I would also suggest wearing a dust mask, particularly when grinding and mixing the wash. I've had some good luck with an angle grinder and diamond wheel. Not something to take on if you're unfamiliar with angle grinders though.

Thanks for the video. You can prevent taking chunks out of your kiln shelves by flipping your chisel over, so the bevelled edge is flat against the kiln shelf. This way it will lift the glaze up, instead of the chisel digging down into the shelf.

As I am a beginner potter, you and your videos have been so helpful to me. You are so informative and fun to listen to .. thank you!! 😊

Thank you for that informative video! The first kiln wash I did ... my consistency was way too thick and it cracked and now I see why! By the way your water jug is GORGEOUS!!! I LOVE it!!!! I love the shape, the way you cut the opening and the gorgeous glaze!!! You are super talented thank you for sharing so much!

Good that you show all the steps of ceramics. People don't realize all of the behind the scenes stuff (especially when they think your price is high). When chiseling, consider flipping it over. Bevel down chiseling will keep you from digging into the shelf as much. Keep up the good work. Cheers

I’m going to kiln wash my shelves right now. Thanks for the video. This will be my first firing in my kiln I got off of Offerup

Really enjoy your VDO. Fun and helpful. Love it. Thank you 😊

Thank you so much for talking about safety precautions! :))) Watching this again, now that I have a kiln....

Thank you. I have learned a lot from you. I am looking for a kiln to buy. I usually pay to get my pottery fired at a ceramic class. I like the automatic digital type instead of the manual. Do you have any brand to recommend. .

I swear every time I go "Just how do I try this" there is a video to help! Thank you!

Hi, I love your videos they help me out a lot and I would like to ask. Can I fire the shelfs with kiln wash along with my bisque/glaze pottery firing? With my pieces sitting atop of the shelfs. Will they not stick?

Yay, thank you and perfect timing too, I had a glaze go all run away bride on the club shelves 😭😭

Great video! This is definitely one of those things you do not want to overlook! Especially if you know you have runny glazes! (Speaking from experience!)

Thank you for all the info! I do have a question, how often should we do this?

Thanks a lot for the info. I covered them with kiln wash but it doesn't dry after 30 min. Did I do sth wrong?

This material can be used to restore the bottom of the kiln?

Funny entertaining and informative thanks for the info

I appreciate your tips!

I have perforated kiln shelves. Should I apply the kiln wash in the holes or try to keep them clean?!

Do you use a respirator doing this?

Is there a right side up for kiln shelves?

I mixed up too much wash, can I set the extra aside and use the remaining wash next time or do I need to make a fresh batch every time? Thanks!

I love your videos!

Have you tried using a chisel bevel down? That way it's positioned more to chip over the surface rather than chip into.

Have you every tried using a Dremel to remove glaze from your shelves? It seems like it might work faster but does it damage the shelf?

I love info about kilns

should I apply kiln wash to the floor of my new kiln?

hi my cone sometimes sticks can you tell me what to do.

Do you ever have any of the kiln wash on your shelves flake off after the first firing? I essentially do all of the steps you explain, however after the first fire, I usually notice many of my shelves have the kiln wash flaking off (almost as if it didn’t stick to the shelf once it dried). Some even flake before firing. I’ve tried changing the consistency, layering, and even cleaning/drying of my shelves. Not sure of the brand off the top of my head. Could it just be a substandard brand of kiln wash? Any info is appreciated.

Thanks for making this less scary!

Hey Donte! Love the videos Bro! but the chisel is used the other way with the bevel against your work..... Carpenters tip! .....hahahaha!

Thank you

I already have kiln wash on my selves and they are in need of some TLC. Should the old kiln wash be removed or just layer new on top? It seems like it may make the shelves get uneven to keep adding layers...

Donte, Great video. I was just curious if you have ever used kiln wash as just powder and what your thoughts would be on using just powder? One of my teachers used to just put a layer of powder down on the shelves and after a firing just picked out the pieces of glaze that dripped and was soaked up by the powder.

Thanks for making these videos! I've be procrastinating using my kiln because I've felt so in the dark on so many things and I didn't want burn my garage down because I didn't know what I was doing😬 Do you have a suggestion on how long should I wait after I apply kiln wash before I fire the shelves again?

After we kiln wash our shelves do we have to do a firing without goodies in the kiln?

Hi there do you have to do a kiln wash after every time you glaze?

Donte - if there were no drips on the shelf, how often would you add wash to your shelves?

Hi, am I suppose to put kiln wash in the kiln itself as well? On the floor and walls of it? Thank you if you reply.

I have a brand new kiln and brand new kiln shelves. I am confused about kiln shelves. I was told by a guy at the pottery store that I should flip my shelves using one side this firing and the opposite side next time to prevent shelf warping. But the kiln wash is kind of flaky. When I flip them won’t it land on my pots below and mess up my pots? I can’t find anybody else who says kiln shelves warp. What is the truth? Warp or not warp? Alternate sides or not?

Should or can this be done to the bottom floor of the Kiln as well?

I have a question. Aren’t you supposed to clean off the shelves from the dust by wiping down with a big sponge and water? I’ve been doing this but if I don’t have to it would save a ton of time.

Why is it important to chip off the glaze if its low or flush with the shelf? Can you not put kiln wash over it and be ok? Thanks!

Chipping glaze off of kiln shelves is so oddly satisfying in person

Should I put kiln wash on brand new shelves?

Alright, alright. I've seen a ton of this chisel stuff.. Although, I am obviously a relatively new potter (researching varieties of styles of basic functions of some new equipment and even types/varieties of my materials) .. I however, have found a great career and am very well-versed in many other traits and skills, primarily Carpentry and Masonry. The chisel here just seems obnoxiously bullish for something of more passive-ness and caressing. My only 'personal input' I wish I could suggest here, if I may please allow..is that these kiln shelfs are extremely fragile as-is.. the tensile strength and lack of moisture in them make them extremely brittle. Introducing any sort of cuts, breaks, or "impact" to that of the shelf (especially with sharp objects) is that you only result more "fracking" within the materials of the shelf itself. Having the tear outs and divets created as well, is to only become the "weakest spot" on the entire shelf. And in my ways of thinking, I would want to re-fill with kiln cement (giving time to cure) and sand smooth again, then cleaning, and re-applying the wash lastly.. Long story short.. even though you are extremely easy with the chisel in hand.. try to veer yourself from any sort of hard impacts, jolts, drops, scrapes, or cutouts in the structural integrity of the shelf and will yield you a much, much longer life span in your materials .. using more a passive approach, such as a 80 -> 120 -> 180 -> 220 grit sandpaper will be more of my personal approach after several readings and viewings) I really, really appreciate everything thing else you are doing, explaining, and teaching for everyone else here. You have exactly the right personality for teaching. Including, helping me. Thank you. New Subscriber, follower. 🤙 Pot On 🤘

How long should you wait prior to being able to fire them?

I just got a kiln. How do you know what size to buy

Why does my kiln wash go powder when it dries

I live in St Francis Bay. Can you send me by post one container with Kiln Wash. I have a Post Net close?

sun 11 sep 22

I didn't even know this existed

by opposite direction I guess he means 90 turn

A mask is necessary and sanding outside is best........

You are using the chisel wrong, the bevel should be down, use it to control the amount of "dig" you are getting and adjust as you go. good video tho, TY