How to use a Non Creality webcam with Ender 3 V3

Рет қаралды 1,809

Күн бұрын

Here is a tutorial on how you can use a non-creality webcam with your ender 3 V3 KE, although this method will probably work with other creality machines that have klipper enabled.
Links to Root Printer
Helper Script: guilouz.github.io/Creality-He...
cd /usr/data
then
git clone github.com/Guilouz/Creality-H... /usr/data/helper-script
then
sh /usr/data/helper-script/helper.sh
Putty Download: www.chiark.greenend.org.uk/~s...
These are affiliate links and take you to Amazon
For a great 3D Printer - amzn.to/4bLt3A0
Nebula Camera - Monitor your prints remotely - amzn.to/4bLEt75
Tool Kit - amzn.to/45gx117
Here is a link to my Patreon if you would like to support the channel - / laylabaustralia
0:00 Enable Root Control
0:54 Installing Root Control
2:54 Installing Webcam Support

Пікірлер: 27

@pjakubsevicus 23 күн бұрын

Working 💪 thanks ❤

@LayerLabAustralia 23 күн бұрын

Woohoo 🎉

@bastidoresdagrafica 11 күн бұрын

Instalei o timelapse mas não apareceu e agora?

@Arthur-xu2iy Ай бұрын

Hello! I would like to ask if the a web cam like yours, will work in OrcaSlicer Device tab?

@LayerLabAustralia Ай бұрын

I don't have any experience with orca sorry 😞

@darrenneave Ай бұрын

Hey, very random issue I'm facing here. I have a nebula camera but for some reason the camera feed on creality cloud just isn't displaying. I can control the printer from an external internet source but the camera only works when I'm connected to the same WAN. I've already configured my router firewall to allow out/in for the printer, I've also setup port forwarding on port 8080 and 21 but still nothing. Any thoughts on what to try next would be appreciated.

@LayerLabAustralia Ай бұрын

Yeah, I have that same problem. I think there is something wrong with the service on Crealities side of things... A work around is to install the octoeverywhere service using the installer script I use in this video. It is a free service that allows you to monitor your camera feed outside your network. Should do the trick :)

@darrenneave Ай бұрын

@LayerLabAustralia thanks will give it a try this evening.

@antonioaraujo-gq3ol 25 күн бұрын

Would there be any modification to install an extruder with more colors on the ender 3 v3 ke? up up up

@LayerLabAustralia 25 күн бұрын

I've seen something called a 3d Chamelion which doesn't look overly user-friendly, and then there is the Co-Print multi-filament module, but it costs about the same as a Bamboo Lab A1 with multi-filament combo at around $770, so not worth it. At this stage, manual filament swap is about as good as you are going to get :(

@CoversByMaxx 3 күн бұрын

I was able to install everything but the two cameras I have don't work with the KE.

@LayerLabAustralia 2 күн бұрын

Aww dang. Why is the name of the webcams you are trying to use?

@namanhnguyen2982 19 күн бұрын

I followed all the steps correctly but after I typed reboot, the Mainsail web interface didn't show up. The printer went offline for a bit and it was active back again but nothing happened afterwards. Any ideas? I restarted the putty window several times but that didn't work either.

@LayerLabAustralia 18 күн бұрын

Damn sorry to hear you are having issues. Did you make sure your printer firmware is up to date? If so, you may have to try restoring to factory settings. Here is a link on how to do that :) guilouz.github.io/Creality-Helper-Script-Wiki/firmwares/reset-factory-settings/

@0ver1de89 5 күн бұрын

Could i use a laptop’s inbuilt camera? or a camera on an phone?

@LayerLabAustralia 5 күн бұрын

Possibly...although I have never tested with either of those so I can't say 100%. Give it a try!

@pointdex1070 Ай бұрын

hey,, my webcam is not showing up in octaveryehere dashboard

@LayerLabAustralia Ай бұрын

aww dang. have you installed the webcam support witht the install script I show in this video? What webcam do you have? What printer?

@lanceshipley7139 10 күн бұрын

It wants a username and password for my github, it then wont auth. Stuck on the first script...

@LayerLabAustralia 10 күн бұрын

hmm. what URL are you using? can you copy paste in here?

@lanceshipley7139 10 күн бұрын

go to the link next to helper script and there are instructions and a copy friendly text.

@CoversByMaxx 3 күн бұрын

@@lanceshipley7139 41 / 5.000 I have the same problem. asks me for username

@somethingsfishy2695 2 күн бұрын

This currently does not work, i dont know why but it just doesn't, dont even try. Suposedly the tools are not able to get some packages... But idk ill read the github comments

@LayerLabAustralia 2 күн бұрын

Sorry to hear you are having issues 😕 it does work, but I guess some webcams are not compatible either way you try and install them. Best to just get a creality webcam so you don't run into any compatibility problems.

@somethingsfishy2695 Күн бұрын

@@LayerLabAustralia The camera part does work, but the moonraker server in the printer does not work, as when its downloading its not able to get its dependencies, this problem is present for both option 2 and 3 of the install menu. Now i view the camera with the creality web interface, but i suppose the moonraker one was way better.