I've spent hours today trying to balance my overlocker, did it in literally 5mins with this vid! Thank you so much, I'll be recommending this video to everyone lol

This is the only video that makes doing the tension make sense. Genius.

This is THE MOST useful video I have Ever watched! I just wish you would MAKE MORE VIDEOS with helpful tips like this PLEASE. ..( I would like to know how to use the differential feed for sewing)

❤❤❤❤❤ What a genius way to actually see the difference as you change the tension dial. I’m like many others-don’t have a clue how to control tension. Think I’ll dust off my old serger, once I find it in the attic! 🥴Now I just need to invite you to my home and teach me how to thread it.😂

I can not believe I use to pay someone to do this for me!!!! Thank you SO MUCH

I put away my sewing in order to raise my precious granddaughter and now she is becoming a really fine adult. Now I get to return to sewing and your logical way of assessing the tension has taken away a lot of stress by a methodical method that also teaches you so much about the machines that we love to create on! Thank you!

I have always struggled with the tension and as a result haven’t used my serger machine. Thank you for this tutorial. So simple and straight forward. I’m actually looking forward to giving this a try.

One never gets too old to learn new tricks. Thank you for the simple way you showed us to set tension, my wife says at 80 I should know a lot, but then I have a LOT of hobbies. 👴🏼

This was the best video thank you. I could not get my machine adjust but now it is perfect. Thank you.

I've struggled with this for years. So logical and simple. Thank you for letting me enjoy sewing once again❤❤

Simple, Yet Absolutely Genius! At 48yo, I’m still a beginner, even though have owned my Serger for about 4 years. One of my first practice sessions ended with a threading nightmare. I couldn’t figure it out, got overwhelmed and felt so intimidated that I gave up, which isn’t like me. Alas, it’s been collecting dust since. Earlier I watched another video on how to thread my Janome 634D which actually led me to your video on Tension. Tension has always been an issue for me, even on my basic Brother sewing machine. I just realized that, until today, I didn’t fully comprehend what I was even looking for. Now, after watching your video many times, as I wanted to pause and zoom-in at each level to make sure I understood. I’m so excited to say, I finally get-it! Thank you for this wonderfully detailed explanation! I feel like I’ve overcame the anxiety that’s held me back. Thank you for helping me find my self-confidence & enthusiasm to try again. I’m actually smiling as I type because I feel so optimistic. I simply cannot thank you enough for this amazing video! You are one brilliant young lady!

I've watched this video 9 times and learnt something new each time. Thank you for the confidence in using my overlocker. Your video makes it so simple

Just what I needed to see today as my overlocker stitches are not forming right , thank you so much

Best video I’ve seen yet o KZfaq. Thank you.

Thank you so much! I am so glad to have this method which will save me a lot of time instead of trying to turn all the dials one by one randomly.

Ohh my life! this is the best video for adjusting your tension. Brilliant 🥰🥰🥰🥰🥰

Oh wow! As a beginner this really helped me. You are a really good teacher (coming from a teacher). 😬😬😬

A very systematic way to sort out tension on your overlocker😊👍 Great explanation, thank you!

Omg THANK YOU! Any tips of figuring out the differential feed and pressure foot pressure ? I’m serging 4way swim fabric and it’s curling and twirling 😭

This helped with my mother's new (2nd hand) sewing machine. I honestly just copied the numbers you used at the end and it was perfect!!! Thank you for your video!

Just found your channel and am very pleased to have such a logical method for tension adjustment. I have a babylock 6000 serger which is close to 30 yrs old. I had to give up sewing clothing for years, but I just retired and look forward to enjoying sewing skills that have brought me so much satisfaction over the prior years. Thanks for a clear and concise tutorial

Thank you so much for posting this!!! I sat here for the last hour trying to adjust the tension after buying my first serger 🤣 now I understand why my teacher always took forever to rethread and adjust the tension. This was the best explanation ever & now after 10 minutes I have it adjusted perfect, thank you again!!!

I never would’ve thought to do this🤦🏻‍♀️ thank you so much! This is genius🙌🏽

I have a Siruba overlock. There are no instructions in English anywhere. So I appreciate this so very much. My machine does not have numbers on the dial, but I will make a template. Thank you thank you thank you!

Wow love it. Great job of exhibiting a way to find your proper settings. Thank you ever so much you saved me hours!!!!!

Great tutorial on tension. I have had my overlocker for 6 years and have never changed the tensions. Now I'm off to give this a go. Thank you 👍

Wow! This is perfect. I have struggled with my machine for so long. The guides did not help because all the tensions were off. Your method helped be to set up my machine.

OMG!! I am sending you cyber hug and kiss. What a brilliant idea!! I am sat here with my jaw qide open. I had had my janome for a few years and I have never fgured out a way to get the threads right. This has truly blessed me. Thank you!!!

This is the best, clear explaination I found today. 60 yr old with new toy to combat tedious old school bias binding, french seams etc. Still prefer old school as it lasts longer, however kids clothes etc, I subscribed as thank you. Simple when taught well. 🥰

Thank you. After spending ages trying to fix tension, this solved it in minutes.

Awesome I have been sewing for several years but this is the best way I have ever seen for serger tension

That was a fantastic was to fully understand thread tension on Overlockers.. Thankyou so much, great job..👏

The only useful video on overlock tension I have seen. Thank you

Genius, Genius, Genius! Thank you, Thank You. It finally makes sense to me. This is gold!

That's a really great idea to make the numbered fabrics. Your Janome makes beautiful stitches.

Thank you for teaching me how adjust the tension, really made it easy.

So good !!! Just got back to sewing after some time & I was really struggling with threading & getting tensions right with my overlocker. What a clever method Genius!!

Thank you!! You have presented a clear and simple way to diagnose and set thread tension, I appreciate it!

Thank you so very much for showing us how to set the tensions on the overlock machine! This will save me hours of time!

This video is a life saver. Thank you VERY much for this tutorial.

Thank you so much! The instruction manuals are so vague but this video explains step by step! I’ve saved this and will keep coming back!

I love smart people!!! Thank you I was at stumped on how to fix my tension. 😘

This just safe my life I was on the point of giving up, I try to do sewing after twenty years and feels if I am so stupid, thanks a million for this video

This is fantastic I have been struggling with the instructions in the manual for a long time. I have a Janome My Lock and it's been pot luck getting the tensions right. I almost gave it away. Thank you so much xxxx🤗

This is going to be a video I refer back to again and again thank you so much for this it was easy to digest! I'm self taught and have such a tough time but people like you make this possible for me ! THANK YOU ! 😊

This was so helpful. I’ve had my serger for a long time but never used it much because I never knew how to set the tension correctly. Thank you very much. I know I will use my machine a lot now.

A.W.E.S.O.M.E tutorial, so easy to follow. Been struggling with my overlocker tensions for sometime. With this I got it sorted in a jiffy. Thank you, thank you, thank you for your awesome tutorial, LOVE IT !!!!😊😊😊👌👌👌👍👍👍

Thank you very much .I was struggling to get a proper stitch.this is very helpful and clear.

Thank you!! This was amazingly helpful. My Elna overlocker had totally different numbers but the tension is perfect 😃

This is the most clever, clear way to set stellar stitches. Thank you so much. Honestly, I have just randomly picked and prayed

I am a novice to overlooking or any sewing actually. I absolutely found your tutorial soooo very helpful, thank you so very much.

God bless you..I've been struggling till I came across your video...thanks alot ma'am

Thank you so much for this tutorial! I had been unsuccessfully trying to correct the tension on my Toyota machine for so long - your method worked perfectly!

Thank you so much for this video, I am struggling with my Janome 534D tension. Please tell me the 2 differential feed knobs on the side.....on what should it be?

Absolutely brilliant thank you. This is my task for tomorrow.

Wow, a simple solution to my problem! Exactly what I was looking for. Thanks!!

Thank you I have tried to get this right for 25 years. Now I can yippee. Regards Denise

Thank you very much, brilliant demonstration and very well explained will make setting up the Overlocker a lot quicker.

Absolutely genius! Thank you so much! Explains the different thread issues when too tight or too loose too! Just what i needed to see.. Thank you!

What a clever way of doing it thank you

have an older 3 thread serger and lost my manual. This is a very well put together and expained (both verbally and visually) tutorial. Thank you so very much for making tension adjustments so easy for each type fabric I sew with.

This is a brilliant system, and thanks for demonstrating it. I find the tension the hardest part to get right. I thought it would be the threading, as most people talk about that with dread, I'm fine with threading, but the tension, ooh dear different story! Should be better now :)

I have a white speedy lock 1600 and just threading it took me forever. My stiches are crazy but with your help I am good to go.

thank you..what a wonderfully simple method. Now I can use the overlock machine with a lot accuracy and a lot less guess work on the tensions. I have really struggled with them up till now

Thank you so much You solve all my problems I tried to do it so many time for years!!!🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰

Very helpful and very clear to understand. Thank you.

Wow, this is fantastic. Very logical. Thank you for showing us how. 😊😊

That is a marvelous technique. Thank you for sharing

After searching for hours! This is the best advice I’ve found thank you!

Thank you so much. I recently bought a second hand overlocker and it had no manual, I'll definitely try this.

Wow thank you so much, I've seen people check and turn their work but never actually knew what to look for 🌺

Oh wow thank u so much. I wud have never thought of something like this...thank u so much.

Thank you so much. Best explanation ever. I was going to go to the repair shop, you've saved me some money.

What a great tutorial, such a simple yet effective method. Thank you for sharing xx

such a brilliant idea. have adopted this. thank you SO much!! x

I'm brand new to the serger world, so you've got a new subscriber. Thank you for this valuable information!

Great demonstration! Thank you.

Thank you for this tutorial so easy to follow. I can now adjust my tension.

Can't believe this worked! Bless You!

Brilliant method - many thanks for this tutorial.

Best tutorial for testing tensor on server I have seen. Thank you so much!

OMG thank you so much for these tricks I’m just learning ❤

What a wonderful tutorial 👍

That was fantastic. So simple and logical. Thank you so much.

WOW! Genius! I don't have a Jenome but the prinipal worked for my machine - thank you so much! xx

Great demonstration and simple. Great idea to put to good use. Thank you for sharing.

Wow awesome thanks so much. I should know this 😆. This is an absolutely fantastic technique which I'll surely remember. Thanks dear for this.

How clever is that method !!!! I will sure try it. Thanks.

I'm good w my serger but your way of deciding the proper tension is brilliant. Thank you for teaching us. If I run into trouble I'll rem what you did. You have a nice style, a pleasant voice, good camera work, and useful information. Full marks! I'm subscribed.

Thank you so much!!! I just bought my first serger ever, it is a used one and didn't have a manual... your video is great and easy to understand 😊

In a word "CLEVER"!!! thank you!!!

Fantastically helpful. Thank you so much.

This is a fantastic idea thank you 🙏

Just the video I needed. So clever! Obrigado! Helped me a lot.🌺

Thank you for the tutorial, I have been looking for illustrations to see how to get it correct. You did a great job! Thanks again

This was an awesome tutorial! Thank you!

Brilliant - thank you for such a really good idea. 👏👏👏

Wow!!! Thank you for this great tutorial ❤️

Such an excellent video! Thank you!!!

I just got my first serger and have been so discouraged by setting the tension. I'm going to follow your instructions and finish my garment today. Thanks!