You explain things perfectly and your speed of talking/explaining is outstanding! I will owe you for a big thanks when I finish my solar project!

Wow! Glad I saw this. I am building to your diagram from before you added this to your designs. THANK YOU for your diligence with code requiements!!!!!!!!

Just came to your channel. This stuff is golden! What an education. I love that you are covering things is such a step by step manner and that you are giving the reasons for the safety regs. Thank you.

Seen quite a few of your video’s, and you put so much detail into a easy to understand presentation, and such a big help as I slowly build my camper electric’s,you do a awesome job thanks steve 👌

Thank goodness this channel exists! Thank you!!!!

awesome video. Extremely helpful! I have a 90v 40a array and this really help me

Hello Nate, Thanks for making all of these videos! The information is extremely helpful! Just wondering if you were ever considered making some videos for a setup much less complicated and on a smaller scale. Like an over-landing vehicle (Jeep) with a dual battery setup under the hood and 200W solar just to power a small propane heater and fridge? Something small enough that wouldn't require an inverter maybe? Thanks again and love the videos!

Another awesome, clear, helpful and right on the money video. Thank you. YOU ARE THE MAN!

Nate, I've been watching your videos for a while now. Your video production and associated blogs are of the highest quality and so professional, very impressive. Thanks so much for all the information you share. You have a great teaching style that seems to come so naturally to you. I don't personally build van's or campers but have used your helpful tutorials to build a solar shed and an off grid system for my Ham radio shack/office. 73 de W1SMM

Thanks for being clear , because it’s confusing. Better to be simple in this subject 👍👍

Thank you. Helped me understand the primary purpose of the circuit breaker: Switch off power from the panels.

I love your channel.Ican go back and watch these videos multiple times if I need to, along with all the other ones.

You are such an excellent teacher. So step by step logical instructions.

Great information. Very direct. Good job. Thank you.

I have found your videos just in time. Im installing solar on my yacht, just as on your camper /RV. Your videos are very educational. I now can proceed with my installation. Dont worry I have an electrician friend helping me..

Perfect timing! My dual pole disconnect arrived last week and I will be installing it this coming week... This helps a lot! Thank you!

legend bro - setting up solar at my shop cos I dont have a fixed building for city power - your vids are superbly helpful!

Very timely! I actually just asked a question on one of your wiring diagram blog posts (although I couldn't get the question to actually post) a couple days ago wondering why the ampacity rating was so high on the breaker. Now I have my answer. Good stuff.

Thank you , very good demonstration.

Brilliant detail and really well explained! Thanks!!

Thank you. Purchased a new SSC and 32A breaker for our boat and subsequently realized that the breaker wiring could be “omni directional”. Now I’m good to go. Nicely done video.

Excellent video. Things are covered that I have asked about and never really got good answers although most you think you know why (it is good to have someone backup your theories, lol). Some of my thoughts/questions that he answered: why you cannot use the 48 volt DC switches, why you cannot use an AC switch on DC, why you should use 2 wires instead of the usual 1 on a DC switch, etc.

Thank you for pointing out and explaining the NEC code for this. I'm thinking my combiner box already meets this, but since those are outside I'm going to install a box similar to what you demonstrated with right next to my inverter for convenience. I'm also going to put a label regarding the NEC code on it as a reminder. Your videos are all so clear and purposeful, thank you.

Just started my journey on the campervan trail and I know nothing about electricity and wiring and all this and I apparently said something that surprised my grandpa that is an old naval electrical engineer so I must be learning something. Thanks for the great vids can't wait to learn more. Doing a box truck conversion on an old 1974 dodge 3/4 ton, my very first conversion project! So exciting

Awesome video. I'm building an RV and was just at the stage of adding the solar disconnect. Learned a LOT with this and saved me a lot of hassle down the road, and possibly a disaster as well as I was about to use one of the switches you advised to never use here.

Leaned a lot from all your videos. Thanks. One tip I learned though (looks like you may have also, but omitted it in the video), once you cut and have run the wires into the box, remove the breaker for easier access to install the wires in the breaker. Then, you can push the wires back out and reinstall the breaker. 👍

I brought a solar kit here in the uk and it came with the breaker you said not to use, since replaced with a double pole unit. Glad I watched this and Thankyou 👍

Thanks Teacher!!!! All your videos are super helpful! I am learning slowly but surely! )))

Professional done videos. Good Job!

Thanks Nate, your brilliant 👍

Hi Nate, your videos are super good. I am learning a every time I watch your videos. Keep up the good work

This is a sweet video as always. Nice clean install too. For my trailer, however, my 2x panels in series will plug into an SAE input jack on the outside of the rig so assume I am ok just pulling the panel cable connection from there.

Excellent, I almost purchased 30 amp breakers. Thanks!

Hi Nate, very helpful video as usual. Most other video simply recommend one of the other breakers that you suggested not be used due to voltage issues which I appreciate. One question I had was where do you get that black backer board for install? I dont see it on your parts list. Thanks

Very helpful, I installed this in my new system

Thanks for what you do👍

I like that cable duct, very flexible for wire entry

Thanks so much for your solar videos

Brilliant explanation!

... great tips as always ... and in 0.75-speed an old german guy can follow along as well ... ;-)

Thanks I like the code references. Cheers

Very helpful! Thank you!

I have a 400w solar in series and a 40amp mppt. Do I have to used a dual breaker 50 amp or a 63amp ? Thanks and really good videos 👍

GREAT INFO..... COULD YOU USE THE SAME BREAKER FOR disconnecting th batteries bank from midnite classic charge controller ?

Hi Nate Loving your videos - thanks. I have a question about wiring the switch up. I saw a video saying that you have the have the pos and neg on certain sides otherwise the unit bursts in to flames when turned off? Obviously + to + and - to -, but does it matter which side of the unit is used? mine has a large N on one of the terminals on the right hand side so guess that would be the neg connection, but does it really matter if i run the positive down the right hand side of the switch or the left hand side of the switch?? Hope that makes sense? many thanks

So if I wanted the breaker to act in the same way as a fuse would I choose a breaker slightly bigger than the short circuit amperage of my single panel. If that makes sense. Excellent video by the way.

Nate, great video. I have question I've been trying to figure out the answer for. I have 100 W panel installed on my campervan's roof and now I want a flexible addon system so I've bought a foldable 120 W panel that I'm pulling out every now and then to increase the solar power charging. I want it wired to the same Victron Smart Solar 75/15, all good there.. but! I want a flexible way of connecting and disconnecting the foldable panel. I'm thinking a socket and a plug but also a switch, either for both panels or only for the foldable one so I can flip the switch to disconnect, plug in the foldable panel, then flip the switch again to connect the panel to the Victron Smart Solar. Is that a viable and for the equipment safe way of handling my desired use case ? I realise now that you say that the voltage maximum is an issue for my idea.. If I use a disconnect maybe I'll mess it up by maybe flipping it on and off every day for a couple of times a day for a couple of weeks straight, they're not designed for that use as I've heard. Best regards Magnus from Sweden.

You are the man

LOL, that DC-DC charger just wasn't going to let you connect it instead of the MPPT charge controller! Love it. While the NEC doesn't _technically_ apply to off-grid RV installations, they are, nonetheless best practices. As such, I follow code as much as possible and practical. This is to say that not everyone does (follow code, that is). I just finished up redoing what what supposed to have been a completed off-grid solar system in a 1969 Airstream renovation. The original work was performed by an electrical engineer. When I got involved, there was one 100V/50A MPPT charge controller for the permanent roof-mount array *and* an auxiliary portable array! A 1-1+2-2 battery switch, rated for 32V max, was installed to connect/disconnect arrays. The 3S 100W panels produced ~65V nominal @ ~6A. This was all connected with 4AWG wire! What a mess. To correct this, I installed a second, smaller MPPT SCC for the portable PV array. I eliminated the battery selector switch, and installed a non-polarized, dual pole, DC breaker in an enclosure. I did the same between the roof-mount PV array and the first MPPT SCC. I also transitioned the wire down from 4AWG to 10AWG. Not only is the 10AWG more than adequate for the current, but the silicone insulation made cable management so much easier. A 30A shore power input was also previously installed...with zero protection between it and a MultiPlus worth well over $2K! I installed a non-polarized, dual pole, AC breaker on this line, as well, as one can never be certain what's coming off the post in many campgrounds. Unbeknownst to me, my client then took the trailer to the largest solar dealer in Atlanta. He paid them $500 to check my work. They assured him that everything was correct. However, they also told him that it was "overkill." What! All I can say is, "Buyer beware." Someone also told my client that the PV array must be grounded to the trailer chassis. Nothing could be further from correct. One should only ever consider grounding the frames of the PV array. Never the conductors! That's what the PV isolation breaker highlighted in this video is for! As always, Nate, great work!

I understand you need the breaker for a home system that is connected to the grid, ( I have a grid tie system) but I have not heard of having to follow code on a camper or off grid cabin. I put one in on the system that I installed on my toy hauler, but it was just for my own safety so I can disconnect it when I want to work on it

My problem is my heat gun needs a hell of a big solar array to run 😂 Great channel and video!

Good stuff thanks 🙏

Hi, I will be installing 8 Hanes Q. duo L- G8.3, 425w solar panels and I am confused what kind of PV array disconnect with DCbreakers. Thanks for your help.

Hi Nate, this is a great video like so many of yours. We live in Australia and I have a question, our caravan has a 1000 watts of solar on the roof and is connected to a Victron 250/70 mmpt solar controller. Our system hasn’t been installed with a solar disconnect, what size would you suggest. Regards Brian

I purchased this breaker box and 63 amp breaker from the product list on from your video. I see that the box fits two breakers. Is there a reason that I should not use a second identical breaker for the shut off and protection for my Orion dc to dc charger? 8 Awg for panel 6 Awg for Orion are the cable sizes I’m using. Thank you for all you do

Hi Nate. Thanks again for taking the time to put these together. We really appreciate it. Quick question, are you using the glands just because they came with the box? It doesn't seem like it needs to be waterproof 😊 and two cables in one gland wouldn't do that anyways, right? Are you worried about the edge of the entry hole abrading the cable? A simple grommet would work for that, no?

As always great video! a quick question - ive been wiring the breakers you just showed NOT to wire , as thats the one youve been wiring before in the past. ( 50amp marine grade breaker. ) Is this a fire hazard in all my previously installed vans ?

Very informative video, grateful your channel exists. Conscious of the space for electrics in my van (but of course safety comes first) - if I take two of those 48V max square breakers (one for the pos wire and one for the neg wire coming from one 24V PV) and position them side by side, would this have the same effect as a dim rail breaker and box? Thanks

I purchased two of these breakers from your link a while back. My plan was to use the second one in the same enclosure as a shut off for my Orion dc to dc charger. I was hoping that the 63 amp rating would offer redundant over current protection for my 6 awg cable coming from the van bus bar under the drivers seat. Is this an ok application for the breaker?

Hi, this is such a great video! I’m wanting to make a quick PV disconnect inline switch for a tiny, camping DIY solar generator / power box using a 12v Renogy 10A solar controller, connect to a 12 watt .5A solar panel and a 7Ah NPP SLA battery. It’s purpose it so power small devices for a tent. There are situations where it would be helpful to shut down the solar panel current coming to the controller while working on the battery or removing the battery. The controller instructions however say not unplug the panel before the battery so I’m guessing a regular inline SAE switch cable is not advised? If so, do you have any smaller current 12v switches you can recommend? Are any of the ones you pointed to in this video (that do not work for larger, gov regulated systems) good for my set up? Thanks so much!

Really great video. I would like to know what the Backer Board is that was used to screwing everything down to. I have looked at backer board for tiling but it is pretty brittle. I could use a piece of plywood but would like to find something a bit smoother. A sheet of ABS plastic would be nice but pretty expensive.

This video is a great piece of information! I'll use it in my system. BTW, what app or program do you use for those terrific (and clear) diagrams?

Hi Nate, will Anderson plugs comply with the standard?

I’ve ordered my disconnect and will be installing in the near future. Thanks so much for all your videos! I do have a question…when the disconnect is switched off, and the PV panels are active, ie generating voltage, is there any heat build-up to be concerned with?

I have a combiner box outside by the panels in a weather proof box with 3 - 15amp breakers will this be ok and not have to be in the house.

Nate: Thank You for excellent videos and information. I'm just starting to install solar on our travel trailer. Can you provide information on the H-5 disconnect box you used? Is it available on Amazon?

Outstanding.

Hi there. I wired this same breaker between my panels and controller. Are they ever defective? I now show volts coming in but no amps. All readings were good before I added the same breaker. Yes panel wires come in the top, and bottom wires go to controller….same polarity.

Question. Can I use 10 awg PV wire for other power uses inside the RV, as I've a lot of it left over. Thanks for any help.

I built out my electrical system according to the custom design you created for me and it works fantastic. I'm finally adding a 120W suitcase solar panel and the plan doesn't show a DC disconnect switch. Do I need one if I only plan to occasionally connect the panel to the MPPT charge controller? The disconnect would be the MC4 connectors between panel and charger controller.

I need a solar panel A/B switch. In other to send solar to two different inverters/chargers. Any ideas.

Great vid as usual. and I already bought the box and breaker, but...should you, or can you also have an inline fuse/breaker on a single 400 watt solar panel?

Hi Nate, I am a new subscriber and have been watching many of your videos. I am inquiring if I could use 2 of the resettable fuse inline circuit breakers as a disconnect, one on the positive and the other on the negative, if my two 160 watt panels are connected in parallel with an open circuit voltage of 22.9V and a Optimum operating voltage of 20.2V? Thank you.

Quick question. Would this solar disconnect work with 5.4 amp setup? I am starting off small, but I want to do things right. I have 100 watts of solar and one battery.

im setting up a system that has a max of 500voc pv input. so this 250v disconnect would throw the switch running at half capacity? any recomendations for my eg4 3000. im looking to push 370ish voc but need to find a good disconnect...im wiring 10 panels 250 watt in series 37.6 voc each so 10 gives me 370 voc 9 amp short circut 15 amp max series fuse rating...so no fuses needed just a disconnect?

Very helpful. Now you know.

Hi. According to your explanation: 63amps dc breaker >250v fits all solar systems between pv and solar inverter. What about the amp size of dc circuit breaker between the inverter and the batteries? And the ac circuit breaker between in and out ac current?

I have one question…. I have my tiny little teardrop camper wired up exactly the way you described! I’m about to rewire things, make a cleaner, tighter install. I’ve seen others install the solar disconnect without putting it into the waterproof box that you used. In my install I really don’t have very much space. Can I get away without using the water proof box?

Great video! Love your channel! Do you have a video on how to know where to install solar panels on an rv's (travel trailer in my case) roof? Thank you! Again, great channel!

I'm about to add solar disconnect breakers to my travel trailer, I have roof mounted panels as well as a thru wall plug for portable. I know I will add the disconnect between panels and controller for the roof mounted, but I also want to add one for the portable circuit. My portable has the controller attached to the array. Do I need to move that controller to between the battery and the disconnect or is it OK to leave the controller where it is (panel>controller>thru wall plug>disconnect>battery) I was thinking in this configuration the thru wall plug become an alternate 12V source with the disconnect to turn it off.

I have a solar generator in my house that will be hooked to three 400 watt solar panels wired in series. Together the three panels will generate 150 volts DC at 9 amps. It looks like the breakers you are using will work with this setup. Are there any similar breakers that can be used outside. I would prefer to mount the breakers at the panels on my solar ground mount rather than inside the house.

Nate Jim Partlow here. I purchased the DC solar disconnect switch for my solar install . I also see that you have used a solar disconnect breaker and din rail. Which is best or are both needed? In all your wiring diagrams you use one or the other, is it just a change in product and serves the same purpose. Thanks

Our inverter has 2 mppt input each can take 11A . but our PV Panel produces 17.33A. Can we use Y connector to divide current and input 8.665A per mppt input?

I switched to that double pole last summer because you mentioned it in another video. Thanks for the explanation as to why. It sounds like that was an update in the 2020 code so there's probably lots of incorrectly wired PV systems on RVs. I had the Blue sea systems circuit breaker and my series/parallel was around 44v so I guess it was ok but I had tunnel vision looking at the amperage and not the max voltage. Thanks for explaining this in detail, great job and thank you 😁👍

Excellent info you have provided! Would it be possible to combine the breaker shutoff feature and also be able to satisfy the fuse requirements on that side of the controller? Say one needed a 30amp fuse on the positive side between the controller and panels, couldn't the shutoff breaker be rated at 30amp, allowing the breaker to do a dual duty? An older video but perhaps someone out there has a thought on this...thx

Is there a breaker panel that takes and sends out three pairs of md4 connectors for multiple panel groups connecting to the new Victron smart solar 150/85 or bigger controllers...I'd rather use dedicated cables for each group and not seeing why I don't stick with the BogueRV prepared cables... new to all things solar though.

Can I use 2 single pole 10amp DC breakers side by side coming from just a single 100 watt solar panel, then to 10amp controller just for using as switches to disconnect + and - from solar panels......Or just put the breaker on the positive from solar panel. Cheers, great video's! Jason.

How does the NEC effect vehicle systems? Except maybe good practices.

One question, you said it is a regulation to have a solar breaker, so why does Jayco and multiple more caravan builders don’t install it? All that it is on the incoming positive wire is a 30a fuse.

Makes perfect sense, thanks! Question about the reset breakers you show at 5:37 though, the middle breaker shown is (I believe) an audio line breaker? I've been told these are totally unsuitable for use as a breaker for any constant DC power load. Is this correct? If so, what makes them unsuitable?

Thanks for the video! I’m wondering, hypothetically if a charge controller with an on/off switch would accomplish the same objective as a breaker?thank you

Do you have a video where you do this with multiple charge controllers? NOT the video of wiring multiple charge controllers to the Victron Lynx Distributer, but to this point. Or do you just use 2 entry glands and 2 of these disconnects?

Thanks for this. I was able to do this following your link for parts and watching your video. And I have to say it works!!! But I have a question!? This disconnects power from the solar array. So that you can work safely on your unit. But isn't there still power of the battery?? Thats a safety concern as well?? I dont know anything abt electric still learning tks. I guess when you shut of power, w the disconnect it should be followed with disconnecting the battery as well.? For total safety

Hi Nate, i ordered the breaker you recommended in your link, but the wireing diagram on the front of it says black red on top and red black on the bottom, in the video you wired the breaker black red on top and black red on the bottom..can you please tell me the correct wiring for the breaker you recommended in your link

EXCELLENT!!!!

Hi, i have a 3500w 24v inverter with 2 batteries ( 200amp each) my dc breaker is SPV-125 C80 (500v) and 6000 A i need to add 4 extra batteries of 200 amp each so the total is 6 , do i need to change my breaker to a bigger one or not? Thank you in advance

Nate, thanks for the great video again. They are always helpful! Is it legal to use the disconnect without the enclosure to save space by taking the DIN rail out and just mounting it directly to the backing board?

Dear, my pv array current is 415 volt , is there any available breaker or protection that can trip in case of short circuit or over current or amp

Awsome video as usual! Is it really a good idea to put two cables through a wire glands?

Just finished watching, great as always. My van is in the design phase and I am trying to physically locate this switch where it would be easy locate such that it is immediately accessible to emergency services in the event of an MVA or similar emergency. My thought is to place it in an electrical box accessible from the out side where the shore power enters the van. Passenger side just behind the rear axle. The electrical room is above the rear axle in the rear garage and accessible for maintenance by lifting the step to the twin bed above the garage. The solar shut off box and accompanying door will be a pain to fabricate but provides some security and yet quick accessibility and visible to fire fighters and EMS. Do you or any van owners have thoughts on this?