Рет қаралды 7,563
When selecting the correct commercial door operator Consider the following:
- Operator type required ( Trolley or Side Mount)
- Motor Horsepower (1/3, 1/2, 3/4, 1hp etc. Always Refer To Manufacturers Recommendation)
- Voltage and Phase (Single Phase 115/230v or 3 Phase 208/230/460v)
- Usage/Cycles (Per Hour and Daily. Cycles Divided By Number of Months In Service Then Divided By ~30 And Divided By 24(hrs) To Get Hourly Usage.
Liftmaster Model(s) - H, J and T Up To 25 Cycles Per Hr and No More Than 80-90 Cycles Per Day - Available High Cycle Modification(s) Refer To A Knowledgeable Dealer Or Manufacturer.
Liftmaster Model(s) - GH and GT Up To 25 Cycles Per Hr and 90+ Cycles Per Day
Liftmaster Model APT 100+ Cycles Per Day, No Hourly Limit Specified
Liftmaster Model - HCTDCU Rated For Continuous Use, Factory Tested To 1 Million Plus Cycles.
Life Of A Properly Placed Commercial Door Operator In A High Traffic Application Is Roughly 10 Years On Average, This Can Be Shortened Due To Severe Traffic Demands and Environments As Well As Extended Due To Low Traffic and Ideal Environments. Door Condition and Maintenance Will Also Play A Part In The Overall Life Of The Operator.
First Class Garage Door - Chicagoland
www.fcgdoor.com/