That's the second time I've serviced my engine using this guide! You guys rock

i just got a discovery 2 td5 year 2000, 42,000 miles from new,basic motor i know but so easy to work on and solid as a rock, judging by most modern shite i think i got a bargain at £2600, yes its older and doesnt have an ipod plug but i can work on it ! great informative videos that made me go for an old motor.

I just changed all my filters with the help of this video. Fantastic job mate. I did have to get a translator mind you as I don't speak northern. :)

good video mate ..glad you drop things thought it was only butter fingers ..make my job easy for next service ..very clear .also agree with changing oil earlier many thanks

Oil filter just needs to be tightened by hand not over tighten

you guys are legends...

How a mechanic is suppose to be, knows his shit and is honest to the customer

Hi took my nissan navara for a free health check. Very friendly staff and free good advice we have booked it in for MOT and a service I hope your son likes is ice pops .

That’s not a lift pump , it’s a bulb primer. Lift pumps were on cars and lorries plant machines back in the day they worked off the camshaft and you could manually prime and see the fuel through a small glass dome...

What a place to put the oil filter , almost like it was an after thought .

K&N oil filters come with a 25mm nut fixed on top of the oil filter .Makes R&R much less complicated than with filter grab idea.They also make washable air filters. cheers love your work!!

nice and helpful video.last year i bought a navara. so i had the same difficulty with the oil filter replacement. thanks for the informations

Great vid mate👍 I changed my oil filter painfully from underneath the car, very dirty and hard to get to. ( and then a few weeks later I replaced the fuel filter 😂)

Master cylinder was not plugged back

Well done for this vid. I noticed the fuel filter on this one didn't have the water sensor underneath. Only criticism was I kept saying stop, stop, stop as you tightened the oil filter.

I've been changing the oil on my cars and trucks for 45 years never have I seen an oil filter on so damn tight before and installed so tightly, was curious because I'm thinking about buying a frontier

You are fantastic you tell the truth real mechanic 100%

Great video my friend. You put yourself in danger by not using a jackstand when you take off the wheel.

Im planning on buying a 2009 Nissan pathfinder. Now i know where to get my parts and get help if i run into problems! I live in Finland btw.

hey guys love the videos. just a quick hint, to ease the mess made by removing the oil filter I usually dump the oil in the sump first so the filter empties, then remove the filter.

good work guys keep it up

Just bought a Navara a couple weeks ago and definitely gunna use your video whilst I have a play haha! Good stuff boys! Up in Yorkshire at the end of the month maybe I might pop in for a nose ;) peace. ✌️

Thanks mate, very informative.

Your awesome man

Thanks for the video. Stupid location for the oil filter, my oil filter was tight, but not as bad as the one in the video!

Awesome thanks for the tips

Nice impact n thanks for using torch

Thanks a lot......very educational and helpful....best wishes.....

Hey mate, I love your videos, just wondering if you could make a video showing the sound of a good healthy d40 running so there’s a baseline to diagnose wrong sounding running. Thanks from Australia

THANK YOU

gracias x los sus comentarios

I suggest you add in the title, 2.5dci, most Pathfinder videos are US based and focus on the V6. I am UK based. A tip for others is to access the filter from below, this only entails removing the two rearmost shields. After which the oil filter can be reached from below - a much quicker and simpler way to do it. You can also apply just hand torque to tighten the new one. I was surprised at how much oil came out - approx 7.5lts. Good videos, thanks very much. I have had the dreaded dash light issue that relates to the gearbox switches, the autos have different switches to the ones you show (in another video) and requires the gearbox dropping to access them.

Ilike Navara kun doing well and the edge that brings me to watch me in Thailand

I have one... never imagined how much of a pain that was for something that needs to be done regularly.

Hi all love the videos very informative however my diesel filter has a wire connected to the base on my 08 R51 Pathfinder is this something aftermarket? Or a different filter to what you have in the UK

This video is dynamite! Thank you as I was struggling with the oil filter location & change. I need to carry out a coolant change and I can't vouch for the existing being Nissan supplied coolant. Should I do a full drain and flush with a can then replenish?

Hi mate thanks for the vid, do you possibly have a video or a detailed description where the engine temp sensor is on a d40 07 navara, I've found the loom cable as it was left undone by the previous owner but I've tried radius'ing the cable and can't seem to find it, cheers in advance bud

There may be a benefit of the upside down oil filter when you do a simple oil change the contaminated oil would drain out without needing to change it every time? any comments?

Great content! How long would it replace old alternator and belts ? Also put on new EGR . Which has already been removed . Getting a few mixed quotes. Keep up the great work.

I've an Automatic JAN2013 VSK and this video has been really helpful. I just bought an identical oil filter remover as result of seeing yours! I'm assuming this is VSK, Spanish Navara? I'm also assuming that oil+filter, check brake pads and visual checks as you've done is all that needs to be done every 12,000? What's the best grade oil to use for an auto? Thanks from Blue Mountains, Australia

can you do a video about servicing navara injectors. good job keep up the good work.

Hi could you do a vid on locating and replacing oxygen sensors? Thanks

thanks man

This is a top video. Can you help with confusion on what oil to buy please as the DPF confuses me. I have 9th/2012 navara d40 manual 4x4 spanish VKS 6 SPEED 2.5L. Would really appreciate clarification on weather mine has a DPF or not please?

hi buddy great videos I have a 2013 Nissan navara 2.5td.i have an engine leak on the right hand side of the engine above the engine mounting .can you give me advice as to what I should be looking for in order to repair it.

Wonderful video .May I ask Does the Manual Fuel Pump have a non-return Valve in it ? thank you

Can you do a video of how to do a service on a Nisan NP 300 Navarra

Changed the oil now have oil leaking out of the oil filter housing. By the way thanks for all your videos

Hey buddy, great video. Great to see someone adding videos for a particular make like you do. At the moment I've got a problem with my 2010 d40 Thai. It's done 135kms and had a timing chain replaceed at 125kms. Now it's stalling on start up, it's ok if I keep it above 1,000rpm and when it's warm I don't have a problem. Nissan are telling me it's the timing chain again. Thought it's not really noisy this time. Could stalling like this be something else? I've also noticed a fair bit of smoke, I installed a catch can but it hasn't really done anything. Would really appreciate some advice from an expert like yourself.. Thanks heaps!!

I've got a petrol Dx 2.4 1998 ute (Australia). I need those good quality parts, the triple chain, and those quality big end bearings (triple coated) you mentioned in a u tube. I have a little bit big end rattle at low revs, I didn't tension the caps properly, after replacing the bearings of an old overheated engine. I replaced the head gasket and had the head machined, it was OK. I would like to do the job properly this time. New high compression pistons and a proper hone (the barrels are very good) I honed them using a DIY device. Could you give me the specifics on the tensioning, price for all the parts and advice please?

If you encounter any blown head cylinder gasket will you make a tutorial how to do it please? Thank you i liked and subbed(:

Do you have a video about power steering when I’m parting I can hear the belt squealing and the steering wheel vibrates, I have checked the fluid level and it is ok I think the belt needs tightened but I don’t know how too

Will this effect a Nissan Juke nismo? Also could you tell me what I should look out for when looking st buy a Nissan Juke Nismo? Thanks

Not only the tyre lever is shit they supply but the jack. I learnt the hard way the jack the supply isnt tall enough to lift the truck high enough to remove the wheel

Hi mate cool videos! I have a nissan navara d40 2007 stx When i am going up hills it stalls easy and then will not start again it turns over then it cuts out again any idea what this could be? Or if i start it and then turn it off again it will not start?

Did you put the vacuum hose back on the master break cylinder¿?

im fascinating with the engine bay..and for the diy services...i think better let the expert do thier job..

Hi I have a d40 keeps stalling when cold turning in yard soon as I set off it fine till the next morning any ideas .Thanks

Love your videos, came across them doing my research on a d40 Navara I'm looking at buying. Any advice on what I should look for when doing an inspection before buying? It's an 07 stx auto and has done 215000km. Cheers from NZ

Hey Buddy. Do you have a branch in London or company you can recommend to have my Nissan checked up properly. Hard to travel up North to service a vehicle

Hope you reconnected the servo vacuum hose lol

The easy way to pull the engine cover off is to remove the front two bolts and lift it at an angle and oull it towards you, that will leave the rubber grommet on the bolts and much easier to install it back on !

thank you for showing the easy way to change that damn oil filter. the Nissan tecks need a good arse kicking for this design.

How much boost can a standard d40 yd25 handle I’ve brought one from the auction and it has a turbo upgrade and it’s running 30psi of boost as it also has a boost gauge is that reliable or way to much boost ? Cheers from Australia

First 10 second I thought u speaking Russian 🇷🇺

like your videos but did you just lift the car by the engine oil pan???

Can you make a video of D22 engine service?

Nice job forgetting to put back the hose to the break booster hahah

Oil filter seal can dislodge while screwing on..suggest place filter on engine if loose..can mean a new engine...and expensive oil everywhere..adding oil to seal is a seperate issue..

The ford rangers here if drained for more than 10 seconds it can have the varible speed oil pump rooted. on my d40 i will be installing a Racor pre filter and water trap to clean 98 percent before fuel enters factory 2 micron filter.

Could you add STP oil treatment with an oil change on an older Nissan

Hi Guys thabks for the great videos, please let me know if you have any videos for servicing a V9X aka 3.0l V6 Diesel aka STX 550 ? cheers from South Africa

I drop the drivers wheel off and wheel arch lining to change the oil filter

I changed the fuel filter but the bulb primer doesn't get hard. Is it possible that air is trapped somewhere in the system between filter and fuel pump despite running? Starting is fine, although get major power loss revving to 3800 rpm (no stalling, limp mode resets after switching off/on)... or could it be that fuel return valve mentioned in another video. 2009 D40 Euro5 81000km

Any chance of cruise control videos

On a 92 sentra 1.6 we changed the fuel filter and 1 injector and now it wont start, what do you think? Thanks

Hi is there a difference in the d40 yd25 to a d22 yd25 can the blocks be changed

Thanks for the content. Complete novice question here, how tight in NM did the oil filter go on? You had a hard time getting it off, but you also screwed it on there tight as F from what I saw. I was always told hand tight, what is that in NM? Can you explain in more detail please?

timing chain has been changed and all the cogs and drift key it ran then chucked it and came up with cam sensor fault

where can i buy a best turbocharger yd25 navara 2006? i relly need something that can last me how long do a navara turbocharger normaly last?

Oil filter replacement looks so painful. I can change a filter on W123 diesel in 2 minutes. Filter housing on top, secured by two nuts.

Bendix Australia recommends replacing brake pads at 3mm.

That is one of the most p.i.t.a filter location. That will do a little number on the hoses,clamps and clips for each and everytime we have to do all that to get the filter out. I was going to do it myself but I do not know about taking off all those hoses.

If the vehicle has been used off road, especially on a beach, sand and dirt can accumulate around the filter and fall in to the flange when removed. This must be cleaned with compressed air or pressure washer first

Is it normal Navara d40 2.5dci blow by on dipstick?

I notice this is the spanish built model the thai built model is slightly different

What is the oil capacity for a 2006 Spanish built D40

I will buy a navara 2013 model what you say ? It’s good car ?

what causes loss of power on on these things?

hi, we change the fuel pump complete and the accelerator pedal, we reset the ecu. it work fine for a few days then went into limp mode again. we did the manual fuel pump rest like you showed that didnt work. nissn navara vin# MNTVCUD40Z0602069 automatic

can i use other than cf4 oil on my yd25ddti

Ashamed to say that the first time I did an oil change on my Pathfinder I spent almost an hour looking for the filter.

And here I thought the American v6 frontiers had a horrible filter location.

Those oil filters are supposed to be spun on hand tight not tightened up with a ratchet it's no wonder there so difficult to undo. If you go to any of the major tyre replacement shops you will find them using impact guns to put wheels on and then check them with a torque wrench which is Crazy because they have already been overtightened usually by unskilled staff. I have just done a Kia's brakes which had only ever been serviced by Kia Bolton and had to use a 3/4 commercial drive socket and bar with a 5ft aluminium tube to undo the wheel nuts. If you own one of these vehicles I suggest you check your wheel nuts before you get a puncture on the motorway and can't get the wheel off. I spoke to Kia Bolton about this but denied ever over tightening the nuts but the evidence spoke for itself.

Do you think Nissan make the oil filter mountings especially difficult for folks at home. The ZD30 is the worst engine for an oil change that I have ever done. I reckon it must be a design brief. Even a Reliant Robin was easier. My Perkins/Volvo MD50 is so easy that I could do it wearing my best clothes and be sure of not getting dirty. Given that it sits in a tunnel in my boat I'm pleased that it is. I'm off to do battle with the fuel filter now. Well that was fun. Why didn't I think that pulling the water sensor out would release a load of diesel over me, the floor the battery etc. Next time!

How much does it cost for oil filter and diesel filter on their own please?

Why crank on the oil filter? Even the instructions say hand tighten.

I up me duck good job

Thanks for the video it's very helpful.I own a 2013 Nissan Navara it's been running very well, but lately when I first start it in the morning it start and it cut out than I have to crank it for a while and it will start and will be alright for the rest of the day.On the dash board it shows 4445 Could you please help me. Ray

Hi how much oil in total?