How To Setup Jumper T 20 Gemini ExpressLRS

Рет қаралды 2,505

6 ай бұрын

In this video, I'll walk you through the Gemini ExpressLRS setup on the Jumper T20. Discover the unique features of Gemini technology, including its dual transmitter modules that enhance link quality. I'll guide you step-by-step on setting up a new model in the Jumper T20, focusing on essential settings like the ADC Filter, Crossfire protocol for internal RF, and USB joystick configuration.
Learn about channel mapping and switch setup in line with Betaflight, and understand the process of downloading and using the ExpressLRS configurator. I'll demonstrate how to flash your transmitter with USB and set up Wi-Fi for easy firmware updates.
Additionally, I cover the specifics of using Gemini receivers, offering tips for optimal performance and managing a mixed fleet of Gemini and standard receivers. The tutorial also includes a practical guide to flashing ExpressLRS via Wi-Fi and troubleshooting for a smooth setup.
Whether you're new to FPV drones or an experienced pilot, this video is a comprehensive resource for mastering the Gemini ExpressLRS on the Jumper T20. Subscribe for more expert advice and tips in FPV drone technology!
🙋🏼‍♂️ Want to Build a 5" Freestyle Drone but don't know where to start?
I put together a full course 🎓, that covers absolutely EVERYTHING, that's right EVERYTHING!
Here are all the modules included in the course 👨🏼‍🏫
The course includes specific lessons for each video system: DJI O3, HD-Zero, Walksnail and Analog!
- What parts you need,
- Tools,
- Skills you need
- Expensive Mistakes to avoid
- Choosing a Video System
- Choosing a Radio System
- 4S vs 6S
- Budgeting
- Specs of your Video System for building
- Frame compatibility with your video system
- Flight Controller compatibility with your video system
- Choosing an ESC
- Stack or Separate FC / ESC
- Choosing a Flight Controller
- Frame assembly
- Dry Fit electronics
- Installing Your Video System
- Installing Motors
- Soldering Motors to ESC
- Install Radio Receiver
- Final Assembly
- ESC configuration
- Full Betaflight walkthrough to setup & preset tuning
- Betaflight setup for your video system
- Final Checks
- putting props on
Want to learn how to how to build instead of being shown a build to follow along to:
👉🏻 www.udemy.com/course/5inchfre...

Пікірлер: 15

@rufuscollis303 3 ай бұрын

That was soooo unbelievably helpful. Thankyou!!! 💛

@DarrenAllatt 3 ай бұрын

Glad I can help!

@SalaamAleikum 5 ай бұрын

Thank you very much, your video is helping me understand this new system, which I am thinking about buying. Congratulations

@claygrosskopf7097 5 ай бұрын

I make it to the USB serial vcp and then no edge tx in windows. PC recognized the usb input but cant update.

@GiantAntCowboy 6 ай бұрын

Nice helpful video bud, cheers!

@DarrenAllatt 6 ай бұрын

No problem 👍 Glad it. helped!

@shargrim1 4 ай бұрын

You have a great channel. And although my English is far from perfect, thanks to technology I can learn from you. Thank you. Now looking forward to reviewing the new t14 jumper. I am very interested in the build quality and internal components, as there is a choice between the boxer and the t14. $156 and $92 is a significant difference or is it worth overpaying?

@DarrenAllatt 4 ай бұрын

I’m working on my T14 review as we speak. Internal components are pretty much the same, there isn’t a lot of difference. It’s not like a car engine where you have low grades of steel vs high grades. There is practically no difference If you want to make a budget friendly decision go the T14

@SalaamAleikum 5 ай бұрын

I'm not sure if I'll buy Gemini, or Tbs Tango 2 pro. As I sold my old radio with TBS module, could you give me a tip on which one you would recommend to buy again in 2024? I really liked this Gemini. Thanks

@DarrenAllatt 5 ай бұрын

If you fly Crossfire, just get the normal T20 and not the Gemini because a need for ELRS it’s pointless.