Thank you Sir! This helped reassure me that I did everything correctly on the exact job. I had to replace the vvt sprocket so I put new timing chain kit at same time along with new water pump. 128,000 miles. Rattle at cold startup due to faulty vvt. You are a great mechanic and good at explaining. Bless you!

yeah this is the easy part. try taking the crank bolt off !!!!! or the cam actuator bolt off !!! make sure if you don't have an high impact gun you get yourself a honda crank tool to hold the pulley in place while you loosen this bolt. also get yourself a 2ft 1/2 extension with a 2 ft 1/2 breaker bar and hopefully maybe!! you might be able to loosen this nut !! I had to actually slip a solid steel bar over the breaker bar so there wasn't so much flex on the breaker bar and finally it came loose with a loud pop!! as for loosen the cam actuator bolt. grab yourself a 24mm long wrench to hold the cam while you use your breaker bar to loosen this nut. if you have a partner around I highly recommend they help you with this. if your car has a sway bar you can rest the wrench against it. don't even attempt this job if you don't have any of these tools or you will find yourself in a pickle without a car trying to go out and get the right parts for the job like I did !!!

Thank you, now I can install the timing in full confidence

Ive watched many of your videos, and everything was explained very well . That tells me that you know what your doing , experience is the key factor here .

Great video. Enough details

Just bought a Honda Accord 2006 $700 with diagnostic that engine was bad come to find out it was the timing chain the video was very helpful

Well explained, very professional

Thank you for sharing! Having this job today.

👍👍 quick, simple explanation, and great video shots!!!

Dude you explain it like I have no idea. Thanks anyway.

Great video! Thank you so much!

Fantastic video, thank you for the great explanation! Need to check timing problem on my 2006 CRV and I think it will be the same.

You can also lock the cams in place there is a hole on the rear end of the cams a small drill bit will work it slides through the holes into the bearing cap

Great tutorial. 👍

Good video bro THANKS for sharing

Very educational. Thank you.

Great video, now I feel confident in doing my own timing chain..

Great Job!! Thanks for sharing!!

Your video is the best thank you verry much what are the simptoms when the tensor is not good

Perfect video. Only one question: how did you hold the camshafts in position or prevent their or exhaust shaft alone from inadvertent rotation?

Nice video, but what about the lower chain, does that not have any marks or is it just an oil pump?

Did you change any the sprockets or just the chain and tensioner. Or?

thanks man good video

Very good video ! Thanks,

Do you have to drain the motor oil and antifreeze? And remove the oil pan?

Very explained thank you

Thanks for the video, I wanted to know if in these engines the piston bends valves if the timing chain breaks? Thanks for answering.

Hi I bought a car recently it has the Same problem. Can I send you video for clarification?

thanks so miuch merry Christmas

Thank you for the video look so easy lol

Legend Thank you, do you have a formula on how to remove crank bolt w without honda crank 50mm tool

Good job 👍🏽, can this work also for 2007 2.4 accord? I don’t see that many vid of my year vehicle 🚗 I don’t know why🤔. Anyways thanks 🙏🏼

Thanks!

Nice job, thanks.

Awesome video! Great camera angles! Did you have to unlock the vtc actuator on the intake cam to set the the timing or leave it locked?

Are these alignment marks apply to all Honda makes and models ?

Sorry, I mistakenly tapped dislike. This is awesome. I learnt something great 👍 about timing chain ⛓️ even though am not a Mechanic 🧰

My issue is that my top two timing marks match up with the yellow links, but my bottom crank mark doesn't line up with the gold chain link, it's about 2 tooth off. However, I put the chain on and installed the tensioner, I cranked it one revolution and all the marks lined up. My question is, does it really matter if your gold chain links do not align, as long as everything aligns back to TDC?

sweet...thxs bro

Thanks good video

That help to the noise of vtc actuator

I wonder how many mile were on it when the tensioner went south?

I just started to work on my car I installed a k&n air intake and changed the spark plugs but now I have a leak on my power steering pump and I’m thinking I might as well change the timing chain while I’m at it ? What do you think ? I would be getting the timing chain kit , power steering pump , and a new serpentine belt with water pump ?

I have a 2010 Acura TSX. Will this be the same procedure?

08 honda accord cranks but not start it send a code to the crans position senssor but i replace it with new senssor but still not start .. cranks but not start ..do you think is same problem timing chain streched .. cus i was late over oil changes .. do you think is the streched timing chain?

Can you align the timing chain without taking off the cover because of a jumped timing??

Can this cause metal shavings in oil pan

I have the same car and got a p0008 code engine position system bank 1 would that mean I need to do this or is it just the camshaft sensor

Hi bro. Do you know the nut size on the cam shaft perhaps? Thanks

thank you sir

At what miles should you reply the timing chain in the 4cyl? Some don't replace them at all

Thanks

how do I bring the marks together for camshaft and the exhaust can you tell me please

Great video! How long did this take you? What does a mechanic charge(about) to do the job?

Honda CR-V 2.0 did a head gaskets but I just removed the head I just took it apart con you please tell me how to put it back together please?

Please what is the problem? How did you learn that? Is there an annoying sound when the engine is turned on in the morning

Do u have a shop so i can bring my car to u?

excellent

I have question when align all the marks top and bottom and you turn crankshaft a couple of times timing chain marks align again

Hello can you tell me if it is the same for 2003 honda accord 4 cylinder

My timing was off after i put the new tensioner on and it deployed all the way so can I push it back and still use it? I got it backed off but do you think is it bad now that it opened up all the way?

How many miles on the clock tho???😊

Good day , I’m trying to do this but once I set the chain between the links the marks on the cam shaft don’t line up

Please what is the problem? How did you learn that? Is there an annoying sound when the engine is turned on in the morning *************

My oil pump chain on 2005 Accord 2.4L has no tension on it. How to fix it? how to bring tension to it? Thanks.

Can you do my timing belt I'm looking for someone to do that kind of work on my car

How do you replace the oil pump chain & tensioner ? 2008 honda accord .

at what mileage did the belt tensioner fail?

i have a 09 2.4 accord and i fixed this problem, replaced the cam shaft and tensioner but didnt replace the chain since i was told that there was no need . the rattling noise of the cold start went away thankfully but the p0011 engine code keeps coming back and some times the vsa light comes on shortly after starting to drive but when i turn off and turn the car back on it goes away and sometimes it dosent come on at all or comes on after a while when driving any ideas?

I have these codes with my car P0301 P0304 P0340 P0341 P0300 and I have changed the crankshaft, camshaft, battery, spark plugs. but it didnot work for me I have only 50000 miles on my Honda accord 2.4L. I have spend over a thousand dollar but I still couldnot figure it out. DO you think it is timing chain problem??

How many miles this card had when you did this ?

Is this common to go bad on these engines? I’m asking because I have 140,000 miles on my 2008. What were the symptoms that led to do this repair?

The reason you turn it clockwise is because the tensioner is on the opposite side. If you turn from the crankshaft which you should always do, then the pull is applied against the guide that doesnt have the tensioner so it doesnt move at all. If you turn it counter clockwise, then the tensioner is pushed on which causes the time to be off since the chain is technically stretched by the amount the tensioner is retracted back.

Changed ckp sensor cleared code PO339 but I can hear the chain. Think a tensioner went. This is a horrible time for this to happen. I can do the work that's not a problem just a horrible time to happen.

You don't have to turn the engine? after the timing is set.

Wat if u get po341 after swapping chain

What is the symtom of a chain going bad and need replacement anyone out there?

my tsx is cranking but wont start. Could my timing chain have jumped?

Thanks for the great video! Would you ever have to replace the sprockets if the timing chain stretches?

Great video. Enough details