Рет қаралды 35,931
In the first episode of: Will it Sharpen, Josh surprises Kyle with a Benchmade Infidel. The single bevel, spear point, dagger style can be a challenge to some but Kyle breezes through coasting on practice with these blades.
The Infidel is sharpened at about 30 degrees and you can check this using the sharpie method we show in this video: • What is Edge Angle? Ho...
Sharpen each side of the dagger on the beveled side and remember to stop with the tip of the knife in the middle of the belt or abrasive plate, this will create a sticky sharp tip.
Once a burr has been created along the full length of the blade all the way out to the tip then switch to a fine abrasive.
First, polish the edge with the bevel, and then finally remove the burr on the back, non-beveled side, of the blade. This will protect the chisel grind of the knife. Using a leather strop to remove the burr is a good option, however it may require alternating sides on the beveled side and the flat side before the burr falls off.
Skip Intro: 0:35
What we're about to do: 2:11
Fire up the sharpener 5:00
Buffing/Removing the Burr: 8:22
Before and After: 11:04
Learn more at: www.worksharptools.com/education