THANK YOU! Not only do I have a broken spark plug, but I broke a wire like this and I didn’t want to have to buy another set of wires, too... This was awesome, thank you for helping me out!

Just did this, this morning! Thank you!!! This video not only satisfied my curiosity but saved MY REAR LOL. I HAVE the money just not ready to spend on it this yet. The wires are new and I was taking the manifold off.

Glad I searched this. I just replaced the plugs wires months ago. So I am ready to replace the plugs I pulled out the wire it came loose. So I'm glad I found your video. Thks

Fixed mine using this method. Thank you very much! Was gonna buy a new set, but this saved me!

This is EXACTLY what just happened to me. I already put 2 and 2 together and fixed it but I support this video bc other people may not be able to improvise like this. Thanks!

Your videos are really informative and intended to help people save time and money. Good job

Thanks man, Ive had a set in my car for 2 months bought them new and 3 of them just did this when I was checking the spark plug cables! So glad I came across your video!

EXCELLENT DIY, just had this happen to me, saved my day, peace!

U keep working on One of The easiest to work on Vehicle's of the 90's and beyond, some what modern but no where near MODERN at the same time........................

Great. Saved me $89 plus tax and shipping! easy for follow and the grease trick worked great. Thank You!

This was very informative and actually an entertaining watch. Thanks!!!

Murphy's law dictates the last plug I replace would do this 😥 thank you so much for saving us! Didn't want to have to replace our already newer wires!!

Thanks a lot! Now I can confidently fix mine now.

Thanks for the video.Applied it to riding mower and it worked.Saved me some money and time.

Thanks for posting this. I fixed my sparkplug wire thanks to your video.

Just did the exact same thing to the exact same wires! Thank you!

Thanks so much! I'm used to stripping and soldering wires but that is not what is needed here! That conductor wire is so tiny you can't strip it out of the black covering. My plug had pulled off my coil wire (copper plug sticking in the coil) and it's a prestolite on an old boat and the auto shops don't seem to carry it. Mine broke just like yours, leaving some black silicone inside the copper part. Your video saved me! I just cut more insulation off the big outside and folded back the tiny black covered wire under the connector like you showed. Got it clamped back together. It's running great.

i do the same thing but i use basic wire crimpers. they usually have a spark plug wire crimper built in

Pretty good explanation tbh so far the best I could find on yt

Awesome video! Thank god the envoy has coils :D

This was very useful to me. Thank you!

Your videos are good !

This worked for me! Thanks

Also to find out if plug wires are good check the resistance.(OHMS) ... Great Fix. 👍

You saved me a trip to the parts store. Thank you

thankyou very much for the tip on the die electric super lube grease, i need it for fuses and seems good for just shining up the motor protection maybe similar to silicone spray which cost too much now for detailing use...

Great video, helped me out, had to do this today.

Awesome fix. Had to do it on my msd wires. Thnx

Thank you! You just saved me!!

very nice video... Thank You so much for making this... i had a no start condition so i check for spark and i had non. i removed the coil and cleaned mounting surfaces. and regap coil. still no spark found end of coil wire at spark plug faulty connection could not believe it, trimmed end off recheck and now it working great, just crazy problem... yep it was the end of the wire at the plug... who would of thought no spark problem is at the end of the wire at the spark plug connection ???

Good stuff ! Helpful⚒️👍

4 of mine just did the exact same thing on my suburban lol thanks for this

Thank you! I have the same problem!

good job I have a lot of spark plug wires, I will fix it by same way.

I 👍ed because I enjoyed it 'at least just a little bit'! I've spent a coupla days trying to fix a strimmer. Seen all the videos. Turns out there is something wrong inside the 6" ( ?) of ht wire. It's moulded into the coil, which are cheap enough but a) the principle of the thing, b) month by slowboat from China. Looking at doing a splice but didn't realise how THIN the one strand of wire is inside, and DELICATE! Even your one has its own private insulation!

Thank you for sharing this!

Thanks for this video. I personally think this fix will last a lifetime, unless your try to take out the spark plug again then you might disturb the plug wire again. Otherwise I think it's a pretty good and solid fix.

Fixed my lead and saved money, thanks!

Why do I get the feeling you were rough with the last one you checked, just so you could cover this topic? lol Just kidding, top notch content as always. Chuck

My Jeep Wrangler #6 spark plug wire kept popping off whenever I'd hit a good bump. Pulled over on the freeway as I was half way to picking up my wife from the airport. Took Super Glue I had in the glove box and put a few drops around the rubber boot and popped it back on the spark plug. Been running good for a week, lol. I did order a new set of wires and have the tools in the Jeep to fix it should it break while driving and of course have a roll of Duck Tape...... Thank you for the informative video, added a pair of needle nose to my emergency kit, lol

Thank you! This has saved me about £50!

Done this many times in the past minus the grease. One time a repair shop claimed they had to replace a bad plug wire and replaced it with one with a plastic boot that ended up cracking my spark plug in half. Had to buy a new spark plug and I replaced their plastic boot with a rubber one from an old set. Yeah they replaced a wire from an almost brand new set.

Still get the Aceel ceramic boot wires there completely worth it

Thanks for this! Didn’t wanna buy a new set of wires!

I like it 👍👍

Thank you!

really awesome dude ! i have not seen that in a while. and that stuff actually happens. awesome video !!

Love the acting at the start of the video we've all been there 😂

This video just saved me from spending the money I don't have thank goodness

Just happened to me an hour ago...luckily my wires had the imprint and I could clamp them how they were truck ran as it did prior...I stumbled upon this video to see if Itll be okay or if it was a temp or if it was really that straight forward and easy to fix....on a scale of easy to easiest, I'd give this the easiest thing I had to fix

Thank You!!!!

Good fix Bro! Thanks for sharing

Thank YOU!!

You can buy one AC Delco spark plug wire from Advance Auto too.

You sabe my day

Good job. I quit a job today beacuse i pulled the wireand it broke. Then i saw your video.

I thought I was doomed I love you for this. Their like $100 just for the set of wires it would be nice if they sold individually

Nice fix jimmy i have learned alot with your videos 👍👍

Your my hero

When your on tight budget it great solution get by but if going do spark plugs might as well do plug wires as there usually what ages the worst and cause misfire in first place unless new enough to where most vehicles use coil pack to spark plug now

Thanks

Thank you I broke 2 on my ute and I was not spending 50 bucks on a new set

Can I still use the spark wire by plugging it back in the hole with the metal piece still on the end of the spark plug?

Holy hand bouncing, Batman! Thanks for this, you just saved me $50.

Put the lube on the wire next time...not my first Rodeo..Cheers 🍻🍻🍻🇺🇸🇺🇸🇺🇸

Nice boss.

awesome vid , probably it'll work for my motorcycle , i made the mistake twice, technically a 12 v whatever should be ok BUT it fries the starter solenoid i can get used or aftermarket cheap, so next i have old carbs i clean over and over , this time spotless mostly BUT i find two funky spark plug wires (big 4 cylinder) so i realize the messed up running has been a short and not running probably the both wires same time but i think it'll get me rolling fast/lol i saw the vid a while back but i went legally blind a spell , very depressing and aging i guess anyway i got projects all over now i can see but i'm out of shape from the ordeal still , it's been awesome though i had faith and learned alot about the temp state but man imagine i'm 40's , 75-80 year olds pull rvs, boats still i felt old a moment /ranting thanks for the vid i'll try to update if it works for me, i think i have to buy two entire coils used to get the boot and maybe i should study aftermarket , it's good to learn to test the coils too (i'd need to look up ...i have a pilot valve driving me nuts , the idle jet breaks and the carbs are as much as a lower mileage motor but with no carb rack or airbox needed for correct performance if i went back from slide valves ......

Do a show on cross threaded plugs!

Mines is still in my wire set. Looks like when I pulled it off it got stuck a bit so now it’s like at the tip of the wire instead of all the way inside.

Mines broke at the bottom behind tire.loud ticking.Wat to do

Great VEDIO !!!!....

What about the curved spark plug boots? Any way to fix those?

the only time this has happened to me when I got a truck where the person just replaced the spark plugs and wires with copper plugs instead of double Platinum two weeks before I bought it with no grease in the spark plugs boot. I just decided to go ahead and replace the cables. I rather would not have taken a chance.

Kuya pano po ayusin yung spark plug ko nabubunot ng kanya o natatanggal minsan sa kalye tas tumitigil ako.. Sa mio soul i 125 po

I pulled the spark plug wire off of the boot. When I took the boot off of the spark plug, the crimp was still in boot. Can I fix that?

What do yall do if the boot wont stay on the plug?

Make sure the shortened cable still reaches the plug

Yay not a click bait video.

This applies to lawnmowers too!

What do I do if I lose the little connecter?

Ive built spark plug wires for a old tractor i bought new wires but had to put ends on them and cut them to length it is possible to fix and make custom ones

What are the symptoms if u ride with 2 that are broken

Lol i just shoved it back in the boot

Great! Just saved $60 and more work.. Now more $$ for Beer, Beer, Beer... I love Beer...

I've had luck spinning the boot to crack it free then I pull the boot and wire at the same time both hands

Why would it fail again? You did the same thing they do at the factory.

Did this to my ford 2000 tractor 1967

Cant you put some solder on that wire to the crimp after crimping, as a justin case thing?

I don't understand how a cased wire makes contact with the metal couplink..tried soldering the wire, it just melts. Weird space stuff I reckon, but I crimped it back together and will try it out on the buddy's car

Can you shorten the boot???

Alittle dialectic grease goes along way😀

What if the tiny wire has broken off?

I've had that problem with the same spark. Plug wire same truck same everything

3:56 heard that one before

I need help! The connector is stuck on the spark plug and I cant remove it or remove the spark plug because the socket doesn't fit on the spark plug. Any ideas?

Any sugggestions for divorcing the crimp from the plug? They’re not rusted or corroded but they are freaking married for eternity haha. I have the spark plug pliers, have tried twisting the wire and the spring coil, I’ve tried turning it in a wide circle, but so far the only way to get it is to eventually tear the rubber part, pull the coil, then pull off the crimp from the plug

Keep your hands still! You have the shakes!!!!! Too much caffeine?

Hey Jimmy what's up you didn't post videos for a long time

How did you get the spark plug out tho...

My 1996 range decided to do this to me haha