How to Rewire Toyota Highlander JBL Harness for Android Stereo

How to Rewire Toyota Highlander JBL Harness for Android Stereo | Factory Amp.. No Sound Resolved

Рет қаралды 30,280

Жыл бұрын

How to fix 2001 - 2007 Toyota Highlander [First (1st) Generation] with factory JBL Amp with no sound, static or humming sound in an Android headunit.
** It is very important to use Metra 70-8113 harness or harness similar in pin-outs. Pin 16 must have the four RCA grounded to it.**
Support my channel, purchase directly from our online store eazidiy.square.site/s/shop
** Line Output Converter (Similar to Axxess AX-MLOC740) eazidiy.square.site/product/c...
Kindly use my affiliated links below for your purchase, it helps me with a little commission. Thank you!
** Metra 70-8113 JBL Harness amzn.to/3VW4GaP
** Axxess AX-MLOC740, 745, 780 amzn.to/3BzblQd
** Universal 16-pin Android Radio Harness for Toyota amzn.to/3hgSwdS
Resourceful links:
Wiring Diagram: drive.google.com/file/d/1-Mqc...
Toyota Pinout Guides: pinoutguide.com/Car-Stereo-To...

Пікірлер: 189

@danang843 6 ай бұрын

You are God sent brother. I followed your instruction one by one and it worked perfectly. on first attempt .No more humming annoying sound. Thank you, thank you, thank you.

@eazidiy 6 ай бұрын

You are welcome my brother. I appreciate your positive feedback

@Issaquah1963 Жыл бұрын

Thank you, I modified my installation with your modifications…works great 😊 02/17 2023

@eazidiy Жыл бұрын

Thank you for your positive feedback

@Tombomb1816 Жыл бұрын

You helped me out big time. Same issue, followed your schematic and it works! 👍

@eazidiy Жыл бұрын

Thank you for the positive feedback

@Phydous 6 күн бұрын

You are the BEST! I used your instructions on a 2003 Toyota Camry with JBL and (with only slight mods) it worked perfectly! Thank you SO MUCH!!!

@eazidiy 5 күн бұрын

I appreciate your positive feedback ✨️ Could you share your mod for Camry with me at eazidiy@gmail.com?

@cdreamworld Жыл бұрын

My dude! Thank you so much! Followed your diagram exact and everything works. Thank you thank you!

@eazidiy Жыл бұрын

You are very welcome! Thanks for the positive feedback 🙏🏾

@pawel3854 Жыл бұрын

Thank You ! this is what I was looking for

@eazidiy Жыл бұрын

You are welcome

@Slappa54Gaming Жыл бұрын

Man i will be trying this ASAP you may have been the biggest hero in my life . Will update you!

@eazidiy Жыл бұрын

Thank you for the positive feedback, Looking forward to your update. Do not hesitate to reach out if you need any assistance. Eazidiy@gmail.com

@Slappa54Gaming 3 ай бұрын

@@eazidiy Cant belive i let a year go by. Dude you are the Goat. Thank you so much for your video . Subscibed !

@eazidiy 3 ай бұрын

Excellent! Thank you providing a positive feedback. Thank you for the subscription 🙏🏾

@chriswood476 Жыл бұрын

Thanks bro I’m in the process of hooking up the same kind of stereo and I’m having the same problem with the background noise

@eazidiy Жыл бұрын

You are welcome and I hope the video will help 😊

@perspicator5779 11 ай бұрын

Fantastic dude!

@eazidiy 11 ай бұрын

Thanks

@MichaelMaxwell Жыл бұрын

I've been suffering with this issue for about 2 months and the Ali Express seller has ghosted me, you're the first person I've found to seem to have the answer to my issue. I ordered the Line Output Converter and JBL Harness from your link on this video. Am gonna be working on it this weekend, is it possible for you to send me a copy of wiring diagram you have in the video?

@eazidiy Жыл бұрын

Yes, send me an email eazidiy@gmail.com

@DJTJ13 11 ай бұрын

Thank you for this video it was super helpful!! So you didn't have to use the line output. You could have used the RCA's off of the head unit directly into the metra harness.

@eazidiy 11 ай бұрын

I could not because the pin out of the harness that came with headunit was wrong. Pin 3 and Pin 10 were missing.

@DJTJ13 11 ай бұрын

@@eazidiy you can because I am doing it right now. I de-pinned the android unit and pined it in the metra harness. I have a picture but not sure how to post it here.

@eazidiy 11 ай бұрын

@DJTJ13 Yes, I know how to de-pin, but I wanted to show the raw connection. Not all radio harness have that option. Thanks for your positive contribution 🙏🏾

@lolyheang168 Ай бұрын

@@DJTJ13can you share?

@andrewboneg499 Жыл бұрын

Very good bro.

@eazidiy Жыл бұрын

Thank you

@hamdansayedy5283 Жыл бұрын

Thank you for sharing this wonderful idea. By the way, can you share the wiring diagram since the previous owner of my vehicle has been modified already. Thank in advance.

@eazidiy Жыл бұрын

You can send me an email eazidiy@gmail.com and I will share it with you

@evgeniichirikov9886 Жыл бұрын

I tried this on my Camry 06 SE V6 with JBL amp. Even though this setup significantly reduces the background noise, unfortunately in my case some portion of the noise is still present. Before I used Pipeman's BC-NR12 noise suppressors (2 pieces) on my battery and amp on lines, it gave the same effect with removing most of the noise, but still not all the noise. I guess my stereo is bad or something, but pins of the android stereo match those on the video, only in a different order. Update: Actually I missed that it was possible to tune impedance with this device, now after I tuned it the noise is 99% gone, I can remove even 100% of the noise, but then the volume will be very low. I call it a success after so much frustration ! Thank you man, this is awesome ! Thanks for your advice in replies under this comment, I might try this too at some point.

@eazidiy Жыл бұрын

I understand your frustration when it comes to removing noise from JBL amp. You a ground loop noise. Along with the setup you have now, buy and add this device to it amzn.to/3N37oK1

@eazidiy Жыл бұрын

This PAC SNI-1 noise isolator. I have recommended it to people after converting high audio signal to low signal with LOC for JBL amp. It further removes noise.

@eazidiy Жыл бұрын

If you buy it, plug the RCAs from PAC to your LOC. Then plug RCA of Metra 70-8113 harness to PAC. Let me know if that helps

@evgeniichirikov9886 Жыл бұрын

@@eazidiy awesome advice, thank you so much and God bless you ! Please check my updated comment above, I think it's pretty much solved, but will keep this additional solution in mind. Do I need 2 of these devices for 4 RCA channels?

@eazidiy Жыл бұрын

Yes you need 2 of the PAC for 4 channel audio

@lrose3746 6 ай бұрын

I just subscribed. This is great. Is it plug and play if I have the base model 2005 Highlander with no factory amp?

@eazidiy 6 ай бұрын

Thank you for the positive feedback.

@garyschena5878 8 ай бұрын

Thank you for your help here. There's no reason an old car can't have a new radio! New life... I did follow all connections into the recommended harnesses and I did get rid of the audio noise but my volume is still sky high. Level one is way too loud. It seems the audio was not stepped down. Is it possible it needs to be more stepped down. Like 80%? I am about to give up and take it to a radio installer but would feel great to be able to accomplish this myself.

@eazidiy 8 ай бұрын

I am glad to hear the procedure was helpful to remove the whining noise. Unfortunately, I do not know why the gain of your Amplifier went up.

@jonathandahan1968 Жыл бұрын

I bought every single harness and adapter and nothing worked. This video solved the problem. Thank you so much. One thing, how did you wire the steering wheel controls?

@eazidiy Жыл бұрын

Thank you for your positive feedback. The steering wheel connector plugs directly into the car's female connector. It's a 20 pin connector with just 3 wires on it.

@jonathandahan1968 Жыл бұрын

Would you be able to make a video for that too? Thanks

@eazidiy Жыл бұрын

I have another video on how to install Android radio into Highlander on my channel. Please check for reference. Thanks

@dr.oforiboateng Жыл бұрын

I am also interested in how to connect the rear camera and my steering controls. Thank you very much.

@moisned4713 Жыл бұрын

Do you have a link to a harness for when the fuse is on the side? Thank you so much, this video is very helpful.

@eazidiy Жыл бұрын

www.ebay.com/itm/271205924291?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D250628%26meid%3D20ba92a5216b4150a68ea3cc41c3e6b1%26pid%3D101195%26rk%3D1%26rkt%3D12%26sd%3D283832957325%26itm%3D271205924291%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv11WebTrimmedV3MskuWithLambda85KnnRecallV1V4V6ItemNrtInQueryAndCassiniVisualRankerAndBertRecall%26brand%3DPioneer&_trksid=p2047675.c101195.m1851&amdata=cksum%3A27120592429120ba92a5216b4150a68ea3cc41c3e6b1%7Cenc%3AAQAIAAABQA2rugFlOq3qu1cLac%252F%252Fk6Vp0Oa0HaJIqoXKeIiOR%252BTUgsSvHaeyPxKYu6UqHqq7GaGyKVqHQnjeiiXcQpMGw2t3aB%252BssGfjtIWOBj8wExc7oYYP7xGMyQCrHDyDaSaWjB1CueI3A94n0yxXX5dx5gDczNrEoqgIZ4VXYyN3BpNkL3C%252BZb5onyuCefItMJbRfA4pAAT3LtlbaGWN6EaDju%252F3dg5H6QeIQiCsP04otUJi48XGJG946HvQ45EOJEsgOPK3QQByVHMQ5UzFyQJtMyeo2FWihLNyfXDFePK64GNzERbBOaFp3%252FYSAg7GFKnqXSZIW%252Fx9xstw6wBBeVMPXqLW5IqfcI8jEh2ZV33rYeBqW%252B3mCMd7WAYYlj5AUg3yswm8gNDk2519g0QyP30MezOskPh9FopgZswaTjVTMHnt%7Campid%3APL_CLK%7Cclp%3A2047675

@petersutyak Жыл бұрын

Hi will this work on my 2018 tacoma with jbl premium system. What I now is working except that when I try to use the sound in the rear only There is no sound. When I have it partially back to front it works pretty well. Also what are you using for other functions like steering wheel controls, phone, gps ,back up camera etc.? Thanks

@eazidiy Жыл бұрын

No! The radio pinouts are different. This is for older Toyota

@dr.oforiboateng Жыл бұрын

Will this wiring work for my 2002 Toyota Camry LE V6 vehicle with jbl original radio that I am trying to replace with same radio as yours but giving me the same noise over whatever is played on the radio.

@eazidiy Жыл бұрын

Hi it is very important to know the pinout of your harness for proper connection. Line output converter will remove the noise.

@JamesDaly-db7vm Жыл бұрын

Thanks!

@eazidiy Жыл бұрын

I appreciate the super chat! Thanks for supporting my channel.

@goudagrishhdoe8925 Жыл бұрын

What if my coverter is the same except it’s missing a shielded ground wire (brown). What do I connect the other shielded ground to? ( black/white)

@eazidiy Жыл бұрын

I strongly recommend Axxess AX-MLOC740 LOC with reference wire. There has been a lot of mixed reactions with people who used LOC different from Axxess.

@haashim335 Жыл бұрын

Great video! Would this work for a 2009 camry with jbl?

@eazidiy Жыл бұрын

The wiring diagram is for Highlander. You need to know the pinout for your camry harness before installing it

@jasonmaxwell2883 Ай бұрын

Great video. Thank you for posting. Am I correct that you did not use the can bus at all? Do your steering wheel controls work? Also, Pins 4 & 11 in the 16 pin android radio harness are marked SWC 1 & SWC 2 on your diagram. Are those connected to anything? Thanks again.

@eazidiy Ай бұрын

Yes the SWC works. Those pins connect to a 20 pin harness in the car to pick up the SWC signals from the radio.

@jasonmaxwell2883 Ай бұрын

@@eazidiy Thank you sir. I see where you left that connector on around the 3 minute mark in the video. It looks like those are pins 1 (gnd), 4 (SWC 1), and 11 (SWC 2) that go to the 20 pin plug.

@joshuawoods2364 Жыл бұрын

So no need for the can bud box setup anymore? Thanks in advance!

@eazidiy Жыл бұрын

Yes, line output converter works

@Pickle312 Жыл бұрын

I installed my system with harnesses the seller gave me and it all is working except all of the speakers in my car are treated as front speakers. So the fader function doesn’t work. If I put the fader to the rear I get no sound. Will this fix the issue?

@eazidiy Жыл бұрын

The harness the seller gave you has 2 RCA cables for audio? That is 2 channels ( front speakers only). You need to convert to 4 channels ( front and rear Speakers). The process will work for you as long it is 2001-2007 Highlander with JBL

@IdiesBlancNeige 6 ай бұрын

Hey. Thank you for the instructions! I've connected all wires - all works, but there's still some white noise for video playback from KZfaq and music. Will these two PAC SNI-1s help me? Should output from PAC SNI-1 go to LOC or metra?

@eazidiy 6 ай бұрын

Yes, you may try it. The output should go to Metra harness.

@IdiesBlancNeige 6 ай бұрын

Thank you,@@eazidiy. I'll try it. Both brown wires to the shielded ground, if I'm not wrong?

@IdiesBlancNeige 5 ай бұрын

@@eazidiy So, there is no result after connecting 2 PAC SNI-1. The exact same amount of white noise and interference as without them. Maybe I've missed something, or they are both defective, or the issue with the head unit - mine is a bit different from yours)

@eazidiy 5 ай бұрын

@IdiesBlancNeige Sorry to hear that you are still experiencing the same problem. Try this link kzfaq.info/get/bejne/iK-Kh712xJzDlZs.htmlsi=mt9qRsH_N6v1yhJW

@boblouis 9 ай бұрын

for the gain settings did you have to change anything?

@eazidiy 9 ай бұрын

No, I didn't not adjust the gain

@ilikespam23 11 ай бұрын

can this be applied towards a 2010 highlander limited?

@eazidiy 11 ай бұрын

No, the wiring for the 2nd generation highlander is different. You need to find the right wiring diagram for 2010 highlander. Use the link in the description box to check the wiring diagram for your specific car.

@philiprodriguez5545 6 ай бұрын

What and where did you get the 16 pin harness ? I would appreciate it

@eazidiy 6 ай бұрын

amzn.to/3hgSwdS

@josephtruong9217 3 ай бұрын

I struggle a lot too. The audio level from converter box was so low. On my bench, I feed to my home theater and sounds is loud enough. Well, I didn't do Amp on to converter box, but I do tied amp on to V-ACC at the metra similar harness. I'll try tomorrow with tying amp on of metra and converter box together...Hope it works. Thanks

@eazidiy 3 ай бұрын

I look forward to your update. Hopefully it work for you

@josephtruong9217 3 ай бұрын

@@eazidiy I got it to work finally thanks to your diagram. 1st problem was I couldn't get the JBL amp to turn on. I bought a cheap cable harness, about 10$, before I got your wiring for Metra connector. That connector doesn't have pin 3 - Amp on - and pin 16 - Signal Gnd. There're other unused wires on that connector, but I don't have tool to move them to pin 3 and pin 16, so I have to tap to the car wiring...that's undesirable. And I bought a signal converter which is defective? because amp -on produces only 2.8V, not 12V, so unable to turn on my highlander amp. So no sound. I bought AX4LC4M-150. What I did a bit different from the wiring provided is that I use Amp on from my Atoto S8 to power the AX4LC. That way, my Atoto turns on AX4LC which in turn turn on the JBL only after my Atoto is on. Thanks a lot. Your video and diagram is a great help!

@eazidiy 3 ай бұрын

I really appreciate your feedback. Hopefully, it helps others in similar situations

@ryanjohnson4488 7 ай бұрын

Do you know if this is the same as a 2007 sequoia? I can’t find any information on this

@eazidiy 7 ай бұрын

Unfortunately, I don't have any information on your specific car.

@ihopethiscommentisntabusiv4670 11 ай бұрын

Could you post your schematics online? Google docs or somewhere else as PDF or even a PNG? Thanks

@eazidiy 11 ай бұрын

drive.google.com/file/d/1-Mqcs2ftrSq9rb0u-WxbBlNgPbShmZXz/view?usp=sharing

@user-rv7yu2sd3d 8 ай бұрын

Will tyto -01 work instead of ax-miloc740?

@eazidiy 8 ай бұрын

I cannot confirm that, you may try it.

@Marx-ue9hn 8 ай бұрын

I did the re-wire and it works great, but now im not sure how to install the backup camera?

@eazidiy 8 ай бұрын

Watch my other video on full installation of radio and reserve camera for Toyota Highlander

@sangab62 Жыл бұрын

What about quality of sound? same as the original stereo?

@eazidiy Жыл бұрын

The sound came out amplified. Very good with no noise interference.

@dejavu0000 6 ай бұрын

Does this work for 2007 toyota camry?

@eazidiy 6 ай бұрын

This particular wiring is for 2001-2006 Highlander.

@14mtaylor 2 ай бұрын

I have the same exact issue. 2006 Tacoma with JBL stereo. Followed this video exactly and it still wont work. I get the screen working but no sound.

@eazidiy 2 ай бұрын

Hello, the steps in this video is for Toyota Highlander. You need to get wiring diagram for Tacoma

@dannilai 5 ай бұрын

Do you still need the canibus?

@eazidiy 5 ай бұрын

No, I do not!

@evang.hectorfuentes6184 Жыл бұрын

Thank you, you helped to remove the noise, thank you and you for the video, thank you

@eazidiy Жыл бұрын

I sincerely appreciate your positive feedback. It is my pleasure 🙏🏾

@Hiyocherrio 8 ай бұрын

Do your volume control on your steering wheel still work?

@eazidiy 8 ай бұрын

Yes. It still works

@Hiyocherrio 8 ай бұрын

Do you have a name/number of the exact stereo/unit you have?

@eazidiy 8 ай бұрын

@@Hiyocherrio Use this link to the radio I used in the video www.aliexpress.us/item/3256804167436734.html?spm=a2g0o.productlist.0.0.12cc6908b7aTTD&algo_pvid=9e69d0f3-1e6f-4e98-96cb-76d9557b805c&algo_exp_id=9e69d0f3-1e6f-4e98-96cb-76d9557b805c-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000028889558561%22%7D&pdp_npi=2%40dis%21USD%21187.94%2193.97%21%21%21%21%21%402103399116710307569547725e690f%2112000028889558561%21sea&curPageLogUid=IkeSWChpWjXt

@XAXMirzaX Жыл бұрын

Will this work on my 2007 Toyota Camry hybrid without navigation? I installed a android head unit and I’m not getting any audio

@eazidiy Жыл бұрын

It should work. Make sure you check if your radio had the 20 pin JBL harness.

@XAXMirzaX Жыл бұрын

My car has the JBL sound system so I’m assuming it has it correct?

@eazidiy Жыл бұрын

Just to be sure, the radio power harness has the 20 pin right?

@XAXMirzaX Жыл бұрын

My radio is 16pin

@eazidiy Жыл бұрын

The radio will be 16 pin, but is your old radio harness 16 pin as well? If the stock head radio is 16 pin that means this video won't work for you.

@user-ch4pc3qp8p 9 ай бұрын

Hi... anyone know what radio I should by that would work with these directions?

@eazidiy 9 ай бұрын

Any Android radio should work! Do you have Toyota Highlander?

@user-ch4pc3qp8p 9 ай бұрын

Yes. When I look online, I see a lot of the backs that don't have 16 pin configuration on the back of yours. I've seen a couple that do and they have the fuse on the side rather than the bottom. I have 02 with the JBL system. Sadly the existing radio is dead.

@user-ch4pc3qp8p 9 ай бұрын

So... seeing if anyone has a specific recommendation. It is a old car, but it still runs and it would be nice to have a decent working radio!

@eazidiy 9 ай бұрын

@user-ch4pc3qp8p Use the link in my description box to buy from Aliexpress

@user-ch4pc3qp8p 9 ай бұрын

Sorry to be so dense. I see links for your store, the loc, Metra Harness, Axxess, android harness, wiring diagram, pin out guides, but nothing to aliexpress. Again, sorry to be a dunce.

@mrttk5524 4 ай бұрын

What radio is this

@eazidiy 4 ай бұрын

Link is in the description box

@Hiyocherrio 6 ай бұрын

How did you connect the built in fan?

@eazidiy 6 ай бұрын

It has a harness to connect with the power accessory wire of the radio

@Hiyocherrio 6 ай бұрын

@@eazidiy so your saying it just plugs into the back of the unit? Mine plugs into the cable with all the rcas on it that Iam not using

@Hiyocherrio 6 ай бұрын

By the way thanks for the making this video . I followed your process and worked almost flawlessly.

@eazidiy 6 ай бұрын

Yes, that is where you will plug it. The fan produced some whining noise for me tho, I disconnected it.

@eazidiy 6 ай бұрын

@Hiyocherrio You are welcome

@Gabriel-cf2my Жыл бұрын

I bought an aftermarket car stereo (atoto s8 premium) and it looks like my highlander only has the 20 pin (cn701) for the factory stereo cable, and it doesn't have a negative wires for speakers?!? Can you help me?

@eazidiy Жыл бұрын

Yes, because your highlander has a JBL amp. You will need to buy line output converter and Metra harness 70-8113. and make connections with your android headunit.

@Gabriel-cf2my Жыл бұрын

@@eazidiy no, it doesn't have an amp, I think, since there was no indication on the factory car stereo, I could be wrong

@eazidiy Жыл бұрын

If you have a 20 pin harness in yout highlander, it means you have a Amp. Pin 10 is reference ground and Pin 20 is ground chasis. What year of Highlander is yours?

@Gabriel-cf2my Жыл бұрын

@@eazidiy it's 2001 highlander limited v6

@eazidiy Жыл бұрын

Limited has JBL amp. The highlander in the video is also limited.

@luispacheco349 5 ай бұрын

Back up camera works

@eazidiy 5 ай бұрын

I appreciate your feedback

@justinr6939 8 ай бұрын

Followed this and have no improvement in whine. The radio fuse is different than yours

@eazidiy 8 ай бұрын

I am sorry to hear that, what type of car is yours?

@Hiyocherrio 8 ай бұрын

What stereo unit do you have?

@eazidiy 8 ай бұрын

@@Hiyocherrio Use this link for the radio www.aliexpress.us/item/3256804167436734.html?spm=a2g0o.productlist.0.0.12cc6908b7aTTD&algo_pvid=9e69d0f3-1e6f-4e98-96cb-76d9557b805c&algo_exp_id=9e69d0f3-1e6f-4e98-96cb-76d9557b805c-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000028889558561%22%7D&pdp_npi=2%40dis%21USD%21187.94%2193.97%21%21%21%21%21%402103399116710307569547725e690f%2112000028889558561%21sea&curPageLogUid=IkeSWChpWjXt

@ddarsi Жыл бұрын

Hi brother, I have connected all the wires as you mentioned but I’m still not getting any audio sound. What would be the case here ? Appreciate your help on this matter. Thanks, Dilip

@eazidiy Жыл бұрын

Hi, what type car do you have? Can you send me a picture of your connections eazidiy@gmail.com. I will look into it for you

@madisreinpold393 6 ай бұрын

hello, Will this work with amplifier that has tx- tx+ connection between Original radio and amplifier? I tryd but bo sound. Toyota land cruiser 2006

@eazidiy 6 ай бұрын

The connections is for Highlander only. It won't work for land cruiser