I’m an aircraft maintenance technician for a major airline company and have found this stuff works great when reattaching a wing to a passenger plane that still has some gaps that needs filling.

Great putty. It even worked to fill in the hole in my soul.

For me, the best thing about your putty and wash is the lack of toxicity and indifference to health. I don't cough, my skin doesn't suffer, but I like acrylic products. More over, there is no problem with cleaning tools and the desk

I've been using this stuff all wrong. Super glad I found this video.

Great detailed video with lovely music. There's this little shop in my town where I buy all my Vallejo products. Even the buying is a joy, visiting the shop, talking to the owner and choosing the colors. Thanks guys, keep up the good work.

This is currently my favourite filler. Easy to use and quick clean up. Some nice uses there that i had not considered.

The ideas made this video great, the music sold this video.

I use this, but did not know it was this versatile. Good stuff!

Thank you for this amazing product! Burned a dent in a PLA 3d printed plastic model with a glue gun, and this fixed it.

Gosh I just love how Vallejo putty comes out in a thin nozzle! Also great vid it was very helpful!😃

6:49 cannot believe I had never thought of that before! Great video thanks

Great stuff. I've started to paint Warhammer 40k models and this stuff is great. Easy to use and clean up.

Really love this putty. Great work vallejo!!

Love Vallejo products. and this music makes me want to start on another model.

Great video, very informative!

For decades I’ve been looking for a better filler putty that’s more viscous and easier to apply and it looks like I just found it here!

i've been pushing this product all over my twitter and to fellow modlers, this is a life saver if your scribing and make a mistake you wish to correct, or want to til fill gaps and make a kit look less 'busy'.. and it's cheap!

Used it for three months now, It even works for weld seams, let dry for 5 minutes before pressing weld pattern into seam with back of a hobby knife, or scalpel. Many thanks Vallejo.

Really good putty. Tho I've watched the video atleast 20 times for the music lol so relaxing

fantastic video. bravo.

Great Video,will try the putty

really great , simply to use and so better than the products type Mr surfacer

Watched this last night eny future soviet tanks will get the treatment thank for the information and emagination

⭐️very helpful⭐️ Thankyou 👍

I am working on a gunpla, and I am giving a try to this, so far, so good, fills the gaps and holes very very good! for small places is perfect! I am already in love!

I love the putty that much I even bought another 3 tubes off bna model world here in australia

good video and good product

Bought it, tried it, love it!

Nice techniques bro, keep it up

Oh wow you can even water it and use as a texture. Now I know what to put on my bases as mud.

Thank you , for this video👍

Just bought this stuff to fill in some gaps from my 3D printed scale models. Initially I was just wondering if I needed gloves, but this video game me a lot of ideas :) thanks

I love this brand

I have some being shipped for my Sherman cast parts, timely video thanks.

I love this putty because simply apply it to said gap, take a damp cotton bud /Q tip) and run it down the line and boom instant cleanup and your gap is filled,no need for sanding or anything it’s by far my favourite.

It is not good for sanding thick layers, maybe here in the video there are no problems cause the layer is extra thin, but if you use it like tamiya putty for example on scale model cars, and plan to sand it later you fill feel the rubbery stuff just tear apart and coming off like a chewing gum.

wow no se me había ocurrido lo de la textura

I love this a putty.

Excelente produto, dá para utilizar para muitos efeitos. Excelente demonstração , grande abraço José Brito , sempre uma referência para mim. Cumprimentos do Porto - Portugal.

Thanks for this video. I was doing it wrong.

:/ Looks good and I certainly like the way it can be worked with a brush, but how quickly does the nozzle get jammed up with dry putty?

Ce produit est vraiment efficace. Belle découverte

Great video of José Brito, (aka Smurfie hands)...... ;)

Thanks 👍

Nice Harold Budd-esque track but you should really emphasize it is not a heavy duty Squadron putty type of deal somewhere in your advertising.

Quizás habría estado bien añadir la imprimación a las figuras como último paso de cada ejemplo, para que viésemos como queda una vez imprimada

You say it dries in around 30 minutes (depending on thickness I suppose) so can I assume it is ready to be painted right away also? How is it at filling larger gaps?

Question - is ppe like a mask required if you want to remove excess of the putty through sanding? I ask because of the mention of resin on the tube

thats cool and all, but can it be used for zimmerit as well?

Is it shrink when painted with lacquer paint?

This guy's a pro though .

Hi Vallejo, I have the dropper bottle version of this. Am I right in thinking the putty is the same in both the dropper and the nozzled tube (shown in this vid)? Thanks.

What was that scrapper that you used to get the putty in the cracks?

does this stuff bleed or ghost through top coat?if not im so getting a batch of this.. however with tamiya kits and other well made and well cast kits putty is less and less required but im some cases it's necessary looks good.

This music sounds like something off of the "Against All Odds" soundtrack. The part where they are free-diving.

Super comme produit

i want to use this to fill in some panel lining on gunpla and planned to paint with lacquer based paints. will this hold up to the paint since its acrylic?

Looks like great stuff. I will half to buy some and try it out on a 1/600 scale revell original series uss enterprise model kit as it comes with engraved panel lines, the original enterprise is not suppose to have panel lines so this stuff will probably work EXCELLENT to fill in those lines and make my model realistic.

Looks great how much?

how runny is this stuff? I have some resin casted miniature bases but they are lacking large enough areas that are flat and smooth for me to effectively glue my miniatures to, could I put this stuff on the surface and smooth it to fill in any nooks, crannies, or elevate the surrounding surface to the raised bits to make level flat patches?

My favourite filler.

Can I use it to make Zimmerit with the Zimmeritroller of AFV-Club?

I am looking for a good putty and this one looks as if it may be the one,Squadron have messed up on the formulae on their once excellent product and I need to find an alternative quickly.

I find that it shrinks and falls out of gaps and seams. It lacks a good bond with the styrene, and crumbles away. It is easy to apply and cleans up well, though. I mostly use it on figures where the seams are short and not so obvious.

Es buen producto alomejor lo compro

Estoy dando mis primeros pasos con Vallejo Putty, para rellenar gaps en aviones a escala. Quisiera consultar. cual es el tiempo recomendado de secado antes de lijar? Ya que en las pruebas que he hecho, al lijar la masilla aplicada se pela o bien se "arranca".

I wonder what sized wire that was on those handles..

Can the putty be used on metal models?

1:01 thanks 👍👍

A great putty and one I’ve been using for a while. Btw can anyone assist with the music used here? I love it and would like to buy/download it. Thanks.

My car key is black plastic, this fills the damaged hole but what to use to color?

I use silicon sculpting tools instead of brushes to spread the putty.

how long do you wait to use the water and brush as thinner? or do you do it immediately?

Высыхает в вязкую поверхность, абсолютно не шкурится. Как будто под видом шпаклевки продают обычную акриловую краску.

Can anyone please mention what kind of sandpaper grits are good for sanding this stuff down when doing seams. Thanks allot :)

Good product; I use it regularly for my aircraft models. One thing needs to be pointed at: the demonstration with the tank turret is misleading: the putty it's not sandable. Other than that, great video tutorial!

Q. Does it shrink at all once dry?

I'll try this someday. It looks like it's curing or clumping while brushing for gap filling. What is the work time for Vallejo Putty? I'm currently using Apoxie sculpt. Water soluble Epoxy clay no shrinkage. 1-3 hours work time

what if the part I'm trying to fill isn't going to be painted or is very tiny? can I mix some model color acrylic paint with the putty prior to applying it to avoid painting the whole part?

so, the putty can be thinned with water. so, does watter affect it once dry?

How long till it is "well dry"? There are no drying times on the packet

Por favor hacer un vídeo de el nuevo plastic putty el de botecillo

I have used it and I wouldn't recommend it if you want to fill gaps in your model as its main disadvantage is that it srinks.It is good for texturing.

Here's an odd question, can I use it to fill small molds? I had some rifles that I wanted to fix so I took one of the few good ones, made a blue stuff mold of it, and am having trouble with regular green stuff. Since this is an alternative to liquid green stuff, I wasn't sure if I could just fill the mold with this and have it work?

Wonder if this putty is without any solvent smell since it can be thinned with water. The current filler I use for cast texturing requiers me to use a filtermask and if I have to thin it I need a solvent witch also requires me to use my filtermask. Hope it is odorless then I will defenitly buy this after im done with my current filler.

Sirve esta masilla y/o tenéis otra en el mercado para aplicar zimmerit?

so I picked up a tube of this putty not too long ago and I don't know if I got a bad batch or not. It didn't dry "hard" like with the Mr. Putty that I normally use, it was similar consistency to rubber cement or like trying to sand a rubber band. I applied it exactly like in the above video (straight from the tube and thinned with water) so I don't know what the deal is...any ideas or thoughts??

The question that is asked in every Vallejo video...what is this music?

Does this Plastic Putty also work like a (super)glue to join plastic/styrene together?

Genial video, justo es lo que estaba buscando, donde puedo comprarlo??? saludos

Is it safe to use a lacquer based primer over this?

No entiendo porqué no ponéis texto en español. ¿ Hay otro canal en español con estos vídeos ?

Could I use Vallejo plastic putty on foam / styrofoam / Styrodur? Will it "eat" into the foam?

I want add korean subtitle vallejo tutorial video. Please allow me to add subtitles.

can this Vallejo plastic putty actually also be used to imitate weld seams? in scale 1.16 !!

Una imagen vale más que mil palabras pero seguimos sin subtitular lo en español

Der Mist ist bei mir drei tagen immer noch wie Gummi, vallejo hat echt nachgelesen und ich war ein echter Fan von denn. Hab aber schon ein besseren gefunden mit Farben und Zubehör.

I've tried this putty, after 3 days its still soft like rubber, not hard at all, and no way I could sand it. And I didnt thin it.

What happened in the end? Music put me to sleep.

I let it dry for 30 minutes, but it's not really solid, rather like it's made out of gum, and when I sand it, it just sticks to the sanding paper, and comes off. Do I have to add water before it dries?