How we mounted 35 inch tires on our Toyota Tacoma on a budget!

Рет қаралды 39,221

4 жыл бұрын

Subscribe to Dirtnation Offroad for more off-roading content!
This time on Dirtnation we go over how we mounted 35 inch tires on our 2017 Toyota Tacoma!
Parts list!
OME Lift
www.4wheelparts.com/p/arb-old...
Icon Add a leaf
www.amazon.com/dp/B00F0R7FWE/...
Wheel Spacers
www.amazon.com/dp/B07D755775/...
Patreon
www.patreon.com/user?u=21649110
Instagram
/ dirtnation_offroad
Facebook
/ dirtnationoffroad
Email
dirtnationoffroad@gmail.com

Пікірлер: 113

@mattandrickadventures8416 4 жыл бұрын

Dustin, your advice is spot on; this video was awesome and executed with total precision.

@SimplyCarReviews 4 жыл бұрын

Good advice when wheeling. You have gained wisdom through experience and shared it. Thanks for the insight 👍.

@66Duffman 4 жыл бұрын

Thanks for watching 🤙🏻

@ClassyTacos 4 жыл бұрын

Great Video, nice detail, thank you!

@adrianarredondo32 4 жыл бұрын

Love your videos by the way!

@toolhead147 4 жыл бұрын

This is the best 33 and 35 video you can't any clearer than that. I own a Silverado, wish someone did something like this for a Silverado.

@66Duffman 4 жыл бұрын

Thanks for the feedback! Would love to see videos like this for all truck brands

@rallypoint1 4 жыл бұрын

35’s!!!! Woot!!!! Your going to love the re-gear!!! Going to feel like a new truck again. Going up hills and stuff will be a lot easier.

@66Duffman 4 жыл бұрын

Can’t wait! 🙌🏻

@RockLander818 2 жыл бұрын

LOVE that you actually offroad. Thanks brother. Going look at those body plates…..

@66Duffman 2 жыл бұрын

Thanks for watching 👏🏻

@armandcouture4655 4 жыл бұрын

Great Job Dustin!! Thanks for the Taco insight brutha!

@66Duffman 4 жыл бұрын

Thanks for watching 🤙🏻

@k10couple8 4 жыл бұрын

"it's gonna cost ya less later when you party too hard" facts 💯

@66Duffman 4 жыл бұрын

K10 Couple 💯💯💯

@irvgotti94 4 жыл бұрын

2.5 or 3" and the biggest tires you can fit is what is always recommended by most. Great video bro

@66Duffman 4 жыл бұрын

Thanks! That’s what I’ve also gathered from my research

@douglansburg4545 4 жыл бұрын

Listening to every word hope to build a new tacoma in the future, thanks

@66Duffman 4 жыл бұрын

Not a problem glad you enjoyed 🤙🏻

@christophergoleco8325 4 жыл бұрын

Excellent advice & great ending. As a brand new overlander with 0 mechanical knowledge or skill, the end of your vid let me know what I might need & what might happen. Thank you!

@66Duffman 4 жыл бұрын

Not a problem hope this video helps with your builds

@blastnick 3 жыл бұрын

I love the channel and your tacoma! 1 question, did you get a 35 spare under there and how?

@NemesisDigitalMedia 4 жыл бұрын

I too hate my neighbors cleaning their damn yard while im trying to record a vid LOL

@66Duffman 4 жыл бұрын

KZfaqr struggles 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️

@danielborrer270 4 жыл бұрын

My '06 got a Free new frame 2 summers back and I had them put on OME 883 springs w/5100's (I'm not sure where they are set-lame I know) and have the LR UCA's stock LCA. In rear is a HeadStrong AAL. Finally my wheel budget filled and now I have SCS F5's in 17x9 -38 offset waiting..... to be wrapped in something..... as soon as my "new tire fund" fills up. And I know I have to get the cab mount chopped or relocated... Thoughts on this set up - as in - should it clear most of the time? Thanks, your video was great.

@jcolv16 3 жыл бұрын

Have you thought about chopping the body mount and adding a relocate bracket? Would probably eliminate your full turn reverse rub.

@davidguy12345 4 жыл бұрын

This is the only reason I’m jealous of Jeeps, fitting bigger tires is a breeze when compared to Tacos

@66Duffman 4 жыл бұрын

I agree... some jeeps clear 35s on stock suspension 🤦🏻‍♂️

@trailrunnah8886 4 жыл бұрын

Same with 4Runners. Have to chop the body mount just to run a 33... lame!! It takes less work to run 37s on a JL, lol.

@jaytee1086 4 жыл бұрын

What up Dirt! Don't forget spindle gussets. And check out Marlin Crawler LCA gusset set and never worry about those alignment tabs again.

@66Duffman 4 жыл бұрын

Got Total chaos spindle gussets and cam gussets in my possession putting those in when we do the regear 🤙🏻

@jaytee1086 4 жыл бұрын

@@66Duffman Damn! The taco is gonna be the beast of beasts!

@66Duffman 4 жыл бұрын

Can’t wait 😩

@lukebrinkman9263 4 жыл бұрын

With your lift did you have to replace your driver needle bearing in the CV axle? with a clamshell bushing? I've heard anything over 2.5" it can cause the stock bearing to fail. Great setup though and videos keep it up!!

@66Duffman 4 жыл бұрын

Never replaced the needle bear but I do know your supposed to...haven’t had an issue yet but it’s something to consider

@Recneps83 4 жыл бұрын

Check out Marlin Crawler RCLTHD if you want larger than a 35. They aren’t in production yet, but that is what my plan to do. With that system you can put 35’s on without cutting. Downside will be the cost.

@66Duffman 4 жыл бұрын

Thanks for the info 🤙🏻

@davesherwood5068 5 ай бұрын

I take it you never got the Thunder Ranger series A/Tr tires. I watched your final review on the Thunder Trac Grip M/T's and you said you thought you were and going to review them. Might be I just can't find it. let me know please. I have subscribed and like what you do. Thanks

@corycasarez77 4 жыл бұрын

Hey man awesome job with the review and advise. Just to let you known Taco Twonz on KZfaq has a business here in Colorado called Runnin 4 Tacos and they sell a body mount relocation bracket and they have an install video. Cheers. Ps not affiliated just supporting

@66Duffman 4 жыл бұрын

Sure thing! Thanks for watching and thanks for the info 🤙🏻

@jimh2061 4 жыл бұрын

Nice video with good info. I am going to be buying a Tacoma within the next year and plan on doing a 3 in lift with 33s. I really wanted to do a 6in lift and 35s but just couldn't see chopping up a brand new truck. Your smart to get the 5.29 gears with those 35s. Did you have to extend your brake lines with your lift kit?

@66Duffman 4 жыл бұрын

Good choice for the new truck....33 are a great option for new Tacoma owners...as for the brake lines I did extend the rear when I first lifted the truck...good call out

@MrBallsOfficial Жыл бұрын

I just upgraded my suspension/lift on my trd off road. Went with the 3” ready lift with bilstein 6112’s/5100’s on the rear. I currently run 33’s but since doing a full 3” lift the stance is begging for 35’s lol. I want to do a cab mount relocation with a bumper cut but I can’t find anyone in the Philadelphia area that does that kind of work 😕.

@66Duffman Жыл бұрын

That’s rough…we’re fortunate in Cali to have a lot of people that do that work…best of luck 👏🏻

@robertyoung8289 4 жыл бұрын

Now will you PLEASE remove the chrome Tacoma door emblems? Do it for me man! 😢

@66Duffman 4 жыл бұрын

🤣🤣🤣🤣🤣 when I do I’ll shout you out brotha 🙌🏻

@robertyoung8289 4 жыл бұрын

@@66Duffman Your a great man!

@Jack-fd8cx 3 жыл бұрын

They're cool tho! They work with his build lol

@stevegreen245 4 жыл бұрын

I know 35 is the magic number. But, milestar makes a 295-70-17. It's a 34. Well very close to 34. That's what I have on my FJ. Works for me. Gold mountain was no problem for me. Icon suspension and a body chop. That's it. No rub even at full lockers and flex. Just another option.

@MrCalifornia1234 4 жыл бұрын

Your mileage is a little off now because of your larger tires. You could re-calibrate it or just calculate it yourself using your phone for mileage and dividing it by the number of gallons you use.

@LeGrapeJuice11 3 жыл бұрын

I’ve got a set of 5100s all around and the cab mount relocation and planning on going for 35s, on paper I feel like everything should clear after some trimming. Any advice?

@66Duffman 3 жыл бұрын

On paper it does sound like all will clear...you’ll just have to see it’ll depend on the wheels your using and the spring rate if the front coils on your 5100s

@DirtRoad_Chronicles 3 жыл бұрын

How do you take care of the odometer and speedometer issue when getting bigger tires?? That’s really my biggest concern with dealing with the dealer servicing and all that how do you keep the odometer correct??

@66Duffman 3 жыл бұрын

You’ll need to get a tune a recalibrate the speedo..we’ll have a video on that soon

@chrisb6866 3 жыл бұрын

You said you use a 1.25 wheel spacer with a zero offset rim.. Can you use a negative offset wheel to accomplish this?

@66Duffman 3 жыл бұрын

Theoretically yes

@zachczyz2165 3 жыл бұрын

might be a dumb question, but why the add a leaf, if the ome set comes with the new leaf springs?

@66Duffman 3 жыл бұрын

I didn’t buy the set…only the front shocks for OME

@spencermoreau4582 4 жыл бұрын

Are you worried any about the front locker on ifs? I’ve never tried it, but Ive heard it is the best way to snap axles or cv joints

@SimplyCarReviews 4 жыл бұрын

The Colorado has front 🔐 locking differential and has front independent suspension.

@66Duffman 4 жыл бұрын

I do have concerns but I’m committed to using the front locker only when I have to to keep it safe 🤙🏻

@66Duffman 4 жыл бұрын

Your right but Colorado’s do also break tie rods fairly easily which is why Chevy sells the tie rod sleeves as an upgrade

@spencermoreau4582 4 жыл бұрын

Dirtnation Offroad ohh shoot, I had no idea! Well you guys do have the right idea though, and front lockers are still badass asf!

@Gabriel-jc2sc 2 жыл бұрын

I was at the bottom of hells gate in my 2013 Tacoma TRD Sport with no lockers, just a 2.5” Bilstein lift on 33’s and broken wheel sensor, so no traction control which means I could do burn outs with out the computer applying brakes to the wheels. I was getting ready to see if I could climb that bitch When I see some youngster almost crying and sitting on the ground next to his brand new ZR2 and a broken tie rod in his hand. I was like shit I hope that doesn’t happen to me half way up the obstacle. It took me like 4 try’s on different lines to make it up, but I was so freaking excited I didn’t break anything and still made it!

@HTXTRDPRO 4 жыл бұрын

Thx for the video. I got the Ray 10 17" wheels with -38 mm offset. Do you think that will help prevent rubbing? I'm debating between 305 and 315 tires.

@johnniemeyer3139 4 жыл бұрын

You can do 285/75r17 it’s a 34” tire

@HTXTRDPRO 4 жыл бұрын

I gave this some thought to but leaning towards more width with the 305 compared to the 285/75. Might roll the dice with the 305.

@lukestoyz 4 жыл бұрын

305 is a 32”, 315 is a 34.5”

@HTXTRDPRO 4 жыл бұрын

lukestoyz not the 305/70/17 it’s closer to 33.8”

@smallwoodmatt 3 жыл бұрын

How did the mileage change after the regear? I’m trying to decide if I do 35’s, already regeared mine for the 33’s but I over geared it a bit so 35’s would bring my RPM’s down more to where I want them just not sure.

@66Duffman 3 жыл бұрын

After the regear with 35s mileage dropped to about 13-14 on average

@Fakingittilimakeit 3 жыл бұрын

@@66Duffman youre getting that mpg from the computer?

@mattinthehat22 3 жыл бұрын

did you go to bigger rotors?

@rovon6486 Жыл бұрын

I'm curious with wheel why not get a -12 offset with the 17x9 wheel Vs wheel spacers?

@66Duffman Жыл бұрын

I don’t think they had them at the time 🙏🏻

@bmxland 4 жыл бұрын

Big Mike at Marlin Crawler has a IFS Tacoma on 40's.

@66Duffman 4 жыл бұрын

That’s true...his truck is a beast

@bmxland 4 жыл бұрын

I live near Fresno, seen his truck in real life at Marlin. It's f'in nuts.

@66Duffman 4 жыл бұрын

I hope to one day crawl as slow as him 🤣

@bmxland 4 жыл бұрын

He didn't stop at chopping the body mount. He actually removed and replaced a section of the firewall/floorboards on both sides.

@EricBuenoo 4 жыл бұрын

ok so only because you mentioned it lol. Theres a 3rd gen taco on 40s and another on 37s on IG.

@adrianarredondo32 4 жыл бұрын

If your mounting an ARB compressor inside your engine bay I have an extra RAGO fabrication arb double compressor mounting bracket I would love to sell to you. It mounts a compressor beautifully above the fuse box

@66Duffman 4 жыл бұрын

Shoot us an email

@trailrunnah8886 4 жыл бұрын

So you decided not to run the thunderer ATR? Too bad, when you mentioned that I was really looking forward to that review, I'm eyeing a set of these for my 4Runner but I can't find any info on them. Maybe I should just bite the bullet and be the guinea pig, make my own video! LOL

@66Duffman 4 жыл бұрын

Still may be reviewing the ATR in the near future....but don’t wanna ruin the surprise 🤫🤫🤫

@trailrunnah8886 4 жыл бұрын

@@66Duffman excellent! I can't wait!

@blueweb00 4 жыл бұрын

Is the added inch in ground clearance worth all this trouble?

@66Duffman 4 жыл бұрын

It’s more that an inch if clearance...and I’d say it’s definitely worth the trouble if you offroad like we do

@michaelrasmussen426 3 жыл бұрын

I wheel my 08 ram pretty hard core and every inch count's bro. (Signal peak) the (harder) way bro bro in my stock

@jeffreycuellar241 3 жыл бұрын

Will the 35’s fit in the rear with a 3 inch block?

@66Duffman 3 жыл бұрын

Yeah it definitely would…should even clear with a 2 inch block

@myronhensel 3 жыл бұрын

Not rubbing on the top of your fenders?

@66Duffman 3 жыл бұрын

No there’s alot of rubbing especially after taking off the sway bar

@FrancoisTX1974 4 жыл бұрын

Nice man, Tks. Would be nice to have pics of your inner fender ( insta maybe )

@66Duffman 4 жыл бұрын

François Lataste I can do that

@yeldor1162 4 жыл бұрын

Do you have alignment issues?

@66Duffman 4 жыл бұрын

I sure do...not from 35s but my cam gussets are bent...replacing them soon

@GhettoFabulous670 3 жыл бұрын

Are those wheels heavy without the tires?

@66Duffman 3 жыл бұрын

Not too heavy...don’t know exact specs tho

@robertyoung8289 4 жыл бұрын

Your spedo is way off unless you recalibrated which means your fuel mileage should be alot better than indicated.

@66Duffman 4 жыл бұрын

Good to know I’ll have to recalibrate after the regear

@osielalvarado1921 3 жыл бұрын

You don’t NEED to add that weld on plate.

@yibrancarrillo5579 3 жыл бұрын

Any broken part so far??

@66Duffman 3 жыл бұрын

Broke a CV axle once after installing the front locker

@JeremyPegram 3 жыл бұрын

Came here looking for a budget lift only to find out there's already a 3" OME lift kit installed... So, fitting 35's on a budget, if there's a 3" lift already installed, lol.....