Best video available right now.

I finally made the adjustment to the pump and what a difference, 1985 gmc p-30 non turbo step van with 6-5 i set it between the non turbo and turbo setting ,, between 2 and 3 o'clock and I hit the hill and I can barely see a black mist coming out of the pipes, and it picked up a lot more power and torque hell ya,, so dont think about it just do it..

Thanks for posting Eric. Your video was helpful.

Great explanation Eric Big Thanks for your video

Great that you share your knowledge for all to use!

Outstanding! Didn’t know you could get to it from the top! Doing it tomorrow!

Thank you, this showed everything clearly in great detail, the issue I have, I can not get the fuel screw to turn.... I put a wristpin from a briggs on the allen and put a lineup bar in that, turned till i thought the wrench would snap and stopped, i did it with a wrench too, even in the opposit direciton, nothin. Edit: Oh I never had fuel when i took the triangle plate off the side.. I am runnin a 6.9 idi on a bus. It has never had an issue starting and even when i bumped it fuel never came out.

Thanks for taking the time to make that Video Eric ! Liked/Subscribed !

Hell yeah, man. Thank you. Clear, concise, helpful video.

Thank you so much! Best video detailing how to do this by far. I didn’t know about the side inspection port, thank you for pointing it out. Luckily I’m also replacing the intake on my 6.2 to a J-Code one so I think I’ll be able to kill 2 birds with one stone on this! Thanks for the tips on how to take it apart as well.

Thx you mister K!! 😉

Very nice videos.

looks you open and closed a lot times that type of diesel pump you are good on it!! great vedeo mate cheers from norway

Wow! I have been looking for months to find someone with a 6.5L diesel that matches what I see in our 6.5L diesel “pusher”… its a 95 and its in a FLEETWOOD FLAIR 32 foot Class A RV. I have wanted know how to adjust the fuel, as well as how to boost the turbo (since ours has a Mechanical wastegate actuator, instead of one with a vacuum pump… it came stock that way). Can you provide any info towards that endeavor? Your a good man for sharing my friend! Thank you!

Cool thanks

I need that pin and spring that is in the end where the timing gear goes I think it pushes on timing cover to push on end of pump if you have extra one will you please respond with info so I can buy from you. I thought mine was stuck in pump but must have jumped out after I removed pump I know it was in there but went to pick up pump and gone. Thank you

Is this the same process for a DB4 pump? Im needing more fuel out of my DB4 badly!

is there only one screw to adjust

Hi @Eric K, thanks for a very clear explanation. Can you possibly tell me what makes the engine go to full revs even though the throttle cable is disconnected. There was a video here somewhere that tried to explain that if the top cover you have taken off was placed incorrectly it would just rev full ball. I had my pump rebuilt but now that I have re installed it I just keep getting this problem. I have the same IP and any help on this would be appreciated. 🤔

You can do it from the side on a ford

Its the same allen screw. Just from different access. How sensitive is that screw? Should i turn it one millimeter or one turn. I have read that in rotary pumps turning up the fuel will also advance the timing at the same time. So overdoing it is bad.

I have a non turbo 6.2 in my 1985 1028 4wd dually its all stock from the military, how many turns clock wise do you recommend?

Bonjour Mr vous avez un tuto pour le démontage de la pompe ?cordialement Gilles de France 😉

"impossible to work on" a hummer. LOL. Try turning the fuel screw on an IDI van.

Can this adjustment be done on the computerized models also? Thanks

How do you know when it needs turning up

Does this increase flow rate, pressure or both?

Does anyone know about how much more HP this adds?

Hey I have a 6.2 with the 6.5 trubo stuff I turned my pump up 1/8th from stock and was told I can go one 1/8th more with the turbo? My motor came out of a 90ds 3/4 ton exstedded cab

What size allen wrench did you use?

My internals are not spinning when I turn the pump and it’s not pumping fuel

Mine don’t have that in it!

Just get to the point already 🙄 good video though