How to Wire 3 Prong led Rocker Switch

Рет қаралды 71,686

Жыл бұрын

How to Wire 3 Prong led Rocker Switch
Switch amzn.to/3T4n1kF
Wire amzn.to/3CnabGX
Fuse amzn.to/435IFdl In the video i said 15 i meant 10
Light amzn.to/3T0VEYX
Thanks for watching!
Instagram here / ripsky777
next video here • How To Wire ON OFF Swi...
Subscribe here kzfaq.info?sub_confir...

Пікірлер: 39

@Ripsky Жыл бұрын

In the video i said 15 i meant 10

@greghudson1489 Ай бұрын

THANK YOU!! I'm an electrical idiot. You are a rare person who shows in plain example how to wire these switches.

@whitetrashandhellbound6905 2 ай бұрын

Just ordered some Toggle Switches for my truck... Switch For Subs, Switch for Cabin LEDs and Dwitch for Light Bars. The switches are supposed to shine Blue when turned on but I didn't understand the Three Prong situation... now that you played it out it makes sense, pretty basic. Kind of feel like an idiot at this point. I appreciate you making the video man, I should have known this info though lol 🙄. Thanks! 🤟🇨🇦

@danielwebb5595 Жыл бұрын

Great Video. I have watched several on this subject and this is the best by far. I did not know the last wire was optional and only was there for the switch light.

@user-cr6ki4qs4y Ай бұрын

Thanks for keeping it simple and easy to understand.

@jwatt9570 8 ай бұрын

Thank you. So simply explained.

@jaycubem 3 ай бұрын

Perfect video! I have the exact switch and am putting a 6” light bar on my son’s power wheels Jeep rubicon lol. Rock lights too but this was too perfect lol. Thanks man!

@philliprobertson8869 Жыл бұрын

Thank you. This video is very straight to the point and well explained.

@210bydesign9 6 ай бұрын

Simple but clean and straight forward thank you

@deckboat21 8 ай бұрын

Exactly what I was looking for Thank you.

@hirow08 4 ай бұрын

Needed this. Thanks!

@nunzio2011 25 күн бұрын

Nice l’y donne and explained

@GBooneoh 4 ай бұрын

im subbing because u used a fuse!

@Ripsky 4 ай бұрын

lolol thanks

@JuskoLord247 4 ай бұрын

I have a led to setup my car but I noticed that other videos have a relay. What’s the relay for? This video didn’t need a relay.

@Ripsky 4 ай бұрын

this led light is only about 20 watts anything over like a 35 or 40 watt light i would probably use a relay. a relay will protect your wiring and switch from overheating and possibly catching on fire. if you do any wiring and you notice your wires getting really hot your either going to need a lot thicker wire or a relay.

@raulpadilla782 Жыл бұрын

Great Vid, thanks. Saludos de México. You have any video installing 2 Led bars to that same switch?

@conky6719 Жыл бұрын

The best video

@Dominoid86 6 ай бұрын

Ty soooooooo much man

@andrewm.4168 Ай бұрын

My switch has three contacts on the back but theyre not labeled. Is there a way to know which is what? Thanks for the video.

@This0is0pointless 12 күн бұрын

What if your switching the ground not the +, no way to get the light on the toggle to work?

@FatherTed233 Жыл бұрын

Can you use a rocker switch with a 12v rf switch? So you can turn on off with remote and on off from cab?

@EliasHernandez-ov2jz 9 ай бұрын

I’m new to working with electrical stuff so forgive me for asking but if I wanted to run some auxiliary lights in a car and I wanted to add a switch to turn them off and on could I just add a switch to a fuse tap then wire the lights to the switch ? I’m trying to watch videos to see if that’s what people are doing but I’m only seeing videos about people shooting wires from the switch straight to the battery? Any help would be greatly appreciated. Thanks brother 🤙🏽

@DarkKent Жыл бұрын

Great vid. Very informative. Is there any way to wire it to only close a circuit without sending power to the circuit. While retaining the indicator light? Or is there a switch with led indicator the doesn’t send power through the connected circuit??? Help pleasssssse

@chris-topher 7 ай бұрын

@DarkKent did you get your answer somewhere else? Im struggling with similar. Im trying to use this same 3 pole switch on the ground side of a circuit. (similar to how one might install a 2 pole switch that doesn't have an led indicator). I too want the led illuminated when switch is on (when the circuit is live). I tried using the supply & ground poles on the switch which did illuminate the led, but did not fire up my device (a relay). Then I tried using the supply & load poles on the switch which did trip the relay but did not illuminate the led. Also tried grounding both of the load & ground poles on the switch with mixed results. Not sure what is going on there. If I cant resolve this easily, Ill have to rewire the whole thing with switch on the hot side of the relay.

@DarkKent 7 ай бұрын

@@chris-topher I gave up and got a different switch that works as intended

@chris-topher 7 ай бұрын

@@DarkKent Thanks for the reply. I spent so much time trying to understand why it wont work on the ground side, and I gave up on that. I've learned now tho, that the 3 pole switch needs to be wired on the positive side of your device. I spent nearly an entire day rewiring it to get it to light up lol.

@tonytowers5863 Жыл бұрын

thats the same type of switch on my bike , I thought it was called a toggle switch,😅

@AscheAkonji 10 ай бұрын

Would you be able to make a video on how to wire a momentary button through a 15a fuse to a 12v battery and powering something like a lamp? 😭 a lot to ask for but I’m so lost trying to do a school project (I didn’t choose this course & ion know anything about it)

@marquecook6416 8 ай бұрын

Does that ground have to be on the negative part of the battery or can it just be grounded?

@Ripsky 8 ай бұрын

it can just be grounded

@cooperjackson661 4 ай бұрын

Can i do this for a 48v lithium battery that powers my Razor electric bike? I want to make a power on off switch

@johannjohann6523 Жыл бұрын

uh so not for a car application, unless you're using a battery pack? or you want to run a wire through the firewall and all the way to the car battery.for a simple LED light. there has to be a wire under the dash you can use ?? that's what I was hoiping for anyway.

@Ripsky Жыл бұрын

for the led light you can attach it to any ground.