How To Scrap Brass Door Knobs

Рет қаралды 15,900

Жыл бұрын

#howto #brass #scrapping
In this video I show how to take apart door knobs to recover the brass
Hi, my name is James and I love scrapping metal for money. I scrap it all, copper, brass, aluminum etc...
Come join me on my scrapping adventures where I share how I scrap items for easy money. I sometimes will go street scrapping or dumpster diving looking for scrap metal.
Please have a look at my scrapping videos and I hope I earn your subscription to my channel.
Thank you for stopping by and God bless y'all.
www.youtube.com/@scraprodrigu...
#scrap #scrapping #scrapper #junk #money #makingmoney

Пікірлер: 181

@scrapitall200 Ай бұрын

Thank you for watching!

@scraprodriguez Жыл бұрын

Thanks for the shout out bud. Great video too!

@scrapitall200 Жыл бұрын

You are welcome, my friend! Thank you!

@olajenkins3303 3 ай бұрын

I'm 86 years old God's will I'll turn 87 April 4. I've been doing some scrapping. I keep busy yes I'm a female. But I love doing it I need a wire stripping machine. But love your video number one you don't curse on it.i turn to one every other word is a curse word.so I don't like cursing.thanks for lot of things I've learned I'm from Burneyville okla.thank you.

@scrapitall200 3 ай бұрын

That’s so cool to hear. I truly believe scrapping is for everyone! I got the basic version of a stripmeister wire stripper from Amazon, it’s really affordable stripper and it’s been awesome! I don’t like cursing either, I’m happy you’ve found my channel.

@wannabescrapper72 Жыл бұрын

Yeah man. Rodriguez is top drawer.

@scrapitall200 Жыл бұрын

Absolutely 100%

@SilverScorpion Жыл бұрын

Really cool video. Never seen that done before! Thanks for sharing 👍

@scrapitall200 Жыл бұрын

Thank you very much! You’re welcome, I’m happy you liked it.

@frontyardfirewood Ай бұрын

Thank you brother, i got 3 boxes of old doorknobs some 10 years ago, never scrapped them til recently, your video is good help my man. Taking in the peeled brass and die cast alum right now, filled a 5 gal bucket, very time consuming but easy side hustle, i was smashing the parts with a sledge, will go to sawzall much easier my friend thank u

@scrapitall200 Ай бұрын

Oh that’s so great, I’m really happy my video was helpful. It’s definitely a great way to earn some extra cash.

@frontyardfirewood Ай бұрын

@@scrapitall200 yeah just not much weight for the amount of work, but it adds up

@scrapitall200 Ай бұрын

Yeah you’re right, but like you said, it does add up. They’re not my favorite thing to scrap, but I do them when things are slow.

@dalemills8052 Жыл бұрын

I've got several door knobs collected just for this purpose. All the tidbits add up over time. God bless you and thanks for this video.

@scrapitall200 Жыл бұрын

Yes, they all do add up. God bless you as well and thank you for watching.

@CopperEyeJoe 2 ай бұрын

Nice video. I have a bucket full of door knobs to scrap myself.

@scrapitall200 2 ай бұрын

Thank you buddy. They aren’t my favorite thing to scrap, but brass is brass lol.

@CopperEyeJoe 2 ай бұрын

@scrapitall200 that's right- scrap everything.

@scrapitall200 2 ай бұрын

@@CopperEyeJoe scrap it all lol.

@wannabescrapper72 Жыл бұрын

I have a few of these lying around. I guess I'll have a go at them some day. Thanks.

@scrapitall200 Жыл бұрын

You’re welcome! Thanks for watching

@scrapnjunk81 Жыл бұрын

Scrap Rodriguez is a hard working awesome guy

@scrapitall200 Жыл бұрын

He absolutely is!

@rosebarros2736 Жыл бұрын

Thanks for sharing

@scrapitall200 Жыл бұрын

You’re welcome and thank you for taking the time to watch!

@gulfcoastacrscrapper6523 Жыл бұрын

Nice Job

@scrapitall200 Жыл бұрын

Thank you!

@nicejunk666 Жыл бұрын

Scrap Rodriguez is awesome, great video btw

@scrapitall200 Жыл бұрын

Yes he is! Thank you, bud!

@terrycasey805 10 ай бұрын

Wow. You made that look so easy. Thank you.

@scrapitall200 10 ай бұрын

You are very welcome and thank you for watching.

@rickyscott9019 Жыл бұрын

Great video thanks to you and Amen

@scrapitall200 Жыл бұрын

Thank you so much! God bless you!

@andreduhaime9087 Жыл бұрын

GREAT video

@scrapitall200 Жыл бұрын

Thank you so very much, I appreciate that.

@SouthernScrapBucket Жыл бұрын

I haven't broken down a door handle that way before. May have to next time I get one.

@scrapitall200 Жыл бұрын

It definitely works better than prying and banging with a hammer.

@scrapnjunk81 Жыл бұрын

That was a great video. I learned a lot watching that. Thanks for sharing

@scrapitall200 Жыл бұрын

Thank you so much. That makes me very happy that you learned something.

@anthonycolangeli4133 10 ай бұрын

I enjoyed how you stripped the brass form the knobs. I had always wondered how it was done. God Bless!

@scrapitall200 10 ай бұрын

Awesome, I’m so glad you enjoyed it. God bless you too!

@jeffshutters236 6 ай бұрын

Great video because I just got quite a few of these. Thank you

@scrapitall200 6 ай бұрын

Awesome! Thank you and I’m happy my video will help you.

@ScrapMan69 Жыл бұрын

Great guy been subscribed to him for a long time great guy! Another great video 1st video I ever watch of someone scrapping door knobs that’s neat! That’s like a little micro scrapping session!

@scrapitall200 Жыл бұрын

Yes he is! Thank you, bud, I appreciate it!

@ScrapMan69 Жыл бұрын

@@scrapitall200 welcome my friend!

@bigcountryscrapper6885 Жыл бұрын

Another great video my friend

@scrapitall200 Жыл бұрын

Thank you, I appreciate it bud.

@deanmackley4520 Жыл бұрын

Another great video and very informative

@scrapitall200 Жыл бұрын

Thank you so much for watching another video and for all of your nice comments, I appreciate it.

@johnmanfredo422 5 ай бұрын

GOD BLESS BROTHER I ENJOYED THIS VIDEO MUCH.

@scrapitall200 5 ай бұрын

Thank you so much! God bless you too brother!

@scrappingonthefly77 Жыл бұрын

The pins are tumblers lol !!! Great video bro!!

@scrappingonthefly77 Жыл бұрын

Have you ever tore down the silver colored ones ? I've wondered if they're aluminum, brass or stainless ?

@scrapitall200 Жыл бұрын

Yeah sometimes words escape me. Thank you! Only ones that I’ve done that were silver color were stainless

@scrappingonthefly77 Жыл бұрын

@@scrapitall200 awesome! Glad I didn't toss them in breakage

@EdHensley-jx5jj Ай бұрын

There is a small lock on the side of knob, push in with a small screw driver and the knobs will pull off without the sawing no sawing needed.

@scrapitall200 Ай бұрын

That’s not on every door knob, most (in my experience) are crimped and have to be cut. I’ve found some like you mentioned and they are so easy.

@iffy9776 3 ай бұрын

I live in the UK, and I have never come across door handles with brass covering. The ones I get are all solid brass or solid stainless. The cheaper handles are solid aluminium. I normally just come across solid brass . I see many of the types you have in the American scrapping videos.

@scrapitall200 3 ай бұрын

Pretty much all modern ones are like this. Older ones will be solid brass or glass handles. Thank you for watching.

@Kreacher1974 3 ай бұрын

I bought that same scale and I love it. Thanks for telling me the model number.

@scrapitall200 3 ай бұрын

Awesome, I really like it, been great.

@maritimescrapper 9 ай бұрын

I just found a small bag full of these in the shop! Now I know how to diarm them lol. Great video!

@scrapitall200 9 ай бұрын

Hope it helps buddy. Thanks for watching

@JohnJoe-pf8of 8 ай бұрын

Useful information

@scrapitall200 8 ай бұрын

Thank you so much buddy

@JohnJoe-pf8of 7 ай бұрын

You are welcome

@MikeDoesStuff101 4 ай бұрын

I absolutely love your channel, and love learning new things, never use to break down my transformers, I do now with the hatchet method I seen on your channel! Thank you! Now to try the machete trick with the motors.

@scrapitall200 4 ай бұрын

That is so awesome! I’m happy you’ve been enjoying it and learning things to help you scrap. Thank you for your comment.

@BushDogScrapper Жыл бұрын

Scrap Rodriguez is a great member of the ScrapFamily and hustles that scrap that's for sure! Great way of scrapping doorknobs I have a bucket of mixed nobs around here somewhere! CheeRs ScrapItAll

@scrapitall200 Жыл бұрын

He’s top shelf! Thank you brother and I hope this video helps you with scrapping door knobs.

@BushDogScrapper Жыл бұрын

@@scrapitall200 I'll definitely be doing it this way for sure!

@scrapitall200 Жыл бұрын

Awesome!

@BushDogScrapper Жыл бұрын

@@scrapitall200 Have a great day and I hope the Scrap Run Fills your pockets with Scrap Cash! CheeRs

@billyboys2008 Жыл бұрын

Cracking video cheers keep up good work 👏

@Drewsroofingandhomerepair Жыл бұрын

Thank you friend. New sub

@paulcoenen7918 Жыл бұрын

Thanks, i had given up on those door knobs before because they are not worth the effort . Ill give this a try next time 👍

@scrapitall200 Жыл бұрын

You’re welcome. I’m happy my video has helped. Thank you for watching and leaving a comment, I appreciate it.

@damianmartindominguez7152 9 ай бұрын

Súper creo que de las pequeñas cosas se puede sacar mucho esa es mi filosofía ❤

@scrapitall200 9 ай бұрын

Absolutely, I completely agree!

@JohnJoe-pf8of Жыл бұрын

Nice channel

@scrapitall200 Жыл бұрын

Thank you so much

@JohnJoe-pf8of 8 ай бұрын

You're welcome

@JohnJoe-pf8of 8 ай бұрын

God bless

@MissCanadian Жыл бұрын

Came by to show my support nice video

@scrapitall200 Жыл бұрын

Thank you I really appreciate that!

@user-vn7rl3kt2o 5 ай бұрын

Good video

@scrapitall200 5 ай бұрын

Thank you, I appreciate it.

@user-vn7rl3kt2o 3 ай бұрын

@@scrapitall200you are welcome

@Drewsroofingandhomerepair Жыл бұрын

Great video. I have been throwing mine in shred. Not anymore

@scrapitall200 Жыл бұрын

Thank you and I’m happy you liked it. Thank you for watching and for subscribing. I returned the favor on your channel.

@roadhog1987 Жыл бұрын

Thank you now I need to get a vice

@scrapitall200 Жыл бұрын

You’re welcome! Hopefully it gave you some ideas.

@donnajohnson2604 Жыл бұрын

Canadian Treasure Hunter does them.

@scrapitall200 Жыл бұрын

He pretty much scraps everything like I do. I’m a big fan of his. Thank you for watching.

@nicejunk666 9 ай бұрын

I just rewatched this I was fighting with door handles all day now I know the cut them in half

@scrapitall200 9 ай бұрын

Thanks for rewatching buddy!

@jamespatterson8512 Жыл бұрын

When I do door knobs, I use my grinder with a cutter wheel and make a cut up each side and put a screwdriver in the crack and pry the brass off.

@scrapitall200 Жыл бұрын

I’ll have to give that a try, thank you!

@martinc591 11 ай бұрын

I love to get door handles. I stick them in the vice butt end down and cut them in half long ways with a band saw that way they just fall apart.

@scrapitall200 11 ай бұрын

Boy I wish I had a bandsaw. Thanks for watching and sharing your method with me.

@martinc591 11 ай бұрын

I install and repair commercial doors and hardware so I have to tools to do it with and they come in handy for scraping as well. Also, anything that is silver in color that comes off of a door, check with a file, you'd be surprised how much Chrome plated brass is out there!

@scrapitall200 11 ай бұрын

@@martinc591 sure is nice having the proper tools lol. absolutely, I always make a point to check with a file. Thank you!

@cuetTimmonz 11 ай бұрын

i use them to make handles. on my walking sticks. the older smaller ones!

@scrapitall200 11 ай бұрын

That is a great idea, thanks for sharing that. Thank you for watching.

@MrSubliminalStudios 5 ай бұрын

For getting that “c clip” off you can use a key pin gauge. You should look into getting a “rekey kit” and a set of picks/hooks. You can actually take apart the lock mechanisms almost entirely without having to cut any steel. I don’t know if you still scrap door hardware but once you have a good understanding of the forces at play you can take these things apart in about a minute and a half

@scrapitall200 5 ай бұрын

Awesome, thank you for the information. I still do scrap door hardware. Thank you for watching.

@stevearehart313 Жыл бұрын

You know that Reed vise brings around $300 in Nebraska!

@scrapitall200 Жыл бұрын

I did not know that! I really love it, it’s been such a great vise!

@npfd514 6 ай бұрын

Just a note....many times the lock cylinder that holds the brass pins, where the key goes into, is also brass....not aluminum. Do a scratch test to see if it looks like chrome.

@scrapitall200 6 ай бұрын

Thank you! I have found some to be brass, which is always nice lol.

@nachostuff Жыл бұрын

I turn them in as dirty ally or breakage. But I am also not getting 2.5 cents for shred. Happy Hunting,.

@scrapitall200 Жыл бұрын

Yeah my prices are a big reason I scrap everything, plus since it’s just a hobby to me, my time isn’t relevant to me but I understand for some it is! Thanks for watching buddy.

@FC-qe1wl Жыл бұрын

I breakdown just about everything to separate the metals...Its the only way to make money. Door knobs do take a little time but it is worth it. The way I see it, sitting home watching the TV isnt making you any money, but taking the time disassemble does...

@scrapitall200 Жыл бұрын

Absolutely agree 100% there’s money out there to be made and most of us could use extra money nowadays. Thank you for watching and for your comment.

@jeffmiller5071 9 ай бұрын

The vise and the hacksaw is the way to go. Takes seconds to cut in half.

@scrapitall200 9 ай бұрын

I have a bad neck that barks at me when I saw too much. Thank you for watching.

@karlbe8414 Жыл бұрын

I think what you calling cast aluminum is more accurately called die cast. Recently I got .45/lb. where as aluminum was going for .60/lb. it was my first time to collect that category. I think it has some Al in it, maybe Mg as well. Inexpensive fan motor housings, etc. The best chucks of Brass are in the latch button..sometimes. When you scrap 6 of the same thing at once, one gets more and more efficient. That was my experience with 6 or so handles a while back. Next time I get some, I will have forgotten the details...

@scrapitall200 Жыл бұрын

Yeah I have a bad habit of calling stuff like that cast aluminum because that’s what my yard pays me for them. Thanks for bringing that to my attention. Absolutely, I definitely have that experience with getter more efficient after the first few. Thank you for watching and for your comment. It’s appreciated!

@dr.a006 10 ай бұрын

My yard has a die cast (or zinc) category too. A little heavier/denser than cast aluminum. Prices for me pretty similar, but I try to separate the best I can or the yard will help. On different occasions I’ve even had the same types of security camera housings be called cast aluminum or die cast on different days😅🤷‍♂️

@al9929 Жыл бұрын

I recently got all the door hardware from a change out done in a 200+ unit apt bldg. I did the easy clean up for brass and took it in. The knobs similar to in this vid I kept pending scrap lessons like this video - thank you! The stuff that had least brass I took in. They paid me for brass bearing at close to same rate as zinc diecast.

@scrapitall200 Жыл бұрын

That’s great! Thank you for watching and sharing this comment, I appreciate hearing from y’all.

@othername1000 2 ай бұрын

I had always assumed the inside was zinc.

@scrapitall200 2 ай бұрын

My yard pays me cast aluminum for them

@brian56 Жыл бұрын

Pull the knobs off with an L shaped pry bar and hammer while it's in the vice. They slide off the steel piece with a few hits

@scrapitall200 Жыл бұрын

Thank you for watching, I’ll give that a try sometime.

@mikerichards6311 Жыл бұрын

👍🙏

@scrapitall200 Жыл бұрын

Thank you my friend.

@Bryan-is6ym Жыл бұрын

Take grinder after you vice and cut all the way around knob brass will fall off on outside

@scrapitall200 Жыл бұрын

Thanks for the tip and for watching.

@Mur-lock68 Жыл бұрын

New here Subscribed Stop by any time Headed over to Scrap Rodriguez!

@scrapitall200 Жыл бұрын

Thank you so much and I really do appreciate you going over to his channel, you rock!

@artstrology Жыл бұрын

That thar, is slicker en deer guts on a glass doorknob.

@scrapitall200 Жыл бұрын

😂😂 You win for the most creative comment!

@artstrology Жыл бұрын

@@scrapitall200 Can't wait to get the check.

@scrapitall200 Жыл бұрын

@@artstrology I’ll get right one that 😂

@woodworkingandepoxy643 4 ай бұрын

A lot of times the silver bit can be zinc instead of aluminum. Weight is a good way to tell. Being that little bit is almost half a pound im thinking its zinc

@scrapitall200 4 ай бұрын

It’s definitely zinc or a combination of zinc and aluminum but my yard just pays me cast aluminum so I’ve got into the habit of calling it cast lol Thank you

@woodworkingandepoxy643 4 ай бұрын

@@scrapitall200 gotcha! I didn't know if you knew or not. It's crazy how there's so much difference between so many scrap yards. You'd think by now they'd be uniform. I bet they sell it off as zinc though lol

@scrapitall200 4 ай бұрын

@@woodworkingandepoxy643 oh I’m sure they do lol. It is definitely crazy how different they operate. I do need to do a better job at saying what the metal is and not what my yard pays me for it. I do appreciate you pointing that out. Information is always valuable to me, so thanks again.

@woodworkingandepoxy643 4 ай бұрын

@@scrapitall200 anytime!

@moondog4313 Жыл бұрын

Just a suggestion wouldn't it be easier to cut the knob in half instead of trying to pull the metal out of the middle? Another suggestion is if you can keep them pins undamaged you can probably find a locksmith to give you a little more then scrap prices for them, another good suggestion is weigh the product before tearing it down get your weight and price price you would get for it then after break down get weight and price of each item

@scrapitall200 Жыл бұрын

I could cut it in half, the reason I don’t is it uses up more of the cutoff wheel which costs money (albeit not that much of a difference) and also I’ll lose more weight from cutting it and turning it into dust (again, not that much loss, but still loss) I guess it comes down to personal preference. Thank you for the suggestion, I do appreciate the feedback. I never thought about saving the pins aka tumblers to sell to a locksmith. I’ll look into that, thank you! I might start doing the price comparisons, my only thought is there’s a big difference in scrap prices depending on where other people live. Great suggestion and I absolutely appreciate it. Thank you for taking the time to leave your comment.

@moondog4313 Жыл бұрын

@@scrapitall200 some can calculate about what they would earn at their scrap yard, I myself like watching it in a video a rough estimate on about what you will make as is to what you can make separating it, on the cutting in half with grinder is just a suggestion especially when you got bulk

@scrapitall200 Жыл бұрын

@@moondog4313 yeah I can try and do that with some of my videos, it’s a good idea and I’m sure others will enjoy seeing the difference as well, thank you! As far as cutting the door knobs that way, I’m going to give it a try and I will let you know what I find out. Might even do a newer video and if I do I will make sure to credit you with the idea. Thanks again bud.

@pygmaelion Жыл бұрын

It's dangerous to go alone. Take this comment with you.

@scrapitall200 Жыл бұрын

Zelda reference?

@pygmaelion Жыл бұрын

@@scrapitall200 It is. But moreover, it counts as engagement. Good video. I appreciate you catching the brass pins in the tumbler, every gram counts!

@scrapitall200 Жыл бұрын

Thank you, I appreciate it very much. Thank you for watching the video and leaving a comment. Absolutely, it all adds up!

@dr.a006 10 ай бұрын

Begin quest music…..😂

@takealookatlifeinc.6274 20 күн бұрын

I just turn a 75 cent bucket into the 10$

@scrapitall200 20 күн бұрын

@@takealookatlifeinc.6274 that’s awesome! Scrapping door knobs?

@ScrappingwithGrandpa Жыл бұрын

I hate the long commercials at the beginning

@scrapitall200 Жыл бұрын

Me too! I’m trying to figure out the settings. Thank you for your comment

@gaildeckant267 Жыл бұрын

Ads are the price of admission.

@scrapitall200 Жыл бұрын

@@gaildeckant267 I watch quite of few different KZfaq creators and the ads don’t bother me, but I know for some people it can be a turn off. Now that my channel has been monetized I was able to turn on skippable ads which make a big difference for the viewer. Thank you for stopping by!

@jerrygriffiths6201 3 ай бұрын

been dismantling door handles 46 years , sick of the sight of them , if im bored i take them apart properly, if im in a hurry they get cut up in our 60 year old mecdev alligator shear !

@scrapitall200 3 ай бұрын

Wow, I think I’d be sick of them too lol. Alligator shears? That sounds epic lol. Thank you for watching.

@alanschlieper 11 ай бұрын

I have to ask the obvious question. Is this actually worth it? The amount of money you'd make from the microscrapping effort of tearing down down knobs cannot possibly be enough to pay for the time you'd spend doing it.

@scrapitall200 11 ай бұрын

I’m a hobby scrapper and I don’t count my time. But, I did make $4,000 last year doing what I do as a hobby.

@williammickle9077 8 ай бұрын

quarter pound of brass is about 50 cents. plus about 10 cents for cast and steel. is 60 cents. if you got rolling and did 10 in an hour you are making about 6 dollars per hour. thankyou for showing me that this upgrade is totally not worth doing.

@scrapitall200 8 ай бұрын

Glad to help. Thank you for watching.

@donkasper2182 9 ай бұрын

That's not cast aluminum its diecast.

@scrapitall200 9 ай бұрын

Yeah I know. My scrap yard pays me cast aluminum price for that and I got into the habit of calling it that. Thanks! I’ve gotten better at not calling it that anymore lol Thank you for watching.

@rossbrumby1957 11 ай бұрын

Most doorknobs are only brass coloured chrome unless you score the expensive models from posh homes. With these the only brass is in the keylock itself. A lot of fiddly work for what you're getting. I prefer electrical brass from old porcelain fuse holders- only have to unscrew them!

@scrapitall200 11 ай бұрын

Every door knob I’ve ever done is brass as you can see in this video. I’m a hobby scrapper and I do it because it’s really fun, the money is the cherry on top

@kennethbrown8723 Жыл бұрын

Good content, but you are too wordy! No need to spell every detail out!

@scrapitall200 Жыл бұрын

Thank you for watching and your feedback, I appreciate it. That’s just my nerves getting to me, I expect as I get more comfortable talking to a camera things will flow more smoothly.

@al9929 Жыл бұрын

I, for one, appreciated the detail as processing door knobs like this are new to me.

@scrapitall200 Жыл бұрын

@@al9929 thank you, I appreciate that.