Love that you’re giving Hoyt a shot I know you’ll be pleasantly surprised once you start sending arrows down range with the Rx8 Ultra. Can’t wait for the paper tune and sight in videos!!!

when you threw the bow on the ground at the beginning I went through all 5 stages of grief at the same time 😡😰😱💔

Just a recommendation: Use a Prusik Knot for the Hamskea cord rather than the "football" and then having to manage the extra cord. This is how I set mine up and it is wonderful. Hasn't slipped ever!!

Make some videos of ways to work on your bow in the field. There all kinds of videos on how to work in them in a shop but knowing a few tricks for in the field would be awesome

I’d love to see string angle included in the reviews. I’m a taller shooter and this is something that means a lot to comfort and accuracy. Love what you’re doing! Thanks!!

I just got mine running last weekend. Such a great bow and made me a better shooter than I thought I should be lol.

I think everyone would benefit from a detailed broad head tuning video.

I always get a kick out of his “fast” setup videos being more then most customers experience 😂

My buddy started cutter stabilizers. In my opinion, they are the best stabilizers on the market!

I am eager to see you shoot these builds! Great video.

I had to go read the transcript, i could have swore you said someone was going to win this bow😂wishful thinking. Great content as always 🤟

Thank you for the build. The rx8 is more in my wheelhouse I have a 28.5 draw. I like 30 ata bows. They shoot well for me.

Huge topic is understanding forgiveness expectations! Even some of your videos that talk about reflex, brace (overall framed geometry) don't seem to play out as expected. Surprisingly I found the Alpha X 30 one of the most forgiving and easiest to shoot bows I've owned in a long time. Went in wanting to like/get the Bowtech Core 30. But at 27.5 inch draw their "one cam module fits all" setup offered very poor performance in comparison. (Fore those who want to know - In performance mode @ 70 lbs. the B/T drew easy BUT performance wasn't even close.) Hoyt has excellent performance, a great hunting valley & wall @ 85% imo, but draws a bit more stout - but still very linear.

I think a good basic how to video would be draw length. I just recently watched the elk shaped video that talked about the guys draw length being too long and him not even realizing it. I’ve also noticed that a lot of your bow reviews that the draw length the bow says it’s at is not always 100% accurate. After I watch that video, I went right outside, drew my bow back, put myself in front of a camera to see if I was leaning the way he was. It would be nice to know all the different things you could do to tell if your length was too long or too short.

Can’t wait to see the tuning and the shoot off!

Love your setup videos. Just wish I was closer to pay for hands on training.

Just realized that I often listen to these videos while working on the car, doing yard work, or driving. JJ I don't know how we ended up here, but you've become bow building ASMR. Sorry.

I wish I never got rid of my RX-1 Ultra. That is such a great bow.

I'm genuinely looking forward to when you do the shoot-off of the different bows against each other I hope you're doing a PSE Mach or Nock 30 build as well--all the hype sounds too good to be true for those of us with a 30+ inch draw length.

Thank you for doing the bow builds! When you are done with the bow builds and you pick one could you go over what you liked and dislike on the bows and compare them all? I know that takes a lot of time and you are busy the way it is. But it would be nice to hear the good and bad on the bows from your perspective.

I think a great video for beginners would be how to properly setup and use an index release. See so many new shooters and old ones that have their index release way too long which makes it a lot easier to punch rather than getting the full finger wrap and pulling.

Great video, thank you. You mentioned several times how light the Hoyt quiver is, also emphasizing that in order to achieve that weight certain accessories should not be used. That suggests that Hoyt probably does not publish the weight for "quiver only w/o extra mounting accessories". Even if they did, channels like yours usually like to trust but verify. That being said, can you provide the stripped down quiver weight? No doubt, many folks are considering alternatives to the Hoyt quiver (I'm looking at Tight Spot Quivers) so weight comparison is one consideration (function, durability, stiffness are even more important).

Great bow 🤙🏆🥇✅🎯🏹👌🏾🐐 same cams on the alpha X

Beautiful bow

Build a mach 30 with the PSE quiver please. Would really like to see the build.

When do we get to see the new 4mm components? Would love to see them vs similar inserts in an impact test to demonstrate why you preach titanium.

Would be great to get more detailed information regarding “stock” setup from Hoyt (i.e. is it in spec or out of spec) as well as stock string (are twists added to meet spec.)? What are the advantages and/or disadvantages for making changes with regards to let off (75-80-85) and back wall (hard or extra hard)? Do any of these changes affect velocity? What happens if you swap out Hoyt’s stock string to ABB, Gas or other strings (do you gain/decrease velocity, feel, draw cycle)? It appears that you like to use your stabilizer bracket and single bar, but what would be the “optimum” setup for stabilizing if weight was not a factor( would you run a front stabilizer high or low on the go-stix with back bar) and does this change if poundage changes (i.e. 65 lbs vs. 70lbs. vs. 75lbs)?

Like to understand more about putting twist in the string or cables. Not sure if you put clockwise or counter.

We like a good snug fit

I was waiting for the bow twirl so bad lol

Timing for cams with cheaper intro bows like an infinite edge pro. I just started archery and would benefit from this.

Would like to see you review and tune that hoyt with that new grim stod desh tuning kit. To see what you think of it. Rock on mfjj you are the man 🤘

Thanks MFJJ, tombstone looks great and you've decked that bow out superbly. If you're taking video requests I'd like to see the speeds as the mods change from 30" to the longer 30.25"+ mod for this ultra.... As a 30.5-31 inch draw that'd be interesting to see if not too much of a pain to setup. 👍

Woooo review time!

Awesome!!

Looks like a small Gillingham double bar!!!! 🍺🍺

Tuning arrows from the beginning to the end with broadhead tuning

What bow vice are you using? That thing is solid 💪

GREAT bow! I’d like to c u illustrate how much reflex a bow has. (Reflex-right word?)

That thing is so nice.

Good morning!

Are you just able to use the shorter piece to mount the quiver that you removed from the posts instead of the longer ones? That way you don’t have the extra sticking out?

Great video! Are you going to include a Prime RVX in your competition?

What is the material your epsilon bracket is made of ? Aluminum or composite ?

Tight spot over these Hoyt quivers by far. One disconnect instead of two, nothing sticking out the other side of your bow, AND my tight spot sits 1/32” off the riser. Seamless integration

Is the stretch problem with the epsilon also a problem for the trinity?

Awesome build better than the Mathew’s in your opinion? I’m asking because I undecided between Mathew’s or Hoyt?

How bout a good in depth video on Broadhead Tuning ? Would be a great starter video

Can we get breakdown and review of target bows

I just got an Alpha X 33, and am having issues with tuning. I flipped my original shims and fix the large majority of my tail right tear, but my Hoyt QAD rest is now maxed to the right and my cams are offset to the right. My bare shaft and broadhead is hitting about 8" to the right of my field point at 20yrds. Not sure entirely what to do. I think i could use a shim kit to solve the problem. Any advice would help big time. Also, does anyone else notice how tight of a clearance there is for the cables clearing the veins?

Do speed test and exact draw length measurement please

Will you be at Colorado TAC?

How to tie in a hamskea rest on your own should you want to change the cable out would be a great short 101 vid

The Hoyt stands are cool, but awkward to move the legs back and forth. Don't like shooting it with the legs flipped out so been a fail for me. If they make these easier to flip back it'd be a winner.

Man I went on Hoyt and build a bow it said $4300.00 I don’t know if that was tax’s on it ye man that’s crazy no it’s insane, insane

Basic video=determining draw length.

A few trad videos would be cool to mix it up

Chaging out shims on older bows past 5 years type

101 video on draw length, like how to find yours and things like that.

I’m a newbie, I’m learning with a bear adapt plus and want to upgrade to a Mathew’s or a Hoyt. But I’m undecided though. Or even a bear persist. So many choices help please guys. I’m a new guy so I don’t understand all the archery terminology. I’m learning little by little from my new archery and hunting family, thank you all for the great feedback in teaching me really thank guys you’re all the best. 🙏🏽

It's the goat himself

Zoomed in filming is nice and detailed, but don’t pull the camera out in the middle of a task. It’s nice to see exactly what you’re explaining especially when you’re covering a component people might not be familiar with, productive criticism not a gripe 😊

Everyone knows who’s going to “win” already. 🙄

You draw your bow with no arrow. You throw your bow on the ground. What other bad habit can I look forward to in the future? Do you want to be taken seriously or not?

Sure wish ta hell there were pro shops with dudes like u that know how to correctly set someone up perfectly here in central Oklahoma. There are NO pro shops within 2 hrs of where i live.

With how he throws the bow on the ground i wonder if those go sticks will be used lol