How to Use Ryobi One+ 18V Cordless Drill

Рет қаралды 104,796

Күн бұрын

Ryobi cordless drill: amzn.to/3QEWlWc
Ryobi drill batteries: amzn.to/3AieHHg
In this video, I show you how to use the Ryobi One+ 18V cordless drill. I give you an easy tutorial of all the settings on the drill as well as a live demonstration of how to drill in wood.

Пікірлер: 79

@sjbolton3291 5 ай бұрын

Thanks, the included instruction manual with the drill was pretty much useless. This has helped a lot.👍

@AdrianaPrado-ij8pb 2 ай бұрын

Thank you so much for doing this! Being a female, I have always depending on my brother for drilling for me because I’ve always been intimidated by the drill. I needed to set up a new desk I bought and it said I needed a drill. My brother left a drill at my place for when I finally try it out and I did it! Wasn’t that bad after watching your video! I rarely do reviews too so thank you!

@therealsammieg Жыл бұрын

Thanks man, i searched ryobi could not find anything where they showed you the basics like this

@rnarizona9686 Жыл бұрын

Thanks for your excellent video. I am a retired general contractor, and purchased one of these for my wife, who is a professional artist, and uses it for framing her work. The manual that came with the drill, as well as what was available online from Ryobi was really quite awful. Thanks again, your video will save me a lot of time showing her how to operate this new drill.

@timnash6870 7 ай бұрын

If you are retired general contractor and you do not know how to use a basic drill and just because this is Ryobi. brand…. A drill is a drill no matter what brand you are buying…. and if you are, I retired general contractor and you need a video to learn how to use a drill again I would be looking for a new general contractor and losing your number because if you are the general contractor on the job site and need a video on using a cordless drill, you sir, are in the wrong line of work

@SpizzyP219 23 күн бұрын

I was going to say the same thing, but you saved me the time. This video gave me the information. I wish the manual had, plus some bonus tips. Thank you!

@kimmcguinness3837 6 ай бұрын

Thank you for a slow but write to the point video . Single Mom who paid a carpenter who never finished the job was able to finish because if you.

@bcotton 3 ай бұрын

This was so helpful, especially since I am a first time owner of a drill. Thank you so much!

@sweetcaus 8 ай бұрын

Thanks I was struggling last 2 hours. Finally found your video. Thank you

@yolandadarnell2608 7 ай бұрын

Thank you so much. I'm a new DIY'er and needed this tutorial.

@ThePakw 6 ай бұрын

Great little machine and great video. I've got one and I got it for the garden,great for winter when the soil is frozen. I'm a 68 year old woman 😊

@Luh.k9 4 ай бұрын

Thank you this works a lot man now I can set up my gaming set up 🔥🔥🔥

@shyamasaba2341 Жыл бұрын

Very clear teaching, you got very good teaching art, Thank you, and keep teaching.🎉🎉🎉 The world needs your talent.

@yewtoobbrute 7 ай бұрын

Wow, you answered all my questions, clearly and succinctly - not a wasted moment. Thank you.

@nettieseaberry633 6 күн бұрын

Thank you. Very helpful to understand my new purchase. About to install a closet shelving unit and wanted the basics explained. Much appreciated.

@ashafaghi 11 ай бұрын

I just bought one and quickly look for a KZfaq video and I found you. You helped me already, Thank you!!!

@aarondelgado3421 Жыл бұрын

Thank you for making this video. I found this video extremely helpful as a friend of mine got me a Ryobi One Plus drill as a wedding gift!

@beckymarie1123 Жыл бұрын

Thank you for this lesson!! I was doing it mostly wrong! Now I know the different speeds and torks and how to properly hold it

@whvtitiz Ай бұрын

Thanks! I feel confident to use my new ryobi drill now :) cheers mate!

@basedadri 11 ай бұрын

This was very helpful , thanks, i just got this tool today and was nervous about how to properly use it

@ImPerfektBeauty 7 ай бұрын

Hi! Man! Your video was exactly what I needed. Beginner here! I used all your tips for my first DIY project. THANK YOU!

@dianamccoy8848 4 ай бұрын

Much appreciated. First time to ever use a drill and I was lost until I saw your video. Opened up a whole new world!

@dbll827 9 ай бұрын

Thank you for a great tutorial for a beginner!

@fredsalfa Жыл бұрын

Thanks I just bought the drill and had no idea how to use it till I watched your video

@lovegsd9064 7 ай бұрын

I am 58 this is the first time I learned how to work a drill ! Thank you so much!!

@angelastinson6339 Жыл бұрын

Thank for helping this woman out!

@jemwhitedove2184 4 ай бұрын

Thanks mate from Australia. Just wanted to use a cleaning attachment and didn’t need to bother my hubby to show me ‘again’ how to use the bit clamp!😂

@them0ther Ай бұрын

Thank you! Excellent video.

@Cobraguy321 Жыл бұрын

Great clear and instructional video. Thanks

@loku252 3 ай бұрын

This is amazing! Thank you.

@shehanap4783 11 ай бұрын

OMG!!! Thank you this was so useful. I watched several videos just to figure out how to fit the something in to chuck and none were useful. Saving this for later 😁

@loralynntipton6131 Жыл бұрын

Thank you so much for the lesson. I'm 65 years old. This is the first drill I've ever purchased. I couldn't figure out how to put the bit in. So I pulled out the instructions, and it tells me the first step is to lock the trigger. Does it tell me how to lock the trigger? Nope. So, I go to Google to find a video to find out what to do. You don't even talk about locking the trigger, but you showed me how to tighten that thing down on the bit, and that's what I needed! Thank you!

@stephengarcia6350 7 ай бұрын

Excellent Video.

@yasenschannel2337 Жыл бұрын

Very informative video. Good job.

@danielaadair6783 28 күн бұрын

Thank you so much! You saved my life! ☺️🙏🏻

@glenmalesa8902 9 ай бұрын

Great video

@FLadd2024 8 ай бұрын

Thanks for this tutorial !!!

@MarciaJohanson 10 ай бұрын

Great video! Super helpful. Thanks!

@Fredengle 11 ай бұрын

thank you I am adding this video to a webpage I am making it has what my friend told me earlier today!

@kellythomas5871 10 ай бұрын

Thanks that was so helpful 😊

@leet.6149 Жыл бұрын

Thank you!! Well done!😊😊💜💜

@pmccservices Жыл бұрын

much better than the other video that pronounces it Ry-Bobby

@gladisbegaye9785 27 күн бұрын

Awesome 🤩 ty

@shericreates Жыл бұрын

I have a problem with the drills falling out. It happens especially when I am using the Kreg drill for pocket holes. I am getting arthritis in my hands which doesn’t help. But I learned a few things thank you!😊

@felinefriend22 Жыл бұрын

Thank you!

@helenlavette9991 Жыл бұрын

Thank you!!

@anitawaddell6417 3 ай бұрын

Can you use craftsman drill bits for Roy I drill and also what attachment of bit head would I use if I only need to drill a nail to hold a bracket for my kitchen blinds I do know should I use hex head or what drill bit for this task please help thank you

@Conraddc-tw9uf Ай бұрын

hope you have demos on metal

@tessmarielerum2993 Жыл бұрын

Thank you....

@kathyb-007 Жыл бұрын

Thanks so much!!!

@barbarab202 2 ай бұрын

So for occasional (like once or twice a year) use to drill holes and/or screw things together, this is the only tool I would need? Still confused when these are sold as sets with impact drivers.

@VernonMorris1 11 ай бұрын

Thank u!!!!

@EvaVas03 Жыл бұрын

Omg thank you

@RashpalBains 8 ай бұрын

Sir, when screwing my drill activates hammer action, how do I stop hammer function. Thank you RB

@anthonyocarroll5630 6 ай бұрын

What about video on metal drilling and fastening thankyou

@jcascarelli01cascarelli45 3 ай бұрын

what was the red contraption on the drill bit?

@jalynthomas858 Жыл бұрын

Thanks I needed help with this because no guy could help me sad 😭

@kathyb-007 Жыл бұрын

There are shorter bits for the screw/driver part. How do you insert those?

@albertosauce9872 Жыл бұрын

You can buy extenders that you insert into the chuck and then put the smaller bit into the other end of the extender

@Sodainspace 2 ай бұрын

I got this drill driver as part of the ryobi home kit. Ryobi is a Chinese company but they’re coming up with great modern DIY products where companies like Bosch are outdated. My only complaint is they should work on better video tutorials for their products and also I wish this drill had a slow mode for when using the screw driver

@mannykhan7752 3 күн бұрын

Did bro just use an ironing board as a workbench? Neat

@saggatbungin9226 Жыл бұрын

How to open head driil that one

@wakinglife7065 3 ай бұрын

Thank you so much! You’re the Papa we all needed 🫡

@peteflynn3923 4 ай бұрын

I recently bought this drill. My only complaint is that when I stop drilling or screwing, it spits out the drill or driver. Now I am searching for a bit in whatever is underfoot or under my ladder. Sometimes I don’t find it. This is a real PITA, and I have tried adjusting the chuck settings to no avail!

@uzidatruth Жыл бұрын

YOU JUST SAVED ME FROM CHUCKING MINE BACK TO THE STORE. pun intended

@jefferyglass5269 2 ай бұрын

I can't figure out why i'm unable to drill screws, the bit just spins , and I make sure its the right bit size, because i'm able to drive it manually. Can anyone help???

@stephaniem895 Жыл бұрын

They need to do a better job designing these tools for people with small hands. My hand isn’t big enough to press both sides to pull battery off. I have to awkwardly hold it and use both hands.

@facingfacts7830 Жыл бұрын

Just bought one yesterday and the chuck only spins closed, won't turn to the R! HELP...or did I buy a broken drill?

@reneedefrance8969 Жыл бұрын

I thought the same thing until watching this. I had to force turn mine and the chuck finally came out.

@evolveyourself9518 Жыл бұрын

My Ryobi didn't come with drill bits? So, each bit has to be bought separately???

@tgeorge9677 Жыл бұрын

Hi. You can actually purchase a kit that includes different types of bits in it from Home Depot.

@evolveyourself9518 Жыл бұрын

Strange that parents no longer teach their children anything. We have to come to KZfaq to figure out how to use a drill.

@megandd1797 3 ай бұрын

how do you tell which Ryobi is the drill and which one is the driver? Why don't they label them?!

@thefinalcuthomeimprovement8197 2 ай бұрын

The drill is bigger, has the adjustable speeds, and the adjustable tooth chuck on the front end that adjust by spinning it. The driver is generally more compact and only accepts the hex shaped bit shanks.

@darneittajones8338 Жыл бұрын

Just bought my first drill and was clueless how to use it safely.

@kurxxedluvsyou Жыл бұрын

I'm a 12 yr learning how 😅

@SSpees Жыл бұрын

the drone on of ADs on all these videos is having a negative impact. Why buy a product you are sick of seeing over and over and over again and again..Ever hear of the reverse impact of ADS?

@timnash6870 7 ай бұрын

I clicked on this video not to see how to use a drill.. I clicked on this video because I was bored saw this video, wondering what you had to say that it is very funny 98% of people that are buying drills already know how to use a drill…