Samsung washing machine diagnostic mode guide! How to check error code & test?

Рет қаралды 379,945

Күн бұрын

Today, we're diving into the intricate world of Samsung washing machines, showing you how to put your machine into diagnostic mode, check error codes, and run essential tests. Whether you're troubleshooting an F21 error or simply want to ensure your machine is running smoothly, this video is a must-watch!
You will learn how to enter diagnostic test mode on a Samsung washing machine to find faults. This video can be used on most Series 5 ecobubble, QuickDrive, direct drive, and digital inverters. We will show you how easily you can go into diagnostic test mode on a Samsung washing machines.
KZfaq playlist on all Samsung washing machine error codes and repair tutorials
• Samsung Washing Machin...
we will be showing you how to test the heating system, water valves, printed circuit board and wash agitation, a full motor test, testing emptying pump and recirculation pump, Hall sensor, and motor spin speed sequence, we will be running a full-Service test cycle it will help you find faults
Timestamps on Samsung washing machine diagnostic test mode.
00:00 intro to diagnostic test mode on a Samsung washing machine fault finding.
00:34 Important notice before entering Samsung test mode.
00:49 enter the test mode.
02:50 Testing water valves.
03:42 Fill drum with water always before testing heater.
05:20 checking the heater circuit heating element test and relay.
06:31 Testing the emptying pump and recirculation pump.
07:11 Testing the washing cycle motor rotates clockwise and anticlockwise.
07:59 Testing heating element when washing.
08:20 SPn motor test 400 rpm to maximum speed of washer.
10:39 how to exit diagnostic test mode on a Samsung washing machine:
11:50 Serving Samsung washing machines.
12:14 Support how-to-repair.com buy Paul a beer.
Samsung Washing Machine error codes:
Code starts with a number 0, 1C, 1E, 2, 3C, 3E, 3E1, 3E2, 3E3, 3E4, 3CP, 3CP, 4C, 4E, 3, 4C2, 4E1, 4E2, 4Ed, 5C, 5E, 4, 6E, 8C, 5, 8E,9E1, 9E2, 9H1, 6, 11E, 12E, 7,13E, 14E, 8,
Code starts with a letter AC6, AC, AE,bE1, bE2, bE3,CE, Cb, dC, DC, DC1, dE, dE1, DC3, DDC, ddC, dE2, E1, E2, E3, E4, E5, E6, E7, E8, E9, EA, EB, EC, FE, H1, HC, HE, HE1, HE2, HE3, HOT, LC, LC1, LE, LE1, OC, OE, OF, Plo, Sud, t1, t2, tSt, tE, tE1, tE2, tE3, tC1, tC2, tC3, Ub, UE, UC
🛒 Website for Parts Tutorials and FAQ’s
www.how-to-repair.com/help/se...
▶ Cleaning the drum on Samsung washing machine
• How to clean a seal & ...
▶ How to run the calibration mode on the Samsung washing machine.
• How to run calibration...
▶ Heating Element faults Samsung washing machine.
• Samsung washing machin...
▶ Door lock faults Samsung washing machine.
• Samsung Eco Bubble was...
Please remember to subscribe to our channel and click on the bell notification to get reminders
kzfaq.info?...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-pau...
Please remember to mark us as your favourite’s also I would be grateful if you would subscribe to our channel's social media as this really helps my site and keeps us going.
KZfaq: / @how-to-repair
Facebook: how.to.repair.appliances
#samsungtestmode #samsung_diagnostic #samsung_fault_finding #samsungwashingmachine

Пікірлер: 324

@djblox8896 2 жыл бұрын

do you know what eot and pst means? thanks

@How-to-repair 2 жыл бұрын

HELP NEEDED!! not at the moment but i will pin this to the top of page so some helpful samung engineer might give us the answer

@mattbandura9015 2 жыл бұрын

DARK GARMENT : Washing Motor Work Test (“PSt”) *check water level

@mattbandura9015 2 жыл бұрын

OUTDOOR CARE : EEPROM Test (Eok : OK, Eng : NG)

@mattbandura9015 2 жыл бұрын

B. The Sensor & Motor can be tested when you rotate the course encoder. - COTTON : Micom Software Code check - SUPER ECO WASH : Model Option Check - BEDDING : Water Level Frequency (ex. 242 -> 24.20kHz) - DAILY WASH : Water Temperature (ex. 254 -> 25.4℃) - DELICATES : Air Temperature (ex. 300 -> 30.0 ℃) *not used - BABY CARE : Duct Temperature (ex. 300 -> 30.0 ℃) *not used - OUTDOOR CARE : EEPROM Test (Eok : OK, Eng : NG) - DARK GARMENT : Washing Motor Work Test (“PSt”) *check water level - ECO DRUM CLEAN : Washing Motor Work Test (“tst”) - RINSE+SPIN : Spin Motor Work Test (“SPN” , move to MAX RPM)

@How-to-repair 2 жыл бұрын

thank you so much for assisting i learned something today thank you

@mustafizrahman4469 Жыл бұрын

I am a pharmacist. My w.machine has drainage problems, and drain pump stucked by rust/waste particles. I have test it by test mode, identifying problems and clean the pump. The machine is fully ok now. Thanaks for your Videos.

@rickgoodyer3886 4 ай бұрын

Thanks for this demo my machine stopped working after a power cut while mid cycle and would not turn on to any new program after. After running through the test program as you demonstrated it worked perfect again.

@darryldenoon6067 Жыл бұрын

Best Samsung washing machine video, thank you soooooo much!

@evertonffrench7823 3 ай бұрын

I'm watching from Jamaica 🇯🇲. Very helpful.

@suncanabilic9033 Жыл бұрын

Thank you so much - the video is very useful! Every step is well explained so it is very easy to follow the instructions.

@How-to-repair Жыл бұрын

Glad it was helpful! Thank you for leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@aerosoapbreeze264 3 ай бұрын

Excellent. Clear and Concise. Thank you !

@devaratnam1421 Жыл бұрын

Very well explained, thank you for the great video.

@ElRicardo81825 3 ай бұрын

This video is legendary!!! Extremely helpful!! Thank you so much! ❤

@janice3608 Жыл бұрын

You are wonderful. Thank you for your thoroughness.

@How-to-repair Жыл бұрын

Really glad it helped you fix your problem Thank you for leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@christianbilien1653 Жыл бұрын

Thank you very, very much from Paris. Because of your chrystal clear explanations, I was able to diagnose the washer motor was not working, which led me to a faulty connector on the front panel. Works like a charm now.

@fob3664 6 ай бұрын

This video is absolutely fantastic, thank-you so much

@kevingronemeier6954 Жыл бұрын

Amazing tutorial sir. Best video I have ever seen, very thorough and knowledgeable about the tasks that you are explaining. Well done, sir.

@How-to-repair Жыл бұрын

Glad it was helpful! Kevin Gronemeier this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@dennisbentley9242 4 ай бұрын

Just to say thanks for the info, just saved me buying another washing machine very good and easy to follow, solved at the moment and seems all working fine.

@How-to-repair 4 ай бұрын

I'm glad I was able to help you just remember to Mark us down to your favourites. As you will never know when an appliance fails it also helps us a lot, if you can share the channel @dennisbentley9242 please remember to subscribe to our channel as that really helps us kzfaq.infoe432SAb2g08 Thanks, Paul 👍

@paulmccarthy-brain9131 Жыл бұрын

Excellent detail - thanks

@How-to-repair Жыл бұрын

Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. kzfaq.infoUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@jagathwarnakulasuriya554 8 ай бұрын

Thank you very Mach, good explanation.

@johnmizzi1266 6 ай бұрын

Great, very informative, many thanks.

@ethanMonoP Жыл бұрын

Great video thanks!!!

@Salaar_tours_official Жыл бұрын

Thanks, followed ur instructions, comes up on fault.

@singh2007mahendra Жыл бұрын

Thank you so much your video it's very helpful 👍👍

@How-to-repair Жыл бұрын

You're welcome! I'm glad it was helpful. glad we could help you @singh2007mahendra this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@joaocoelho7331 Жыл бұрын

Excellent tutorial!!!

@How-to-repair Жыл бұрын

Thank you! @joaocoelho7331 please remember to subscribe to our channel as that really helps us kzfaq.infoe432SAb2g08 Thanks, Paul 👍

@kumarmukesh2398 2 жыл бұрын

Very interesting 👌

@tomlong4385 Ай бұрын

You're video just helped a ton.. thank you for sharing 👍

@How-to-repair Ай бұрын

Glad it helped What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be KZfaq superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @tomlong4385 please remember to subscribe to our channel as that really helps us kzfaq.infoe432SAb2g08 Thanks, Paul 👍

@oay6702 Жыл бұрын

Thanks you a ever so much, your video was so helpful ❤❤❤❤

@How-to-repair Жыл бұрын

@melquesedekcastro7480 Жыл бұрын

You're simply great the way you explain things. Congratulations sir.

@annadurai9630 2 күн бұрын

Excellent sir

@fwmkoobmoua909 10 ай бұрын

Thank you very much.

@scotsiain1970 Жыл бұрын

Good video, just bought a Samsung series 5 washing machine after our indesit washer/dryer broke. Samsung allegedly reliable so we shall see.

@hassanplombier3442 11 ай бұрын

thank you for this

@srinivaskosuri3932 Жыл бұрын

Vry useful video thnq vry much sir

@How-to-repair Жыл бұрын

Glad it was helpful! Thank you for leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@shafimehar4506 Жыл бұрын

Hello sir good day to you.your video is really mind blowing. Superb.Thank you sir

@thankachanyohannan5159 2 жыл бұрын

Very good video sir.

@How-to-repair 2 жыл бұрын

Thanks and welcome Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you

@WilliamGacquer Жыл бұрын

Thanks a lot!

@How-to-repair Жыл бұрын

Glad it was helpful! Thank you for leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@masoudmontazery907 Жыл бұрын

Good luck sir 🎉

@user-bz9dv8bx3m 4 ай бұрын

thank you very much that video help me to fix my machine

@tommylou7169 2 ай бұрын

Very nice to know. Should do more with other brands. Thanks

@How-to-repair 2 ай бұрын

I will be doing a lot more of these in the future @tommylou7169 please remember to subscribe to our channel as that really helps us kzfaq.infoe432SAb2g08 Thanks, Paul 👍

@جراح_الغسالات_الاتوماتيك 7 ай бұрын

Good luck and success to everyone Al-Jarjawi, automatic washing machine surgeon

@kabsgerry 7 ай бұрын

You are awesome

@nyoytorio4167 3 ай бұрын

Wow thank you

@carolo6412 Жыл бұрын

Excellent video - very helpful - any idea how to stop or what the cause of a musty smell in an empty Samsung 8kg (2016) washing machine.

@rbmwiv Жыл бұрын

Thanks

@triplecorner9678 Жыл бұрын

Ty sir…

@saverioautore2358 10 ай бұрын

Hi, congratulations for your videos, very clear. I have a question for you, I have a Samsung washing machine with DC error. There is 220 volts on the door lock connector, I replaced it but it still shows the same DC error. I noticed that the 220 volt is present on the connector only when empty, i.e. without the door lock connected, if I connect the door lock the 220 volt is no longer there. What do you suggest me? I'm thinking of replacing the board, but it costs a lot and I would like to limit the risk of making a mistake.

@demetrismit3090 Жыл бұрын

Great videos. Can you do this on a top loader? Mine is a 13kg, it is about 5 to 8 years old. There is no dial. Thanks!

@stiaanroodt86 2 жыл бұрын

Hi just want to find out if there is a test with the washer dryer testing the dryer heating side of thing? Great video thanks

@How-to-repair 2 жыл бұрын

not yet sorry Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@jacksonblack9408 Жыл бұрын

For Australian machines it's pretty similar, only you hold buttons 2&3 when powering up

@unblackdawn1134 Жыл бұрын

On german machines too . Thanks dir the comment M8 😊

@jh45411 Жыл бұрын

Not getting any help

@zaczac3024 Жыл бұрын

Note: to enter test on non ECOBubble machines, press and hold middle two buttons (Rinse & Spin) then press Power on button

@jacquesb5248 3 ай бұрын

dude you might just save a lot of money. sadly 3C error is back when i diagnostic mode. cant even go into the test mode anymore just getting :- _ icon

@sebekuk 2 жыл бұрын

For me, it shows an error 3E2, can you specify whether it will be an inverter motor or PCB? thank you

@abdullahminhas6802 3 ай бұрын

Hello, sir, how are you? I am Abdullah from Turkey. I am watching your video. You are a so great engineer. I have a washing machine this Samsung bubbles have a shaking notice. I sent to the some picture tell me that what happened this what problem. Thank you so much. So nice of you.

@How-to-repair 3 ай бұрын

If you upload a video to KZfaq, then send me the link. I will be able to look at it for you.

@davidmeadows4299 Ай бұрын

Thanks for the informative video. I have samsung Ecobubble digital inverter ww10n645rbw. The machine is not heating up. I have checked the element and thermostat with a electrical tester and they are ok. My pcb was replaced some years ago and I swapped the current one with the original one (which was ok at time), still no heat. I have run the diagnostic test (from the delayed start proceedure) but I am not whether I hear the element coming on during the wash cycle test. The simple diagnostic test shows no error. I am at a loss. Any thoughts? Do you stock the pcb's if it that? Many thanks

@How-to-repair Ай бұрын

Hi David, I've created an FAQ page for you. You can find a detailed repair guide for your problem on this page. I suggest you start by getting a smart multimeter and testing the heater, NTC sensor, wiring, etc. Here is the link: www.how-to-repair.com/faqs/samsung-ww10n645rbw-washing-machine-not-heating/ Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ 😇 Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

@tomasdesouza2847 Жыл бұрын

What a great video! Thank you very much! Running the tests I discovered my EcoBubble is not turning clockwise, and that's probably why it's stopping mid-cycle. Now what to do with this information? :)

@tomasdesouza2847 Жыл бұрын

It also ends the test with an 3E message (call customer service) but no message appears in normal mode.

@How-to-repair Жыл бұрын

not sure what you mean Thank you For leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@margiesedillo7771 3 ай бұрын

Hello ..how to unlock the Al Eco bubbles?please help me.thanks

@bigbirdpukindog 25 күн бұрын

Do you have a video on how to do diagnostic videos for the Samsung dryer model DVE45T6000W

@michaelhall7921 Жыл бұрын

Thank you for your explicit vids. They are for engineers? Please do you know if better instructions are available for the WF90F5E5U4X regarding the explicit operation /programming of the fabric softener? My wife has had a problem with the centre compartment (softener) always taking the fluid in prematurely. It may well be programming not set ever since 2016 since we bought the machine. Samsung say the program has been off at manufacture but she says not. I rang Samsung and the Tech said he would look at the manual! There must be more comprehensive literature because I see many others are not fully conversant with the softener application. There seems to be many unanswered questions about what seems to be a well engineered machine that lacks in data available to the users. Boilers have more comprehensive instructions for the users. This maybe because a boiler can blow you up but a washing machine no.

@catalinaorianagonzalezratt6550 5 ай бұрын

Hello! Thank you for your video! I have a Samsung washing machine model WW70J4463GS but it doesn't have the same buttons. From left to right, they are "temperature - spin - option - delayed end - bubble soak". Could you please tell me which ones I need to press to enter the washing machine's diagnostic test?

@outlawmorga 7 ай бұрын

Great informative video. I have error code UC, it’s intermittent and seems to appear half way through any cycle. I haven’t been able to pin point at what point the error code appear. Any idea?

@customerservice528 Жыл бұрын

What brand/model are the built in multimeters that you use? Thank you

@How-to-repair Жыл бұрын

these are the digital ac 50a ammeter i use they come in many types and colours ebay.us/FC2Wgf this is an affiliate link so I will win a small commission off eBay I hope you don't mind. and this a message for leaving a comment Thank you For leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@MateTransportGameplay Жыл бұрын

Can you show how to start the manual service cycle on the Samsung WW60J4260LW?

@monah1263 11 ай бұрын

Can I do this to my Samsung washing machine Schaumaktiv 7.0kg and I don’t have ecobubble

@craigwoodburn4436 2 жыл бұрын

My research on the internet leads me to think I have a common problem with my Samsung Bubblewash WF1104XAC XSA 03 front loader washing machine. When it reaches the spin cycle the drum spins very slow one way then stops and spins very slow the other way like a normal redistribution cycle, then once it reaches 9 minutes left it stays on 9 mins for ages. If you come back in 20 mins it will still say 9 minutes and the drum still is spinning very slow. Its like its still washing not spinning. No fault errors come up and eventually the timer starts counting down again, but still does not do a high speed spin. I did you a spin test using your video thanks and it reached 1320rpm. I've checked the drainage pump and filter of course and all seems good there. Plenty of water getting pumped out. I was wondering if there's a two stage door lock on my model that I've heard can prevent high speed spin if it's malfunctioning. That would be strange though since there's no error. Do you have any ideas you might be able to suggest please? Thanks!:)

@craigwoodburn4436 2 жыл бұрын

I just had a look at your website and I'm now wondering if I should check out the pressure switch and tube next...

@janbryja1889 2 жыл бұрын

@@craigwoodburn4436 hjj

@janbryja1889 2 жыл бұрын

@@craigwoodburn4436 hjj

@wandochadventures4696 2 жыл бұрын

Any luck I have the same problem

@kirstyhyatt7132 Жыл бұрын

Sounds similar to our problem and we have a bubble wash, I will try this and look at a few other options when the kids are asleep because I can't get the kids to stop touching whilst I am trying tgis

@Polskitime 4 ай бұрын

Thank you . Can i also change end song in the machine?

@jmcerezoreyes 5 ай бұрын

Hi, I have a Samsung eco bubble 7kgs and I get error 4E. I have cleaned the water inlet rubber that was clogged and it is now taking water, but the error still appears. What can I do? Thanks

@Pete.Ty1 Жыл бұрын

👍👍👍.

@How-to-repair Жыл бұрын

glad we could help you @1orbicularis this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@carolo6412 Жыл бұрын

How do I run a service wash - EcoBubble 2016. Thank you

@quaidkhan5072 3 ай бұрын

Nice vedio. my ecobubble stop in the middle of the cycle without appearing any error?

@jh45411 2 жыл бұрын

Hi turning my Samsung machine on immediately the error code comes up so it will not let me put it in diagnostic mode what do I do we've put in two temperature thermostats already the error code is TE

@DrColg8 Жыл бұрын

Recalibrate after the repair and give it a try. The error memory may have to be cleared to recognize the new sensor

@RRUKGhost Жыл бұрын

Hello good sir, great video. I’ve done all the steps and the washing machine appears to be working correctly. However whenever I try and run an actual cycle, it stops after 1 minute, I’m perplexed. Any ideas?

@Este974 Жыл бұрын

Same problem!! Any news about this problem?

@thes9220 11 ай бұрын

I have very similar problem. Machine fills up with water, but after when it come to spin, it stuck. Machine is not under or overloaded. Not heavy things inside. Any thoughts people?

@MKasap-te8vm 9 ай бұрын

@@thes9220did you resolve the problem? What was the cause of the problem?

@computerrepairsupgrades1109 2 жыл бұрын

This is good but i have a Series 5+ ecobubble machine with the long display fascia window and i have searched ages on youtube how to perform test mode on that and no-one has done one , the 2 buttons to test dont work on my series 5+ WW90T534W washing machine so do you know the sequence for these type of Samsung washing machines or have doe a video? Thanks.

@xulissesx Жыл бұрын

Got ? can you teach me?

@MikeCarter Жыл бұрын

My Samsung ecobubble ww10n645rpx/eu model doesn’t appear to respond to the suggested button presses to enter diagnostic mode either. Is there a new set of buttons to press for this model?

@Welton_Family 5 ай бұрын

Many thanks - mine does not go to tSt when I get to the part Rotate the program Left - instead it goes through the numbers and then goes to: 4C-OE, 80_ _80, 254, then finally UC and sticks there. It’s the older non inverter model. Any ideas ? In general I have the Random Pause problem when running programs and have an occasional 3E code, but am changing brushes in the next few days.

@anthonybaxter808 Жыл бұрын

Hi quick question I have the same machine all tests are fine apart from it doesn't turn while washing spins fine tho

@How-to-repair Жыл бұрын

It will depend on what model you have as there are different variations in motor. If you have a motor with carbon brushes, I would inspect them or if you have a motor that does not have carbon brushes then normally this will be a problem with the circuit board. Have a great New Year and please remember to subscribe to the channel. glad we could help you @anthonybaxter808 this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@raymondwheatley2796 7 ай бұрын

Hi We have a Samsung eco bubble with 5E. After 50 mins on quick wash the display reads 5E so we power down and power on the machine turn it to rinse and spin it runs to the end no water in the bottom of the machine so I cleaned the filter out removed the pump all looks good but you can’t rotate the motor no more than one revolution either way not sure if that’s right re assembly tested again same thing after 50 mins 5E also learned the waste on the sink trap. Any ideas. Thanks Ray

@MARS-GREENH0USE 4 ай бұрын

Loved you in aliens3 thanks. But my machine stops in spin and powers off and on forever, i took off the crappy plug splitter but now it still beeps there without finishing. Cant figure it out still. Thx

@user-jw1qi7qn1t 10 ай бұрын

Hello, please advise. I have a washing machine eco bubble 7kg / wf70f5e5u4w. The washing machine began to jam, as if it did not have the strength to turn the drum. It is interesting that it could only be washed on 3 programs - hand wash, wool and spin. All three work without a prewash and it worked for a few days. Now the whole program, this short one, and the spin cycle are no longer running. I observed the washing machine and I really think that the motor runs quietly, the water fills in, the pump drains ... the fault is really mysterious. After loading the smart apps - it says ˇThe motor rotor was diagnosed as locked" So there is a question? is the problem the motor or the motherboard? Thank you very much for your opinion :-)

@rodneysijp2343 2 ай бұрын

Do you also have a video how to fix a LC1 error on a samsung washing machine?

@How-to-repair 2 ай бұрын

hi LC or LC1, are we needed to drain pump issues? I have done lots of videos on drainage problems on washing machines. I suggest you check the pump the sump hose and also the waste fittings going to the appropriate connection that you have basically this error is saying unable to empty in the allocated period of time this is why you are getting these error codes @rodneysijp2343 please remember to subscribe to our channel as that really helps us kzfaq.infoe432SAb2g08 Thanks, Paul 👍

@1989bartek89 Жыл бұрын

Thanks for this movie! When I try to enter this mode I become only " -: " sign. Does it mean the PCB error? Should it be replaced?

@How-to-repair Жыл бұрын

Without having the washing machine in front of me, it is very hard for me to actually say with honesty, what the problem is, as I do not want you to go buying a new circuit board and finding that is not the fault

@michelle-bx6ji 2 жыл бұрын

my washer stops on the spin ,can you help please or should i buy one .thank you

@MikeCarter Жыл бұрын

Mine too. From watching videos and reading around it appears to be caused by the PCB needing replacement. Was it intermittent stopping on spin cycles or every time on any wash programme?

@stuh4645 Жыл бұрын

our eco bubble drum seems to oscillate side to side when rotating, it moves 1/2 cm from left to right is this normal?

@WantOneBob 10 ай бұрын

If you have an eco bubble 12kg with colour display, it’s the rinse and spin button to enter the test.

@How-to-repair 10 ай бұрын

Thank you very much for giving you the information to everyone. @WantOneBob please remember to subscribe to our channel as that really helps us kzfaq.infoe432SAb2g08 Thanks, Paul 👍

@davidrobinson-xc9bn 2 ай бұрын

Unfortunately following the sequence and locked my machine, tried all ways that I can imagine but remains in cotton wash mode. the samsung machine in question is a 12kg eco bubble.

@robertopavan2819 Ай бұрын

Good evening, I have a Samsung WF80F5E0W4W washing machine, sometimes it stops, the display stays on but the remaining minutes of the wash do not go down, generally it stops at 50...53 minutes remaining and it doesn't unlock unless I turn it off and restart it, sometimes it gives me 3E error. I checked the motor brushes and they are good... they will be about 2.5cm long. Do you think it could be a problem with the card? Thank you Roberto

@How-to-repair Ай бұрын

Hi Roberto, I've created an FAQ page for you. You can find a detailed repair guide for your problem on this page. Here is the link: www.how-to-repair.com/faqs/samsung-wf80f5e0w4w-washing-machine-stops-gives-3e-error-code/ Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ 😇 Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

@tomasjanssen4863 Жыл бұрын

Hi. How do i enter test mode on the WW70TA049AE ?

@icecalo Жыл бұрын

Running the test mode, my Samsung washing machine don´t run on anti--clockwise rotation and show the Error 3E. Board problem or motor?

@kennynvake4hve584 2 жыл бұрын

I dont see a code for AE6. How do you check the connectors...pull every wire connector apart? How can connectors come apart anyway?

@LuyandaVilakazi-gi4uq 2 ай бұрын

Hai I have problem my machine shows 2 clocks sign n I Kwon haw to remove one lock and the athor one I can't remove it n if I try to spine it Sheck bedle

@menakajayasinghe4595 23 күн бұрын

Hi my washing matching display an error sign as “ HOT” Why is it?

@AJ-tp5qj 3 ай бұрын

Hi i have the same washing machine the issue am facing is that the buttons on the dash stopped working ecept the on/off play buttons so i can actually use the washing machine but cant adjust ant of the cycles (spin , water temp..) any pointers would be highly appreciated Note: Child lock is not on :)

@SkyKid8492 10 ай бұрын

6e2 is the error code I can cut it on and have the display lit up like a Christmas tree but I have no control over the dail or buttons

@GaFo-qb6up Жыл бұрын

on the old model the circulation pump is at the rear and the drainage pump at the front?

@How-to-repair Жыл бұрын

Thank you For leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@user-ce5sr5hi7q Ай бұрын

Hi, why my samsung machine takes the fabric softenes at the beginning of the wash and not at the end, my clothes are without good smell because of this???

@elt1640 2 жыл бұрын

I keep getting error 3E on mine. When I do the smart check app it says check motor. Motor brushes have been replaced and still not working. It starts a cycle but keeps stopping mid way through. New circuit board today and that was faulty and wouldn't let us press on and off or move the dial through cycles. And turned on itself when plugged in without pressing the on off button. The washer guy is going to order another circuit board. Do u think that's what the issue is when it states check motor?

@How-to-repair 2 жыл бұрын

It will be PCB or motor fault. Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@bushramajid4956 2 жыл бұрын

During doing the test mode I got problem of 3E, I cleaned the filter as well. What shall I do?

@How-to-repair 2 жыл бұрын

Depending on which motor you have this may be a problem with the hall sensor or the carbon brushes in the motor. Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@matthewschug939 Жыл бұрын

I have a Samsung WF45H6300AW/A2 washer. It is having spin issues. I took the back cover off and the rotor is cracked at the hub and has play back and forth. I tightened the 19mm retaining nut and still has play. Am I correct in thinking that is my problem and I need a new rotor?

@How-to-repair Жыл бұрын

without having the washing machine in front of m a very hard one for me to answer Thank you for leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@clintbolan3112 7 ай бұрын

Hi from France. I'm the owner of a SAMSUNG W0804Y8E/XEF washer. I tried to run the diagnostic mode as you show in your video but when I push the same buttons as you to enter the mode the result is not the same and I have not the TST mode appearing on the screen. Can you tell me where I can find the specific process for my washer? thanks a lot.

@aniserver 2 жыл бұрын

unable to enter into diagnostic mode for samsung ww80k5210ww Add wash model. I followed the same instructions as shown in your video. Can you help me on this.

@MikeCarter Жыл бұрын

My Samsung ecobubble ww10n645rpx/eu model doesn’t appear to respond to the suggested button presses to enter diagnostic mode either. Not found a solution - have you @aniserver?

@KoskenKorva-qi2qy 3 ай бұрын

Excellent shown! I was trying to enter testmode on my Samsung but not able to, tried whats being shown in this video and also tried different combinations without any luck entering testmode. Anyone have any ideas how I can enter it on Samsung ecobubble 8.0kg WW80J5486MW/EE? I need to find out why its not warming the water, its cold and not getting any errorcodes. Also whats strange (i think), is thats its actually washing the whole program, not heating the water. Any help appriciated, thanks!

@KoskenKorva-qi2qy 3 ай бұрын

I checked the heater element and had no continuity so ordered a new part

@daneirrou 2 жыл бұрын

Hi. what if the machine won't go on diagnostics and calibration mode? After pressing the buttons sequences, it initiates but stops after just 2-3 seconds. The drum also won't spin anymore on cycle I select. Pls. Help.

@How-to-repair 2 жыл бұрын

Some machines have different test sequences . Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@ziofrascaccia24 9 ай бұрын

Hello my washer pauses mid cicle without spinning and then pauses itself. Also is not able to do a spin cycle unless is at 400 rpm. If i go into diagnosis mode i get this "-:". Do you have any thoughts?

@helinshevchuk5037 9 ай бұрын

Hi, did you find an issue? I have the same problem

@ahmedfarghaly7890 2 жыл бұрын

Do you know how to enter text mode for ariston dishwasher?

@How-to-repair 2 жыл бұрын

This really depends if the software where has the self-diagnostic mode built into it and this depends on the model I'm glad I could help you please remember to subscribe to the channel as that's what keeps us going and able to make these videos for you

@darrellheath5456 4 ай бұрын

Why is my Samsung washing machine constantly filling up with water, I have to stop it empty it and after that it works ok, the water valve works ok it’s as though it doesn’t know it’s added water ?

@venacorchea Жыл бұрын

On mine the knob that changes the type off washing cycle stuck on “Normal” it doesn’ change from there to any other moving to left or right, any help?. Thanks in advance.

@How-to-repair Жыл бұрын

might be faulty pcb Thank you For leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍