If Fusion 360 was a toolbox, I've been using only one or two screwdrivers, and wire cutters for now. My hat's off for this great CAD tool and also the supporting tutorials!

Thank you Tanner for the great tutorial. The amount of brilliant video and tutorial resource online about F360 makes it one of the best CAD software to learn

Really love the video man, that last line killed me though "that's it guys, pretty simple process"

Awesome Tutorial Tanner keep them coming!

Awesome tutorial! It was really enjoyable to watch. Good job!

Awesome!

Extremely satisfying... I've been loving the sketching mode with my 3d printing! Thanks for the free software ♥️

Love the pacing of this video, usually these put me to sleep or make me need to skip/pause at spots, but this felt just right.

Great video that gets down to getting it done. Too many long winded videos out there so this was a good find with good info. Thanks Tanner.

I learnd a lot of things. Thank you very much for this Video.

Great video, Tanner. I agree with Sam, repair bodies was unknown to me. Thanks!

Hey Tanner, great video. The stars you see at some intersections are called "star points" and they're how t-splines deals with non-square geometry, FYI.

Loved the tutorial. Fusion360 seems to have some mind-blowing tools right there!

Yay! Several attempts and some funky looking shapes later I think I nailed it! Way out of comfort zone but confidence growing. Now will see if can do it again but without the coaching.

Fantastic Tanner Thank you

Thank you for the demo

Thank you !!- been through this tutorial about 30 times - and finally got there! I don't know if it is operator error on my behalf, but I get all sorts of strangeness and it has taken me all day to replicate this without some strange glitch that has caused me to have to start again and get more and more frustrated About to 3d print the part and will go through it a few more times from scratch tomorrow... till it sinks in and I can debug whatever I am doing wrong and try and get it right the first time Determined to get over the psychological barrier of this side of F360 that the parametric seemed easy to get through You make it look so easy!

dammm ! that's great stuff! I have been using fusion for a while now but only with sketches, I didn't even know it did this kind of thing ! Wonderful thank you for the great video, very informative and well explained.

Great tutorial . Nice pace and easy to follow

Great tutorial!!

Fusion 360 is very power :) Thanks, your videos are a great help! I use Fusion 360 for 3D printing of my models. Keep doing tutorial, I would like to see a video where you realize gadgets and mechanical models. Thank you so much for your help :)

Awesome!! Keep making more videos. Im definitely going to buy this software

Good stuff Tanner - the repair bodies was new to me, thanks!

Just got into this surface modeling tool and the auto repair is something i just discovered

Great video and an impressive result. Very well done!

Wow. That was really great.

What you've shown in these videos is amazing. Thank you! For this one in particular, how would you adjust clearances, in case you're making something for printing?

Excellent video!! Thank you!

Superb!

Just what I needed!!! Now I have to practice and try to do the same with my project!!! Wish me luck!!! :P

Really nice tutorial, got to the end of it feeling like I've learned a lot. Unfortunately for some weird reason, after extruding the projection, my Boundary Fill won't get green unless I create a whole solid body all around the "F".

Great video. Enjoyable and educational. Can't help thinking though you should find out what a rectangle is.

nicely done. Thanx!

Very good tutorial Thank you

Fusion 360 is indeed a software for new age designers.Especially the top down design approach which saves a tremendous amount of time when it comes to creating assemblies.

Wow fantastisch work!

If you are like me and having trouble connecting the triangles (spline gets kinda curly where they connect) when you 'repair body', just select multiple sides instead of rectangle in a face toolbox. It fixed the problem for me

You are a wizard!

Great video,

Me encantó. ✨😀

Nice work Tanner. Are you going to CNC machine this timber? Cheers Aaron.

Everything went well, but for some reason my boundary fill wouldn't work, so I had to do a work around... I'll keep looking for more videos to learn more!

Great video! How would you dimension this? I have not seen how to do that on any solid model tutorial so far. Your help would be greatly appreciated. Thanks

i cant get rid of fusion 360 now :/ i love it everyday more than the other great job

thanks a lot for the video! what confuses me a little about fusion is that it doesn't have layers and you managed to make the inverted L and the middle dash on the same layer and to create a unique mesh you have to do that. I tried to stitch the two bodies but an error message appeared. How did you do it? Just raising them on the same plane wasn't enough for me. Thanks

Thanks for the video and I learnt a few things. All went well except for when I came to the boundary fill. I got an error in red: "There was a problem combining geometry together. If attempting a Join/Cut/Intersect, try to ensure that the bodies have a clear overlap (problems can occur where faces and edges are nearly coincident)" Any help please? I am using the personal license. Thanks.

Mi primer intento salió bastante bien pero aun hay cosas que pulir muchas gracias por introducirme a las superficies de esta forma

that was fun but had problems at the last step, selected the outline and the F and plane but on select Cells i only have a box no green conture

19:50 'That fixed whatever was going on here.' :)

Enjoyed the video, but found it hard to keep up as lots of the tools used have now moved! I can't find "Patch" anywhere (I'm using 2.0.8412)...! :D Would love to see an updated version of this tutorial as it contains some very useful stuff.

Is it possible to add a "match" feature?It'll match body to the picture you put in it.It'll be interesting! In this case,if I can draw a triangle,extrude it to build a body,sweep it with a pattern,adjust it and get the result?

I'm new to Fusion360 and still trying to get around... I'm trying to design a guitar similar to a PRS style body that has both very organic shapes and aggressive arch-top contours at the cutaway but it changes throughout the length of the body, but also very precise cuts for pickups, neck and etc! Could you help? I know that thats is a complex project but it would probably be very helpful to explore all the capabilities... I have plans if it helps.... Thank you! Dan.

Nice video! Everything was fine until I was raising first two surfaces. The bottom right corner of the letter was coming up together with the surface I tried to pull up. Could someone help?? Thanks.

Great video that got me started on sculpting. I learnt a lot, but my Fusion 360 Logo is still kind of crooked...

Hi, thank you for the tutorial, I found it very useful. However, I am having issue with boundary fill. I read some previous comments and AKN for solutions but unable to find solve the issue.. It just won’t let me select the wall, the projected face, and the bottom plane with an error saying there was a problem combining geometry together. Any idea what could it be..?

I see that logo slightly differently than your interpretation: to me it looks like the top and crossbar of the F are wedges, tapering to a sharp edge on the right side. Is there a way to lift sculpted faces by different amounts, maybe raise them up to touch a sloping construction plane?

I honestly always thought this logo was based on a cubic shape. With the left portion, the one with the straight edge and the curved edge, was one face, and with the 'F' portion, the one with the two coplanar bits, with the top of the F turning down and forming a point, being another face, with an implied top face connecting between these two portions, with the interior of the F being sculpted out to the face opposite of the 'F' portion, which would imply thickness in two parts on the face opposite of the side face described, which would leave the bottom, which is only an edge formed by the bottom point of the 'F' portion and the bottom of the side face where, along with the back face missing portions, is missing due to the sculpting. Now this doesn't mean there isn't more curvature, as there clearly is, but I think this is the basis for what the logo is. A cube, with two side faces, a back face, a top face, and a front face, with sculpting cutting out all of the bottom face, some of the back face, and most of the face on the right side of the F and the front face of the F. A logo that can be modeled with traditional cad and sculpted in what's closer to 3D modelling, like what the video shows, is a great logo for showing what a program can do while being discrete and not being overly complex, plus it's minimalistic. Good job to whoever designed the logo.

What did he do at 14:54 to get the square faces back? I have deleted so many faces and started from scratch because I don't know how to do this!

It would have been nice if you had provided a link or resource for the logo file so that we could try this ourselves. Not everyone can just whip up a .svg version of your logo to play along.

Hey, why why did you use triangle to make curve and repair it instead of using splines?

on the 21:21 step I get the following error message "Error: There was a problem combining geometry together. If attempting a Join/Cut/Intersect, try to ensure that the bodies have a clear overlap (problems can occur where faces and edges are nearly coincident). " any clue what the problem is?

hey nice video ! i had a question regarding the repair bodies section. when the two starts appear and i go to repair bodies, it does not do anything, even tho the section has been selected. Any ideas ? cheers

I have little experience. But could it be more convenient to draw these lines by using stylus input or by using bezier pen (like in Illustrator)? And then convert it to 3d model.

After clicking the repair, the shape I created remains the same. I can still see boxy shape unlike yours became a curve surface. What did go wrong? Any ideas?

This is an excellent tutorial, however most of the time when I try it I cannot get the two main creases to merge. It locks up Fusion and I have to restart it. Am I doing something wrong, maybe I'm missing something obvious? Thanks, --Monte

Hi there. I can't create a boundary fill. I get this error: Error: There was a problem combining geometry together. If attempting a Join/Cut/Intersect, try to ensure that the bodies have a clear overlap (problems can occur where faces and edges are nearly coincident). I'm not sure what is happening, is it's all good up until then. My extrusion is 90mm deep,, and the depth that I lifted the faces by was (I think) 10mm. Should that be a greater lift? Any help recommended Cheers M.

i'm working on this trouble for 3 days... the matter is: i get repaired the first body, but the second doesn't take the rounded shape. i've tryed many times, also changing the order, but after teh first body it doesn't repair also the second. any tip?

why do i always get 3 separate faces whenever the repair body weld the triangle shape? kindly help pls?

Adding triangles did not work. I get T- Spline topology error when I click Finish Form. I narrow down to triangles at the bottom. Auto repair cannot solve. I solve by adding rectangles, then use Weld Vertices to convert into triangles. Works.

The result its very good but We are in 2019,Is there a faster form to do it, it takes soo much time.

I can't able to repair...after selecting and clicking on auto repair...it still looks boxy...instead of curved and smooth edge. Please help me..

Can we get a link to the image so we can follow along?

im having issues with the very bottom of the "F" at the point.. bot lines wont crease.. it crashes PC.. redid 5 times in a row and I even traced your exact topology for faces.. when i made it a triange at the point its fine but then if you try and merge those verts it crashes.. any ideas why that bottom point where the 2 creases meet would have issue?

damn dat some black magic to me

Hi will be possible to explain how to do jucy saliff please? thanks have a nice day

Nice tutorial, but Fusion just crashes when I try to crease the last Lines @16:30 Edit: I changed the sharp triangle you created at 7:30 to a rectangle and everything is fine now.

My Fusion 360 crashes at the particular step of adding a crease as you have done at 16:03 I cant seem to work around it.

Back here again re-learning

I'm following this, but as soon as I make the joining creases at the bottom right corner of the F where the creases terminate into one vertex, Fusion 360 crashes

Hi, this is modeled with T-Splines? excuse my ignorance :p

I cant find the "Repaire Body" option in my fusion version.

annoying but now is my second attempt and not just feeling the love :-( but it was a good tutorial Error: There was a problem combining geometry together. If attempting a Join/Cut/Intersect, try to ensure that the bodies have a clear overlap (problems can occur where faces and edges are nearly coincident).

when I try to repair body it stays boxy so I'm not sure what to do so fusion help me out, please.

Any demo video available

Hey guys do you have the link to the file for the Fusion 360 logo?

Can anyone tell me what surface feature replaced the patch command?

It crashes when creasing the edge of 16:00. It happens every time i try to do it, no matter how, has somebody any idea why this happens?

possible to make acoustic guitar neck?

could someone tell me where this functionality went in the current version of fusion?

Can you share the model ?

really shouldn't be making triangles, I don't think they work correctly, instead best practice would be to use polygons to simulate triangular faces and just sub divide. if you look at the final model, all the faces are polygon anyways after the auto repair.

this no longer works in fusion 360 I tried many ways you need to update this video.

I don't know why I can't extrude from the face under sculpt. I can select faces and pull them up.When I click OK, NOTHING HAPPENED.

every time i draw this the bottom edge will missing after repair body...

Огонь баба

I can do these on 3ds max in 3 mins and I don’t have to use reference

the fusion 360 crash 100times when i try to draw the exactly samething...annoying.

Quadrilateral, not rectangle.

can this be used for any letter?

triangle topology? I'm from the polygon world and it's a no-no.