No video

How VVT Works on the ST170 and the VVT Pro :: EFI Explained by Matt @ M-Tech Automotive

  Рет қаралды 10,752

M-Tech Automotive

M-Tech Automotive

Күн бұрын

Here we look at how Variable Valve Timing used on the ST170 works as well as how the new Motorsport Electronics VVTPro controller works.
See here for a detailed write up and graphs:
motorsport-elec...
Find out more about M-Tech as well as pictures of current projects in progress on our Facebook page.
/ mtechautomotiveltd
Visit us on the web:
www.mtechautomo...

Пікірлер: 13
@Fanbladetowers
@Fanbladetowers 6 жыл бұрын
Thank you so much for the explanation I'm totally novice to new school technology so this is really helpful
@madformodz7252
@madformodz7252 4 жыл бұрын
Hi Matt can I remap my st170 I've been told I will only expect 7 bhp but will that give me moor torque and would I notice the difference????
@ofentsemogale7499
@ofentsemogale7499 2 жыл бұрын
Hi Julius here from South Africa. I own a toyota which has a 4age 20v blacktop which uses a vvt (the 4age was swapped into my car), the 4age has been converted to a carburetor. My question to you is how do I connect my vvt solenoid since my corolla is carburetor and doesn't have a ecu box? I heard you mentioned something about connecting the vvt solenoid to a 12v relay??
@DBPerformanceMN
@DBPerformanceMN 10 жыл бұрын
Do you make a system that will run the VVT on a Toyota 2JZ engine?
@MrFreddyFeatures
@MrFreddyFeatures 8 жыл бұрын
So why do we need vvt pro if the stock ecu adjusts the amount of advance depending on rpm to allows for the widest power band already?
@themtechzone
@themtechzone 7 жыл бұрын
It does but this ios for use with aftermarket ECUs on race cars etc that dont have VVT control built in, and no factory ECU either...
@juanantonioruizmoreno6041
@juanantonioruizmoreno6041 7 жыл бұрын
Hello, what happen if the VVT connector is left disconnected? my car doen´t walk its over 20km/H, it´s normal?? thanks
@roskataqv
@roskataqv 8 жыл бұрын
So is the factory setup the optimum ?
@frankiewalnuts
@frankiewalnuts 4 жыл бұрын
Does the me221 include this within it?
@opexo
@opexo 10 жыл бұрын
so if i understand correctly this little ~250eu box does nothing when used with factory EMS, no bhp/torque gains, it's useable only if aftermarket EMS is used like megajolt, megasquirt etc, correct?
@themtechzone
@themtechzone 10 жыл бұрын
Opexo, essentially yes it is aimed for aftermarket use only where the VVT Control is not an option on the new fitted ECU, that being said some gains may be possible on a standard car as Ford would of targeted emissions etc. Cheers
@mk2mania
@mk2mania 10 жыл бұрын
very thoroughly explained , ive read all the threads on all the forums and am goint to give one a try, i currently run a st170 motor with a dta s60 in my blue car and a zetec with cams and jenveys on another, so i will compare the 3, well done with the video and th vvtpro www.mk2mania.co.uk
@themtechzone
@themtechzone 10 жыл бұрын
Cheers, let me know if you need any tips and tricks with setup :)
Variable valve timing through cam phasing explained
7:50
Ginger Geordie Biker
Рет қаралды 213 М.
PEDRO PEDRO INSIDEOUT
00:10
MOOMOO STUDIO [무무 스튜디오]
Рет қаралды 16 МЛН
ISSEI & yellow girl 💛
00:33
ISSEI / いっせい
Рет қаралды 24 МЛН
NODIZ Pro Ignition Only ECU :: EZ-Tune Walkthrough...
15:42
M-Tech Automotive
Рет қаралды 14 М.
ITB ST170 THE MOUNTAIN RUN
7:25
Spark Plug Steve
Рет қаралды 17 М.
Cylinder Head 105 - Valve Job Basics
14:57
Jafromobile
Рет қаралды 3,6 МЛН
If You Understand Volumetric Efficiency You Understand Engines
16:45
driving 4 answers
Рет қаралды 860 М.
NODIZ Pro Ignition System : Product Walk-through and Features
12:44
M-Tech Automotive
Рет қаралды 19 М.
Big Engines Starting Up
10:16
Car News Central
Рет қаралды 40 МЛН
ME221 Wire-In | Zetec PnP ECU Install Guide (Supports ST170)
16:09
Motorsport Electronics
Рет қаралды 34 М.