How to Succeed on The Carpenter Apprenticeship Math Pre Exam with Link to Practice Exam and Key

Рет қаралды 49,939

4 жыл бұрын

This is a how to video on the carpenter's apprenticeship math exam. Print the link to the test:
drive.google.com/open?id=0B--...
Try and do the problems and then watch me go over the problem. I don't do all of them, but a few of the key problems. I teach math and woodshop and was a building contractor before I taught. Some of my favorite tools: www.amazon.com/shop/colfaxmath

Пікірлер: 133

@wolfrus1809 3 жыл бұрын

Watched this 20 times.. I take my test in like 45 mins I hope this helps

@Ty-zy4lh 3 жыл бұрын

Did it end up helping at all?

@ColfaxMath 3 жыл бұрын

Glad to hear it

@davidba7418 3 жыл бұрын

Did you pass? Was this the same test you took? And what state are you in? Im in Washington. Not sure if all the tests are the same

@dionwilliams7798 2 жыл бұрын

Did you pass. I take mine in 3 days

@corbandallas1970 2 жыл бұрын

So? I'll take it as you didn't do pass.

@gloomsouls 3 жыл бұрын

Thanks for devoting your time to this, makes it a lot easier for a lot of people I think.

@ColfaxMath 3 жыл бұрын

Glad to hear it

@mavenfeliciano1710 4 жыл бұрын

@26:18 😂 😂 😂 None of the carpentry/construction work that I’ve done ever used most of these. Everyone I’ve seen keeps it simple. I don’t have any formal training so was curious about this stuff. It’s bringing me back to H.S. math. Though I’m quite good in math, I don’t use more than the basics so I forgot some of these things. Good refreshing every once in a while. 😀

@wilsonb5417 3 ай бұрын

Glad to know that I'm failing my test tomorrow.

@ColfaxMath 3 ай бұрын

Never too late to study

@johnmiller5987 8 ай бұрын

I really don't know how relevant this is. I took the test back in 96. Basic high school math. Now here's the important part. Once we were in class everybody used a calculator. Except me. I slowed the whole class down. Wrote everything out on paper. So I made sure I learned it. Never helped me in the field. Everything is pre-built. Do you really think that you are going to get to use your brains on a union job today. Only speed matters. You will use this a little. But unless you are a special talent and being groomed for success. You will never get to cut stairs or rafters. However, I do believe that all of this is important to know. And there is a need to eliminate people who don't want to be or shouldn't be there.

@ColfaxMath 8 ай бұрын

Good insight

@patrickmoore6892 3 жыл бұрын

Very clean descriptions of all the math here. I like your teaching style! I am also a math teacher for Building/Construction trades and former carp.. I will borrow a few of your tips.

@yourwifesboyfriend1948 3 жыл бұрын

How accurate was the math on here?

@chris123chris82 2 жыл бұрын

What can I expect for the first year in class portion? I'm so excited and want to know more haha

@connorlowis4774 3 жыл бұрын

I'm taking the iron workers math test but couldn't find a single video on it so I've been googling similar union math tests. This was a BIG help, because I have a strong feeling the "basic math and measurements" test is gunna have questions in the same exact vein as this test here. thank you.

@ColfaxMath 3 жыл бұрын

Yes, I think that is correct almost all the standardized math tests are pretty similar for union entrance exams

@connorlowis4774 3 жыл бұрын

@@ColfaxMath awesome thank you for the response, gunna rewatch your vid again tn. Have the test in a week, been practicing climbing Ibeams after hours at the mall parking garage haha

@maxnovakovics2568 Жыл бұрын

@@connorlowis4774 haha some things can't be taught, nothin to it but to do it

@zephyr1408 Жыл бұрын

I am a finish contractor and this type of test is merely showing your ability to learn and think quick! I use a const pro calculator for brd ft, ln ft, sq ft, volumes and add subtract often in my head to configure total ln in cabinetry! And so on! However make no mistake in order to be successful you must use basic math constantly & consistently correct!

@ColfaxMath Жыл бұрын

Yes, very true

@tylerbelanger2663 4 жыл бұрын

Really good info in this!!

@RedCrow. Жыл бұрын

Really appreciate the time brother awesome review.

@ColfaxMath Жыл бұрын

Thank you

@mariabarriga-miranda7613 Жыл бұрын

I want to personally Thank you very much for taking the time and showing us step by step on going thru this test to get a better understanding 😁

@ColfaxMath Жыл бұрын

Great to hear, glad it was helpful

@LINX29X92 3 жыл бұрын

DAMN took the basic math classes in college and they said that's all you ever need for your major. Almost 10 years later and here I am. Screw you society.

@ColfaxMath 2 жыл бұрын

@ucegee 2 жыл бұрын

Really wanting to join the carpenters union, so this video definitely helps. I’m 24y/o and worked a lot in the warehouse driving forklifts so I am clueless on what to expect and what to learn. Appreciate this video 🤙🏾

@ColfaxMath 2 жыл бұрын

Glad it helped, keep studying, it's a great career

@freejoy3840 11 ай бұрын

So it’s …show your work ?..

@Maseko66 3 жыл бұрын

Thank you 💙

@ColfaxMath 3 жыл бұрын

Thank you for the support

@izzyc.4746 2 жыл бұрын

LOVE IT ❤️❤️

@ColfaxMath 2 жыл бұрын

Glad to hear it

@mawliidcilmi5207 2 жыл бұрын

Very helpful I just confused little bit about question number 18.

@ColfaxMath 2 жыл бұрын

Glad it helped

@bluerune7305 2 жыл бұрын

Thank you for this video. I now realize I have alot of work to so. I haven't done math like this in about 15 years or so. I need to study. I start my schooling for apprenticeship in September. Honestly this video has made me a little nervous lol

@ColfaxMath 2 жыл бұрын

You'll do great, just do a little every day between now and Sept

@chris123chris82 2 жыл бұрын

What can I expect for first year in class?

@zephyr1408 Жыл бұрын

Oh and learn to read plans! Yes do it asap!

@ColfaxMath Жыл бұрын

@daviddorame6747 2 жыл бұрын

Ive been looking for a Laborers Apprenticeship Practice test all over the internet but have only found the usual trades. Not a single one for Laborers. Do you know of any you can recommend? It's been awhile and I want to brush up. I have an opportunity to skip a level or two and start off making more. Any ideas you might have are welcome!

@ColfaxMath 2 жыл бұрын

I haven't seen one but imagine the math portion probably the same as all the others

@davidba7418 3 жыл бұрын

@ColfaxMath is this a common test across the U.S.? Taking my test next month. In Washington

@ColfaxMath 3 жыл бұрын

Yes for entrance into the union

@jessehussle4883 4 жыл бұрын

ColfaxMath hello, I stepped away from my Diesel mechanic trade. I’ve been a mechanic for 4-5 years I’m 23 and recently left diesel behind pursuing carpentry. I’ve always had a thing for building projects and sheds and dog houses. I’ve been working for a contractor who has good reputation here in Monterey County CA. But I’ve only been doing concrete work. Long 10-12 hours pretty heavy material. As far as joining a local union what do you recommend or advice me to do? Great videos btw!

@ColfaxMath 4 жыл бұрын

If carpentry is what you really want to do get a job with a high quality contractor. You might have to sacrifice a higher wage for more learning. The good builders out there have alot to offer and in no time at all you can start doing side jobs to add income.

@josephweber8257 Жыл бұрын

I really want to join the local 265 apprentice program as a sheet metal worker and am wondering if you know of any good math books to study before taking the aptitude test.

@ColfaxMath Жыл бұрын

I have a whole playlist called foundations of math that is a full review for a union test. I also have a few recommendations on my Amazon store

@delanedaugherty7193 Жыл бұрын

Does anyone have any links or helps for doing well on the video tests for workplace readiness for carpenter apprentice. Trying to find some practice tests and can’t find any. Thanks

@ColfaxMath Жыл бұрын

I don't have any

@alexdelgadillo1569 2 жыл бұрын

Is there another video that can help on the fraction so don’t understand why he used to different formulas for the same type of equations

@ColfaxMath 2 жыл бұрын

Happy to make another video, can you tell me.what you want on it? Adding fractions?

@danieltrujillo5394 3 жыл бұрын

I am trying to find the painters apprenticeship math test so I can join the IUPAT, I would greatly appreciate it if someone knows about the assessment exam.

@ColfaxMath 3 жыл бұрын

I'll look into it

@levistratus8644 3 жыл бұрын

Is this test the same up here in Canada as the States...?

@ColfaxMath 3 жыл бұрын

Sorry, I don't know

@abbylouk9268 2 ай бұрын

Does anyone know if you’re able to use a calculator for some of the questions?

@ColfaxMath 2 ай бұрын

I'd check with your local

@BopCentral808 2 жыл бұрын

This is so hard for me. I’ve been scared of math all of my life. Idk if I should study. Or find something new..

@ColfaxMath 2 жыл бұрын

I know math can be intimidating, but if you start at the beginning and go slow to really get the ideas, you can figure it out. It just takes time and work and you'll get it. If this is what you want to do, put the time in and figure this out.

@sladewagemann9778 9 ай бұрын

At 18:20 why did you multiply 12×12?

@mariabarriga-miranda7613 Жыл бұрын

I am having a problem on how to Multiply Question 11. 3/7 x 5/9 x 1/2 =

@ColfaxMath Жыл бұрын

Multiplying is a lot easier than adding. You multiply across the top and across the bottom. You can reduce first or afterwards. The numerator would be 3x5x1 equals 15 and on the bottom 126. So the answer is 15/126 but can be reduced because 3 goes into both to give you the reduced fraction 5/42

@mariabarriga-miranda7613 Жыл бұрын

For number 28 , Do I just add $63.59 + 7%+6%? I don't know how else to get the answer

@ColfaxMath Жыл бұрын

Yes that would work

@DanielReyes-mr8ln Жыл бұрын

So if you don’t pass this exam you won’t be able to be in the program? Even if you got sponsored in by a company?

@ColfaxMath Жыл бұрын

You should check with your local union

@alexgrullon33 4 жыл бұрын

Hello there , where are you stationed at ?

@ColfaxMath 4 жыл бұрын

California

@jessehussle4883 4 жыл бұрын

@iainsmith6631 2 жыл бұрын

What math is required for the carpenter apprenticeship exam?

@ColfaxMath 2 жыл бұрын

Basic math, intro to algebra, some geometric reasoning

@user-xu8wj5dj4f 4 жыл бұрын

Stl? How can a journeyman not know this?

@jalen5426 7 ай бұрын

For number six how do u get to over 60k I only got around 12,000. Or do u bring down a zero because the 5 is in the ten place

@ColfaxMath 7 ай бұрын

Yes

@chris123chris82 2 жыл бұрын

Can anybody tell me what to expect first year?

@ColfaxMath 2 жыл бұрын

Check in with your local and ask if there is a union member you can interview. That will also help build a relationship with someone in your local

@devapoojavenu4012 2 жыл бұрын

Hello, this is a resident of INDIA, and thank you for your videos...Actually, I am going to give the CERTIFICATION OF QUALIFICATION exam as a carpenter conducted by ONTARIO TRADES COLLEGE(CANADA) please help me out to crack this examination.....

@ColfaxMath 2 жыл бұрын

Good to hear, do you have a link to a practice test?

@devapoojavenu4012 2 жыл бұрын

@@ColfaxMath No, but I don't have such a thing so I am asking for the material and a few suggested books for me and I am a carpenter.....just help me out in clearing the C of Q exam...

@agm2841 Жыл бұрын

Is it almost the exact same test in person?

@ColfaxMath Жыл бұрын

Good to hear

@dreamsaresharedhere_ Ай бұрын

16 goes into 17 one time so its 1 1/16 is confusing because then wouldn’t every number under 32 go into 16 only once, making it always 1 1/16? I know I’m missing something

@ColfaxMath Ай бұрын

if it was 19/16 it would be 1 and 3/16. For numbers under 32 you would go up by a 1/16 for every number you go up

@moh.alsam.3565 5 ай бұрын

How many litres in a gallon is 3.79 litres

@ColfaxMath 5 ай бұрын

Yes, that is correct

@s.zepeda2323 2 жыл бұрын

What happens if u fail that math test

@ColfaxMath 2 жыл бұрын

You probably can retake it at a later date

@MuttonChops24 3 жыл бұрын

so this video tells me im too stupid to hammer nails into wood.

@adeptmotion4962 3 жыл бұрын

I feel you. I’m trying learn this again

@yourwifesboyfriend1948 3 жыл бұрын

Have you tried Khan Academy?

@cameronmills3414 2 жыл бұрын

iv been framing for 12 years and never used .0025 of any of this and I have to take the test tomorrow lol

@ColfaxMath 2 жыл бұрын

Good luck

@cameronmills3414 2 жыл бұрын

@@ColfaxMath u think the question are the same and we are allowed calculator? How bout notes for formulas

@VeganGorilla555 3 жыл бұрын

Near the end of the "tutorial" you stopped showing how you got the answers and just answered the questions. Not to mention that you skipped right over the long division question and when you moved over to the fractions it seemed that you're just putting numbers out of the air.... I have had no need to do this type of math in about 30 years and now I may have an opportunity to start an apprenticeship and need the help brushing up on my math....

@ColfaxMath 3 жыл бұрын

Sorry, I didn't finish it up properly. I figured few people would stick to the end and most folks just wanted more of an overview. I'll create a more complete video in the future.

@BValor-xo4gi 10 ай бұрын

I’m a little confused on how he got some of the answers 🤦🏾‍♂️

@ColfaxMath 10 ай бұрын

Sorry if I went a little too fast

@nman2008 3 жыл бұрын

There are 3.785 Liters in a Gallon

@ColfaxMath 3 жыл бұрын

Thanks for adding that

@fatboyflizzy3489 3 жыл бұрын

Taking my test Monday and I feel dumb

@ColfaxMath 3 жыл бұрын

Keep reviewing

@ucherichardegbu5739 3 жыл бұрын

How much will u make when u graduate as a carpenter..???

@adeptmotion4962 3 жыл бұрын

@@ucherichardegbu5739 depends on your location. Do research

@yourwifesboyfriend1948 3 жыл бұрын

Have you tried Kahn Academy? It really helped me. You can also go to Work One, or a community college, and you can get free tutoring.

@fatboyflizzy3489 3 жыл бұрын

@@yourwifesboyfriend1948 I actually passed my exam and got into the carpenters union !!

@4Brazy 4 жыл бұрын

damn i thought this was gone be hard this grade 5 math lol

@launchjupiter825 2 жыл бұрын

Facts

@kalyahwalker1332 3 жыл бұрын

Maybe some music would be cool like something and maybe a little more of why we change numbers just because it’s hard to keep up with the reasons why 💭

@ColfaxMath 3 жыл бұрын

Ok, I'll try and do some more explaining of the reason why. Thanks for the feedback.

@austinstephensparks 2 жыл бұрын

more explaining would cool but idk about the music.. thats just my opinion

@aryansagar3800 2 жыл бұрын

Sir . its too easy in india exams are not that easy🥲

@ColfaxMath 2 жыл бұрын

@ryanporter398 4 жыл бұрын

Answer for question #32 is wrong on PDF answer is 6

@brianyoung5653 4 жыл бұрын

Looks like he skipped question 11.

@TheDarbicus 4 жыл бұрын

24 is also wrong on the pdf... (1.3/2)^2*pi*2.8 is 3.7165 not 3.718. if you use 3.14 its 3.71462.

@bradleyd7895 4 жыл бұрын

You got the very first problem wrong...? LOL nevermind I thought that was 6,399.... wow...

@simonpedersen9703 3 жыл бұрын

Why do you need math to be a carpenter???

@ColfaxMath 3 жыл бұрын

You don't for nailing pre cut boards together, you need math to get in the union, read plans, do layout, plan out projects, do your own jobs, cut rafters, stairs, ... Math is just another tool to have in your bags to save time and materials.

@ucherichardegbu5739 3 жыл бұрын

@@ColfaxMath does the stress what it after graduating as a carpenter...?? Annual income.. ??? How much minimum...????

@davidba7418 3 жыл бұрын

@@ucherichardegbu5739 in Washington state journeymen make $45.92 an HR. Google ur local union. Its on their website.