they should be idle and the HD's lights are flashing as well as the blue power button flashing.

@cloneddragon 2 жыл бұрын

Did this and my NAS hard cut the power when it beeped. Hopefully i didn’t loose any data.

@nuke7 4 ай бұрын

how do you have to keep the power button pressed? 2 minutes should be enough or more? 3 minutes pressing the power button did nothing in case of a ds218 play :(

@Lindhardgaming 2 жыл бұрын

can you set a timer on restart ?

@Djmeqa 3 жыл бұрын

Thanks i was pressing once the power button and nothing

@PrannoyChauhan 3 жыл бұрын

Is there a schedule option set a time for power on and power off

@gordi555 3 жыл бұрын

Yes, under Control Panel -> Hardware & Power -> Power Schedule

@patchs529 3 жыл бұрын

Is it okay to turn off your nas? I heard it was bad for it?

@gordi555 3 жыл бұрын

Yeah it's perfectly fine to power down and turn off your nas, just don't suddenly remove the power! Think shutdown instead of hard reset.

@eddyjawed4871 3 жыл бұрын

I'm very scard of those manual shutdowns

@gordi555 3 жыл бұрын

It's a button that starts a shutdown, it's not really a hard power off like a computer. Should be good :-)

@eddyjawed4871 3 жыл бұрын

Yes I discovered the other day, you wait for a beep then it flashes at you and shuts off. However other day it got stuck and wouldn’t do it so ai had to switch on pc and properly shutdown from the desktop gui.