Janome 8002D Serger Overlock Lesson

Janome 8002D Serger Overlock Lesson - Basic Operations

Рет қаралды 19,136

3 жыл бұрын

Overview of basic operations on the Janome 8002D serger. The information in this video can also be applied to these other machine models, because of how similar the machines are:
Elna eXtend 264
Janome Magnolia 7034D
Janome MyLock 204D
If you have one of these machines, please note that your machine may have a different color scheme, and may include a different set of accessories.

Пікірлер: 18

@isayc2208 Жыл бұрын

Thank you very much for this tutorial 😊. I have this same model overlock machine for 2 years now, but I still don't know how to adjust the tension properly. I learned a lot from this tutorial. 💯 🙂

@MontavillaSewing Жыл бұрын

Glad I could help!

@Nictoriously 3 ай бұрын

I love you for this video ❤

@lindamarquis8701 Жыл бұрын

your instructions are amazing and so helpful. thank you!

@MontavillaSewing Жыл бұрын

Glad it was helpful!

@solangeherault7038 5 ай бұрын

Thank you so much it’s very helpful to me since I just started to use my serger and don’t know anything about it I’m trying to learn it so thanks again for your help ❤

@MontavillaSewing Ай бұрын

You can do it!

@ca147 Жыл бұрын

This was so helpful! Thank you!

@MontavillaSewing Жыл бұрын

You're so welcome!

@margaretdavies9250 11 ай бұрын

Thank you! So very helpful 😃

@MontavillaSewing 11 ай бұрын

Glad it was helpful!

@janealdridge5940 9 ай бұрын

Thank you- I managed it! Jane

@shelley22223 11 ай бұрын

Very helpful! Thanks.

@MontavillaSewing 11 ай бұрын

You're welcome!

@mariannanagy3672 4 ай бұрын

Thank you for the tutorial,I have a question please,are you using cotton thread's or both polyester and cotton?thank you

@MontavillaSewing 2 ай бұрын

I use Maxi-lock serger thread which is polyester.

@bjohnson0202 Жыл бұрын

How do you raise the pressure foot to get thicker fabric under it?

@MontavillaSewing Жыл бұрын

If you push up on the presser foot lever when it's fully raised you should get a little bit more lift, but I would caution putting too much fabric under this machine as it is more of an entry level serger and isn't designed for heavy duty applications.