How we paint WHITE SCARS | Warhammer 40k / Horus Heresy Painting Tutorial

Рет қаралды 2,224

5 ай бұрын

Its our first painting video for quite a while!
Do you want to know how Kieran painted the White Scar's so fast? We break down the process and go through what we think is a super fast way to get them on the table top.
/ the_kieran_show
/ @the_kieran_show
You could even use these methods for just painting a dirty white! (Horus Heresy Death Guard?!)
Below is the full list of paints/tools used in the video:
Citadel Zandri Dust Spray tinyurl.com/24z7x5ws
Model Color Ivory tinyurl.com/yc2apr86
Khorne Red tinyurl.com/2dymrswk
Rhinox Hide tinyurl.com/5n6pkht9
Sir Coates Silver tinyurl.com/3ht8fm7y
Skeleton Horde Contrast tinyurl.com/dp6pm9j6
Model Color Black tinyurl.com/yw6rbe8s
Bold Titanium White tinyurl.com/5x3yrf4c
Inktensity Crimson tinyurl.com/mry2y3vt
AK Streaking Grime tinyurl.com/5e2xz8wf
Odourless thinners tinyurl.com/jp76bjwr
Micro Sol and Micro Set
-----------------------------------------------------------------------------------
Find us on Instagram
/ the.kieran.show
/ fortyk.w
/ brushhourminis
-----------------------------------------------------------------------------------
If you want to support us
Patreon: / the_kieran_show
Memberships: / @the_kieran_show
BuyMeaCoffee: www.buymeacoffee.com/thekiera...
Hobby Workshop: www.hobbyworkshop.co.uk/?acc=...
Element Games: elementgames.co.uk/?d=10923
-----------------------------------------------------------------------------------

Пікірлер: 58

@stretch3281 5 ай бұрын

I prefer make up sponges, the triangle ones, for removing the enamal, you can be a bit more focused and aggressive without the danger of leaving fibres behind. Also removing more enamel from the top and to one side of the minie gives a pleasing highlight/shadow effect.

@the_kieran_show 5 ай бұрын

Yeah the sponges are great. Right hand Kieran uses those for oils on his knights. Do find they remove more of the grime though so depends how dirty you want the final finish to be!

@steffansaxton-williams5041 5 ай бұрын

Would love to see how you guys did your black Templar kill team

@the_kieran_show 5 ай бұрын

We will add that to the list!

@willvincent4829 5 ай бұрын

For a nice in-between red I go for a Mephiston Red plus Flesh Tearers red on top (apply one thin coat of each), I find it helps make it more dingy without going to dark .

@the_kieran_show 5 ай бұрын

Nice recommendation!

@warpwingminis 5 ай бұрын

Also would love to see a tutorial on your Chaos wolves, specifically the blue OSL 🦾

@the_kieran_show 5 ай бұрын

I'm sure you won't have to wait too long!

@mellily6178 5 ай бұрын

I look forward to more how you paint videos.

@the_kieran_show 5 ай бұрын

More to come that's for sure! Anything specific you'd like to see? 😁

@mellily6178 5 ай бұрын

@@the_kieran_show I am always on the look out for colour scheme inspiration, I find locking in a scheme the hard part, since I procrastinate for so long. I like 40k and AOS...although I look forward to seeing what you both do with AOS armies, I collect more AOS armies right now - there are more fun and cool options, I can't stop wanting more. 😄

@GrngoMandngogaming 5 ай бұрын

My favorite chapter finally! I’d love to see more tutorials guys. Keep it up!

@the_kieran_show 5 ай бұрын

Hai Chogoris ⚡ Anything you'd like to see next?

@GrngoMandngogaming 5 ай бұрын

@@the_kieran_show with more kroot on the horizon that would be a cool video maybe start with their KT or wait for the new releases. Or them blue custurd boys!

@singedtodeath 5 ай бұрын

I loved this honestly, I always feel like my models are a bit to clean to a fault but when using other washes it just doesnt work how I want! I took your advice and got the berserker blood shade for my works and love it so ill be buying a bottle of grime because I think its exactly what my models need to not only make them more grim dark but more unique to me

@the_kieran_show 5 ай бұрын

Thanks for the support mate! Really glad you took something from it. Grime is such a great cheat product, it takes some getting used to but it's crazy versatile aswell.

@raffehouston8940 5 ай бұрын

This was great guys! Love to see similar videos for your other armies like Nightlords & Fists 👍

@the_kieran_show 5 ай бұрын

Ooooh nice idea! Consider it done 😁

@paulbalfour9339 5 ай бұрын

Brilliant. Going to give the wash and inks ago. Cheers.

@the_kieran_show 5 ай бұрын

Let us know how you get on! 😁 Thanks for the support.

@paulbalfour9339 5 ай бұрын

@@the_kieran_show be honest, is it as easy as you make it look! 👀

@phase2006 5 ай бұрын

Great vid, if I can offer one piece of feedback, try the cotton buds that are designed for modelling, they're super compressed so they don't come apart as you remove enamels, and you don't risk getting fibres and threads tearing off and being left behind. Mr Hobby make them.

@the_kieran_show 5 ай бұрын

Oooh that's interesting! What's the price point like?

@phase2006 5 ай бұрын

3 pound for 50 - you can find them as 'Mr Cotton' in hobby stores. A+ really reduced the time I spent dicking around with medical ones@@the_kieran_show

@Mrhofer 5 ай бұрын

I started collecting recent and went in on Voltann. I went with a scheme that has black armor and green clothing. I feel like with the way the models are made and the colors I choose, there’s no fast way to do it.

@the_kieran_show 5 ай бұрын

Oh I'm sure there is! Have you tried basing with black, drybrush with dark grey/mid grey and pick out the green cloth?

@Mrhofer 5 ай бұрын

@@the_kieran_show I did a zenithal and airbrushed on the green. I think for the next unit I’ll be trying to airbrush the black on and do it like you described!

@alwoodsmodellingmayhem 5 ай бұрын

Enjoyed this guys. 👍👍I don't mind cheats when you need to bang out a back log of rank and file. Just as an aside, I am surprised you didn't get into LOTR Kieran when you have a Witch King of Angmar tattoo???? 🤔😂

@the_kieran_show 5 ай бұрын

Haha nice spot! LOTR is such a funny one, some models are wicked, some just aren't. Who knows maybe they'll creep into a challenge one day.

@erih2934 5 ай бұрын

I like this tutorial as it shows simple methods for great looking batch painted armies :) 2 questions came up for me while watching: 1. Do you use dry brushing instead of air brush for a specific reason, as in preserving the recesses better or is it just a personal preference? 2. Do you warnish in betweem some of these steps? I usually end up applying glossy varnish before transfers and grime (though I use oil paints for that), so I was wondering if you skip it or just didn't mention? Again, its a great result and the HH transfers absolutely rock.

@the_kieran_show 5 ай бұрын

Personal preference really and it depends what finish you want to go with. If you wanted a cleaner looking white scar then an airbrush would be a great way to go. If you’re applying the streaking grime over the transfers then that can help seal them in. For batch/speed painting it’s not really needed but for a character or something then we would. Depends how fast you want the process to be really. Oils would definitely benefit more from a varnish underneath though. For batch painted miniatures we would apply a thin coat of varnish when all the units are done so they are ready to be played with 😃

@erih2934 5 ай бұрын

@@the_kieran_show thanks for the insights :)

@jamesmackman7528 5 ай бұрын

Loved the video! Keep it up!

@the_kieran_show 5 ай бұрын

Thanks for the support! Anything you'd like to see next?

@jamesmackman7528 2 ай бұрын

@@the_kieran_show Heresy content! Or just more painting tutorials tbh. I've since tried this tutorial on some heresy white scars and the results were unreal! Thanks again!

@quendi5557 5 ай бұрын

this was really interesting, hope you do more of this.

@the_kieran_show 5 ай бұрын

Thanks! Is there anything in particular you'd like to see? 😁

@quendi5557 5 ай бұрын

@@the_kieran_show Seraphon or Orks. I'd also be really interested to see it done of bigger models though I understand if that's not feasible

@paulclarkson2119 5 ай бұрын

I've been thinking about trying streaking grime for a while, after watching this I may have to give it a go

@the_kieran_show 5 ай бұрын

We are going to do a streaking grime video too soon!

@paulclarkson2119 5 ай бұрын

@@the_kieran_show can't wait!

@warpwingminis 5 ай бұрын

Loves this more tutorial style vid, great paint job Kieran, I really need to try and use streak n grime, I got a bottle when you mentioned it in the last Scars vid but have been too afraid to use so far 😂 and fantastic editing Kieran 🦾 really useful to have all paints used etc, fab job all round. How long roughly do you wait between steps? As I heard that you need to leave a mini dry overnight before streakin' and how long do you leave on before removing with spirits? I've had issues with paints reactivating/colour bleed when using microset/Sol but this may be because I was using Army Painter speedpaint V1 that had this issue even with water 😂

@the_kieran_show 5 ай бұрын

Thanks so much for the support mate! My advice would be to use it on a tester model first and go from there, it's all a learning curve 😁 As far as time between steps, just when it's all dry really! I don't tend to leave things overnight unless absolutely warranted. Things like washes, enamels and transfers shouldn't need longer than 30mins-1 hour.

@stewilson8500 5 ай бұрын

This looks fantastic. Do the transfers have to be done before the streaking grime stage? I couldn’t help but see the lovely white patch underneath the transfer which looked a little ‘off’ with the rest of the shoulder pad.

@the_kieran_show 5 ай бұрын

Depends how fast you want them done. You could do it before, and then do a thin second pass over the transfers. But truthfully it depends how big the backing on the transfer is. Some of the more intricate ones have really big backing sheets (like the ones on the right shoulder) If it’s a batch painted unit you probably wouldn’t notice 😃

@fortyk.w 5 ай бұрын

You can always re apply with little dots of streaking grime after if it's a little patchy! 😁

@stewilson8500 5 ай бұрын

@@fortyk.w Brill. Thanks for the tip 👍

@Darkbeard89 3 ай бұрын

Hi, what colors do you use for gold and skin before using the Streaking Grime?

@the_kieran_show 3 ай бұрын

Balthazar Gold and Cadian Fleshtone I'd say? Use a Gulliman Flesh wash on the skin before you use the SG though!

@urilacambrafrias 5 ай бұрын

So after the grime you don't highlight ivory or red in any way? And if not with striking grime, what wash would you use? Agrax, reikhland, seraphim sepia?

@the_kieran_show 5 ай бұрын

You could do another light dry brush of the ivory if you wanted to bring some highlights back. If you didn’t want to use streaking grime, we’ve really fallen in love with the AK interactive Deep Shade Pure Grime. It’s not enamel based, so can thin it down with water to find the tone you like 😃

@urilacambrafrias 5 ай бұрын

@@the_kieran_show cool, thanks! They don't sell AK in my area, I'll maybe look for it online! I was thinking about basecoat my WS KT with grey and airbrush to white, but I recon the tone won't meld well with this kinda shade...

@GrngoMandngogaming 6 күн бұрын

Do you use a varnish before streaking grime?

@the_kieran_show 5 күн бұрын

Only if you’re using it over a contrast paint as sometimes the spirit can pull the contrast off the edges when you use the cotton bud.