How to Setup and Use Round Over Bits on a CNC Router
Рет қаралды 21,934
Күн бұрынWelcome to this in-depth tutorial on how to set up and use round over bits (also known as rounding bits) with your CNC router. In this video, I cover the secrets of CNC woodworking, teaching you how to work with round-over bits in your CNC project designs. Whether you're smoothing edges or adding decorative bevels, these bits are essential for you to add professional-looking touches on your woodworking pieces. I’ll guide you through the entire process, from the basics of what a round-over bit is, to setting it up on your CNC router.
In this tutorial, you’ll also learn how to create bead cuts, a technique that adds an elegant touch to any piece. Alongside this, we'll share invaluable tips and tricks to refine your CNC designs when using round-over bits.
Please take a moment to comment, like, share, and subscribe for more expert woodworking tips!
Get the IDC Woodcraft round-over bits → link.idcwoodcraft.com/o8iz5h
Get the 1/8" reducing adaptor → link.idcwoodcraft.com/dr8edy
Get the IDC Woodcraft router bit database → link.idcwoodcraft.com/eloig4
How to add a form tool video → • Add a Form Tool to the...
-----------------------------------------------------
LONGMILL CNC ROUTER
Longmill MKL2 CNC router review video → • Expert Insights: Revie...
Longmill website → link.idcwoodcraft.com/18un1c
gSender control software for CNC routers (FREE) → bit.ly/3y6rnwg
------------------------------------------------------
VIDEO REFERENCES
How to use masking → kzfaq.infoHEixLOi7ODY
------------------------------------------------------
ROUTER BITS FOR CNC ROUTERS
→ 11pc complete CNC router bit starter set (w/ free vector files)
www.idcwoodcraft.com/11P-SET-W
→ 1” Surfacing bit required for surfacing your spoil board: www.idcwoodcraft.com/SU-10
→ Glass engraving drag bit: www.idcwoodcraft.com/ED-14
-----------------------------------------------------
OTHER ‘MUST HAVES’ FOR CNC ROUTERS
→ Calipers: link.idcwoodcraft.com/8irif7
→ Hearing protection (plugs don't work): amzn.to/2Hs1RgW
------------------------------------------------------
Recommended Design Software
→ Vcarve Pro (RECOMMENDED)→ bit.ly/3d4WrEU
→ Vcarve Desktop → bit.ly/3D4CwjH
→ Vectric Aspire → shrsl.com/37pw9
→ Cut2D Desktop → shrsl.com/36xfm
→ Carveco (budget) → bit.ly/37rhVbY
-----------------------------------------------------
MASTER YOUR VECTRIC SOFTWARE with Kyle at Learn Your CNC
Take the full course ↓
academy.learnyourcnc.com/a/21...
Get Weekly LIVE Training ↓
academy.learnyourcnc.com/a/21...
___________________________
Starbond CA Glue Products
GET 10% OFF when you use this discount code: IDCWOODCRAFT10
---------------------------------------------
_____________________________
MAKING MONEY WITH A CNC
Words are the top-selling items of all time with CNC products. Get the free WORDS THAT SELL list: idcwoodcraft.com/cnc-lp-1/
Join CNC ENTREPRENEURS Facebook group: / cncentrepreneurs
------------------------------------------------------
CNC FREE STUFF AND MORE
CNC Insiders sign up (free files and more): idcwoodcraft.com/cnc-lp2-free...
------------------------------------------------------
NEW TO CNC OR STUCK IN A PROJECT?
Schedule one-on-one time with me: idcwoodcraft.com/for-beginners/
------------------------------------------------------
PLAYLISTS
CNC FOR BEGINNERS: bit.ly/3rg4WTl
CNC ENTREPRENEURS: bit.ly/3mxz6Ok
VECTRIC VCARVE & ASPIRE TUTORIALS FOR BEGINNERS: bit.ly/3pdmFsi
------------------------------------------------------
If you currently own a CNC router, please take a moment to take this survey to share your experience with it: bit.ly/3r5XzNh
------------------------------------------------------
Please support IDC Woodcraft KZfaq channel:
Buy me a cup of coffee: www.buymeacoffee.com/garrettf...
------------------------------------------------------
Cool vector files for CNC router & CNC laser: etsy.me/3oxX79l
------------------------------------------------------
CNC FOR BEGINNERS PODCAST: anchor.fm/cnc-for-beginners
------------------------------------------------------
Garrett Fromme
Facebook: IDCWoodcraft
Website: www.idcwoodcraft.com
Email: garrett@idcwoodcraft.com
#CNCWoodworking #RouterBits #WoodworkingTutorial #CNCProjects #DIYWoodworking #cncrouting #cncbits #vcarvetutorials #vectric
@IDCWoodcraft 6 ай бұрын
Get the IDC Woodcraft round-over bits → link.idcwoodcraft.com/o8iz5h Get the Muscle Chuck for Makita → link.idcwoodcraft.com/8irif7
@jeffreyhalye3281 6 ай бұрын
When do you think you’ll have a Muscle Chuck available for the Dewalt Trim Router?
@RickS5448 6 ай бұрын
As always Garrett, great and helpful information for the community!!
@IDCWoodcraft 6 ай бұрын
Rick, happy to help brother! Keep up the excellent work my friend!
@LYTOMIZE_Woodshop 6 ай бұрын
Time to up my game yet again... thank for constantly adding more to our knowledge base!!!! 👊
@IDCWoodcraft 6 ай бұрын
LYTOMIZE_Woodshop, you are so welcome brother!
@doggoneproductions 6 ай бұрын
Thanks Garrett, as a newbie your videos have really made it easy to get deep into CNC.
@IDCWoodcraft 6 ай бұрын
profbyers, you are so welcome my friend.
@earlthornburg9777 6 ай бұрын
Timing was perfect. I just ordered the 1/4 round over bit from IDC Woodcraft and then checked email and your video was up.
@IDCWoodcraft 6 ай бұрын
Earl, excellent timing my friend! I'm looking forward to you trying it out brother!
@paulbicknell4378 6 ай бұрын
Clear and detailed as always!
@IDCWoodcraft 6 ай бұрын
paulbicknell4378, glad to hear it my friend. Happy CNCing.
@user-do6jn2nb3n 6 ай бұрын
Great video. I just got the round-over bits for Christmas and this helps explain what I needed to know. 😀
@IDCWoodcraft 6 ай бұрын
user-do6jn2nb3n, I am so happy to hear that my friend! Happy CNCing.
@GyWO10 6 ай бұрын
I’m looking forward to this since I just bought them from you! 🤩
@IDCWoodcraft 6 ай бұрын
GyWO, right on brother! Im looking forward to getting those bits out to you.
@phillipfreer6715 5 ай бұрын
Best tutorials I've found! Thank you!
@IDCWoodcraft 5 ай бұрын
phillipfreer6715, you are so welcome brother!
@chrispelletier3661 6 ай бұрын
Very cool. Will be getting mine!!!
@IDCWoodcraft 6 ай бұрын
ChrisPelletier, right on brother! I am excited for you to pick up this game changer bit.
@Davesshoppe 6 ай бұрын
Great video showcasing how to use the round over bit! Something to try out in the future! Thanks for sharing Garrett! Dave
@IDCWoodcraft 6 ай бұрын
Dave, glad it was helpful brother! I'm looking forward to seeing what you make with it soon! Happy cncing!
@metalmangler5507 6 ай бұрын
Thanks great demo your delivery is easy to follow and understand.
@IDCWoodcraft 6 ай бұрын
metalmangler5507, you are so welcome brother!
@KimFowler29 6 ай бұрын
very nice! great directions!! Thanks!
@IDCWoodcraft 6 ай бұрын
Kim, Thank you! Very glad you like the video
@wagsman9999 6 ай бұрын
Another great video. Thanks!
@IDCWoodcraft 6 ай бұрын
wagsman, you are so welcome my friend.
@user-nd8pu8rm1e 6 ай бұрын
Great job! Good information. I always appreciate your information/teaching. I find it to be very useful.
@IDCWoodcraft 6 ай бұрын
Glad it was helpful my friend! Happy cncing!
@user-jx3gf4bq7h 6 ай бұрын
Great training, thank you
@IDCWoodcraft 6 ай бұрын
Glad you enjoyed it my friend!
@gregsettle1581 6 ай бұрын
Another great video, Garrett. I was familiar with roundover bits, but I learned a few new things. Also answered a question I was wondering about, which was using router bits with bearings. Thank you!
@IDCWoodcraft 6 ай бұрын
Greg, thanks for the kind words my friend! I'm glad the video helped clear up some confusion with the round over bit! Happy cncing!
@urbancare5972 6 ай бұрын
Thanks, Boss! Much appreciated- This makes it very clear! Mike in Maine
@IDCWoodcraft 6 ай бұрын
Mike, you are so welcome brother!
@michaellevine6019 6 ай бұрын
GREAT JOB Garrett!! I have not yet used any round-over bits with the cnc. Great tutorial and explanations on everything.....
@IDCWoodcraft 6 ай бұрын
Michael, Looking forward to seeing what you make brother!
@Kindbus 6 ай бұрын
I was actually going to email you and ask you how to do this. Bits set ordered thanks for the great video!
@IDCWoodcraft 6 ай бұрын
Kindbus, glad I could help my friend and that the timing worked out well for you! I'm looking forward to you giving it a try!
@ralphalameda1381 6 ай бұрын
Thanks Garrett Another great video on round overs bits. This would make better use of my time by using theses bits rather than on the router table. You made using the bits easy and instructions were right on
@IDCWoodcraft 6 ай бұрын
Ralph, you're so welcome brother! You're absolutely right, the round over bit can definitely save you some major time with your projects. Happy cncing!
@peterlokhorst6881 5 ай бұрын
Very helpful
@IDCWoodcraft 5 ай бұрын
PeterLokhorst, so glad to hear that my friend.
@garyfoster3076 6 ай бұрын
Damn good video. Impressed with IDC
@IDCWoodcraft 6 ай бұрын
Gary, Thank you for the kind words. Happy CNC'ing
@bluesuede69 6 ай бұрын
Great video Garrett, thank you. I will try mine out on the next project I make, likely another cribbage board...😎
@IDCWoodcraft 6 ай бұрын
bluesuede69, thanks brother! I'm looking forward to you giving it a try!
@jimpalmer1944 6 ай бұрын
Good to know.
@IDCWoodcraft 6 ай бұрын
Jim, glad it was helpful brother!
@theyardsalellc6092 6 ай бұрын
Every time you do a video, i want to buy the bit.
@IDCWoodcraft 6 ай бұрын
theyardsalellc6092, LOL well now when you get your round over bit you'll be ready to hit the ground running with it my friend!
@bentebrunsvelt319 6 ай бұрын
Super cool 😂😂😅
@IDCWoodcraft 6 ай бұрын
bentebrunsvelt, so glad you enjoyed this one brother.
@eddiejones4708 Ай бұрын
Hi Garrett, do you have a tutorial on how you created the gear style for the clock face? As with all your info a great explanations. Keep up the good work, looking forward to Wednesday with Kyle.
@IDCWoodcraft Ай бұрын
eddiejones4708, Hey! I'm glad you enjoyed the content. Unfortunately, I don't have a tutorial for the gear style clock face at the moment. Kyle and I have some exciting projects planned, so stay tuned!
@jeffteeter501 6 ай бұрын
Oh, brother! I am reminded of my apprenticeship where I learned to grind my own form tools. Is the shank on your round over bits, hss or carbide?
@IDCWoodcraft 6 ай бұрын
Jeff, great question brother, the shaft of the round over bit is HSS and the tip of the bit is carbide!
@JS111952 5 ай бұрын
Garrett, great video on the round over bits. Question did you cut through the material with a profile Toolpath prior to using the roundover? If yes, what kept the material in place? Tabs, Instant Glue?
@IDCWoodcraft 5 ай бұрын
JS111952, I sure did use a profile toolpath to cut it out prior to using the roundover brother! For this project I used the painters tape and super glue method.
@JavierDeJesusSr 3 ай бұрын
Great video. Which I would have seen it earlier cause I have a question... If the radius is the same as your stock thickness, can you use it to cut out your piece at the same time?
@IDCWoodcraft 3 ай бұрын
JavierDeJesusSr, you sure can brother but for the cleanest cut and longest life for your bit I suggest you use a seperate profile toolpath to cut out your project first.
@TerrapinCreations666 6 ай бұрын
Did you seal the wood before applying the masking to prevent bleeding?
@IDCWoodcraft 6 ай бұрын
Absolutely! That's very important to do. Great question and insight!
@TetraCNC 6 ай бұрын
Nice I just bought both round over bits when I got the badger and wondering how to use them, now I don't have to experiment as much. I was going to ask With the bead - do you need to run the round over tool path first or can you run it as one but I see you already answered that question below - Yes Multiple passes
@IDCWoodcraft 6 ай бұрын
TetraCNC, right on brother! I'm looking forward to seeing what you create with them now my friend! Happy cutting!
@HowToFromMeToYou 6 ай бұрын
Hey Garrett another great video! Will that muscle chuck fit the routER11 router ?
@IDCWoodcraft 6 ай бұрын
HowToFromMeToYou, not yet brother! But I have been working with Mucsclechuck to provide more options to routers like yours in the future.
@HowToFromMeToYou 6 ай бұрын
@@IDCWoodcraft thanks Garrett, keep me posted... I'd like to get one ASAP
@kaseylarson3266 6 ай бұрын
Great informative videos! Thank you! What's the best way to eliminate witness marks when routering HDPE is it the same idea as changing to a shallow last pass depth? Using an o flute up cut bit. Thanks in advance
@IDCWoodcraft 6 ай бұрын
KaseyLarson, great question! To minimize witness marks when routing HDPE with an O flute upcut bit, a shallow last pass is effective. Additionally, ensure your bit is sharp, your machine is stable, and the feed rate and spindle speed are correctly set to prevent the plastic from melting. A consistent cooling method to keep the material cool can also help achieve a smoother finish.
@kaseylarson3266 6 ай бұрын
Fantastic thanks so much for answering my question! I really appreciate your help!
@user-zn2rs8cc9j 6 ай бұрын
Using this form tool does it make a difference if you select a climb cut versus a conventional cut? Always enjjoy and learn from your videos.
@IDCWoodcraft 6 ай бұрын
Brother, this one really depends on the wood, grain, and specific project you're working on. In some instances yes, but its a little tricky to walk you through over comments. I recommend joining Kate and I for our weekly live sessions we host every Wednesday at 8PM EST and we should be able to give you some tips!
@johngibson540 6 ай бұрын
Hi Garret, great vid as usual. One question about using a round over. If you have a finished project eg a cutting board and you wanted to round over the edges, is it possible to measure so accurately that you can achieve a consistent round over? John
@IDCWoodcraft 6 ай бұрын
John, that is a tricky one brother. For that I might recommend that you perform the roundover manually with a manual roundover bit.
@johngibson540 6 ай бұрын
Garret one further question. Is it advised to protect the edges of an end grain board in case of chip out and if so, how? What settings would you advise eg feed rates etc? John
@billholt5573 Ай бұрын
Hey Garrett. Is the muscle Chuck still available? I don’t see it in your store.
@IDCWoodcraft Ай бұрын
billholt5573, The muscle chuck is currently not for sale. Some CNCers were having problems with them and I want to make sure the product is perfect before releasing it again brother!
@JamesLinger-wl8sq 3 ай бұрын
it seems to me that I could put a round over bit in and use the 1/4 inch endmill tool selection as long as you are cutting on the line and remember to set your depth of cut for the roundover bit. The simulation would be different but how would the machine know the difference. Also can the muscle chuck be used in a 3 hp spindle. Thanks
@IDCWoodcraft 3 ай бұрын
JamesLinger-wl8sq, that would be a great call for a setup brother! As for the muscle chuck, not yet Ive been working directly with muscule chuck to provide more options for spindles in the future. Ill keep you in the loop!
@PaulSchuster-yj4zb 3 ай бұрын
I have not zeroed from the machine surface before. When doing so, do you set the material depth at its actual distance or add a bit? AND when using the rounding bit in this context, and considering the cutting depth for the roundover bit is critical, causing the appearance to vary with small changes, do problems show up if you are cutting stock with slightly different thickness... or How critical is consistent stock thickness when zeroing off of the machine bed and using form tools like the roundover bit?
@IDCWoodcraft 3 ай бұрын
PaulSchuster-yj4zb, great question brother! Zeroing from the machine bed can be super useful, especially when your material isn't uniform. You measure the material thickness, tell your software, and you’re good to go. This way, even if there's a little inconsistency in your stock thickness, it won’t mess with your cut depth as much because your starting point remains the same. With a roundover bit, getting that cutting depth just right does matter a lot for that perfect edge. If your material thickness varies and you're zeroing from the bed, you might see some differences in the profile. But if your pieces are pretty close in thickness, it should all work out okay. If you’re really looking for precision or your stock varies a lot, zeroing from the top might be the way to go for each piece, particularly when you're aiming for a flawless roundover finish. It's a bit more work, but hey, it can give you that consistency. Hope this helps, and if there’s anything else you’re scratching your head over, just holler. Always here to help out!
@seannalexander 6 ай бұрын
oh what a coincidence, I just bought this bit.
@IDCWoodcraft 6 ай бұрын
Sean, excellent timing brother! I'm looking forward to you giving it a try for yourself!
@NWGR 2 ай бұрын
Garrett, I downloaded your database for carveco maker and noticed that the beast isn't in there. Do I just select the 1/4" upcut?
@IDCWoodcraft 2 ай бұрын
Use the data that is in the IDC Woodcraft app. Of you didn't have it, just go to your app store and search IDC Woodcraft. Either apple or Android
@casenundra78 6 ай бұрын
Do you have a Muscle Chuck that will fit the Carbide 3D router ?
@IDCWoodcraft 6 ай бұрын
Not yet! I have been working with muscle chuck to provide more options for machines like yours so thanks for your feedback on that one. Ill keep you in the loop!
@kenyounce4479 6 ай бұрын
@@IDCWoodcraft Desperately need one for the X Carve Pro spindle! That is time savingly AWESOME!
@cablsurfin 6 ай бұрын
Would a V bit be able to do the same cut as the 1/8 rnd in this case? If so, what's the advantage of using the 1/8 rnd? Thanks.
@IDCWoodcraft 6 ай бұрын
cablsurfin, Excellent question brother! It all depends what you're trying to do with the cut. A V bit would be able to make the same cut, but the edge would be straight. I was looking to get a gentle curve in the Ying Yang design. That's why I chose to cut with the IDC 1/8 Round Over bit.
@cablsurfin 6 ай бұрын
Ah, that makes sense. Thank you for clarifying.
@emostorm7 6 ай бұрын
Hi Garrett
@IDCWoodcraft 6 ай бұрын
emostorm7, thanks for watching my friend!
@sinsofvorador 3 ай бұрын
When are y'all going to have the muscle chuck in a er11 size
@IDCWoodcraft 3 ай бұрын
sinsofvorador, not yet brother! I have been working with muscle chuck directly to develop something like this for your ER11 collet. Ill keep you in the loop!
@sinsofvorador 3 ай бұрын
@IDCWoodcraft awesome. Love to get my hands on one
@Sil3nt1985 6 ай бұрын
What masking material is it you are using?
@IDCWoodcraft 6 ай бұрын
Sil3nt, I use Oramask. I absolutely love the stuff. Makes painting and finishing projects so much easier. Here's a link amzn.to/3RCMKkL
@Sil3nt1985 6 ай бұрын
@@IDCWoodcraft Thank you so much. It looked like it cut away so easy. I've had other stuff that would rip off as the cutter passed.
@SamAgro2024 3 ай бұрын
I am posting this here because this channel seems to be very knowledgeable in the field. I want to punch very precise multiple holes (0.5 - 1mm diameter) on a sheet of substrate (similar to PCB but softer rubber like) reproducibly using a cheap chinese CNC machine. The sheet is already marked with circles where the holes should be made. I am aware that the XY 00 can be set every time i place a substrate workpiece on the bed. However, the substrate overall dimensions are not always accurate and therefore, there will always be some rotational misalignment of the entire layout each time i place a new substrate. I am wondering if there is any way of manually providing the software 2 or more reference points across the substrate (e.g. one at xy=00 and others at the far end of the substrate and the layout) so it knows the angle of rotation and maintains the alignment and hole locations precisely within the circles on the substrate matched with the CAD drawing? The second part of my question is whether i can connect an automatic center punch (with a hole pin instead of a solid punch pin) instead of a drill and tell the machine to simply lower down where holes need to be made. Then move up, go to the next position and lower again and so on.
@IDCWoodcraft 3 ай бұрын
SA-wp4vt, This one is a little tricky to walk you through over comments my friend. I recommend joining Kate and I for our live sessions we host every Wednesday evening at 8PM EST. We should be able to help walk you through it then brother!
@wadetomczyk8043 6 ай бұрын
Now a video I can watch fully all others eh toooo long I get bored fast haha.
@IDCWoodcraft 6 ай бұрын
Wade, fair enough brother sometimes I do get a little long winded! I'm glad you enjoyed it! Happy cncing!
@timothyburchfield2220 7 күн бұрын
What happened to the Muscle Chuck? I can't find it on your site.
@windmillbk 6 ай бұрын
I really like the way you stick with the training on-hand. It would get so confusing if you had to show everything. Not to mention a very long video.
@IDCWoodcraft 6 ай бұрын
CRSpices, glad you liked this one my friend! Happy CNCing.
@vigenboghossian6452 5 ай бұрын
Hi there is your product available on amazon
@IDCWoodcraft 5 ай бұрын
Vigenboghossian, I sure do brother! Here is a link: www.amazon.com/IDC-Woodcraft-Edge-Rounding-Bit/dp/B0C9NQWFHZ/
@vigenboghossian6452 5 ай бұрын
Thank you
@pigpickler Ай бұрын
The link to the Muscle Chuck is wrong. It takes you to industrial calipers.
@IDCWoodcraft Ай бұрын
pigpickler, Thank you for bringing this to my attention. I will update the link as soon as possible!
@user-rh6wl3iz9n 6 ай бұрын
The 1/4 inch roundover seemed to magically cut through the 3/4 inch material?
@IDCWoodcraft 6 ай бұрын
Sometimes it feels like magic brother. If I understand your question, you're asking why I used the 1/4 inch round over on about 3/4 inch material. The 1/4 inch refers to the cutting radius of the bit, not the bit length. I was looking to get about a 1/4 inch radius on this project in addition to the Bead cut. To Accomplish this I used the IDC 1/4 Round over bit for the curved edge. At the end of the video I show that extra little line on the project that you can sand off, that line is where the tip of the bit stops. That line shows where the bit stopped being able to cut. Hope that helps!
@user-rh6wl3iz9n 6 ай бұрын
You did not understand my question. It appears on the video that the ¼ inch roundover bit, when used to create the upper 1/8-inch step, is cutting through a ¾ inch material. That is not possible. I have used roundover bits for many years on a router table to achieve an similar appearance, such as on the edge of a dining table. I feel that a second cut with any vertical bit would be necessary to complete the separation of the pattern form the stock. It appears to me that you used MDF for the video, I assume for ease of demonstration. I only am working in hard woods; therefore, I believe your presentation is either incomplete or disingenuous for folks new to woodworking. I do not intend any disrespect for your bit. I have used it and it delivers the expected round edge. I am now trying to perfect the so-called bull-nose with your bit on the Longmmill. Respectfully, John Garnett
@tsmarcot 5 ай бұрын
Garrett mentioned that he is doing the cutout first and just shows a quick video if that process as it was NOT related to the roundover bit toolpath. He used a strait bit and you can see it briefly after he mentions that he was not going to show the cutout process in detail. You are correct that a roundover bit is not the correct bit to use for a cutout, but please remember that Garrett is professional and is well aware of this. There is no need to leap to conclusions and accuse him of being "disingenuous" when the video shows that a strait bit was used. @@user-rh6wl3iz9n
@zachmiller4981 5 ай бұрын
How do you zero x and y ?
@IDCWoodcraft 5 ай бұрын
zachmiller, I have a video that should really help you brother! Here is a link: kzfaq.info/get/bejne/i8d0gN2dxMC8hps.htmlsi=OG1vMKMLR9xIIG0s
@zachmiller4981 5 ай бұрын
@@IDCWoodcraft Thank you !
@zachmiller4981 5 ай бұрын
So in the video I watched is it the same process you would do with a roundover bit ?
@raadouro226 4 ай бұрын
If I want to spend about $5000 on CNC which one should I buy
@IDCWoodcraft 4 ай бұрын
raadouro226, I have a video that should really help you narrow down your CNC choice. It will really help you determine what to look for when buying a CNC. Here is a link: kzfaq.info/get/bejne/rbKGgalhsZO-lIk.html
@TheUnionStreetWorkshopcom 6 ай бұрын
If you were going to do a beading profile from the start would u have to make multiple passes to reach full depth?
@IDCWoodcraft 6 ай бұрын
Hi Mike. Yes you would. Great thinking about how to do this!
IDC Woodcraft
Рет қаралды 356 М.