HPI BAJA GETS POWER! BIG BORE and PIPE! BRAP BRAP!

Рет қаралды 17,109

Күн бұрын

DDM!
www.ddmracing.com/
Sent us some goodies! The longest running fifth scale 2 stroke distributor in the USA! Always supporting races, and American made hop up parts! Go check out his amazing selection! Here are the parts covered in this video.
Massive shout out to Steve! For sending SBG and my self a little care package!
If you want to see the Flux version of the hpi! Visit SBG
• What's on the Bench We...
-Zenoah G320RC 31.8cc 4-Bolt Engine - Complete with Clutch
-Victory R/C PRO Side-Mount 5B/5T Pipe - Non-Silenced
-DDM Beanie Hat
-Complete DDM Hex Driver Set (Standard and Ball-End), with Handles and Socket Holder
-DDM "Black Magic" 6v Ni-MH 5000mAh Hump Receiver Battery
-DDM Racing Outer "Bite-Lock" Rings
-MadMax Big Digger "MX" Offroad Knobby Tire Set for HPI Baja 5b (Front)
-MadMax Big Digger "MX" Offroad Knobby Tire Set for HPI Baja 5b (Rear)
Support kpoprc! And grab swag!
www.kpoprc.com
HPI BAJA GETS POWER! DDM sends us a BIG BORE!
kpopRC affiliate links... NEED A RC DRIFT CHASSIS? link below
goo.gl/OQNZTe - Sakura d4 RWD
goo.gl/L5lEjt - cheapest radio, can mod to 8 channels
amzn.to/2oQL75h - DRIFT GYRO
MUSIC HERE
LISTEN TO THE ORIGINAL SCALE DRIFT PROJECT song "dynamo"
spoti.fi/3kVRrE0
KPOPS CAMERA GEAR
amzn.to/2o5GdEc
amzn.to/2oX7Xdu
Help out my channel! need something from amazon?
use this link!
amzn.to/2oX8dsV
rc racing,trophy trucks,build project,fun with rc,kpoprc,hpi baja re release,baja 5b sbk,self build kit,top 10 quesions,5b baja,hpi comes back,hpi racing,release of the baja,baja hpi,hpi sent me the new baja,clones,hpi clone,fifthscale racing,1/5 scale racing,big rc cars,gas powered rc car,The best rc cars,the newest rc car,should i buy,is the 5t dead?,HPI BAJA GETS POWER!,DDM sends us a BIG BORE!,32cc madness!,2 STROKE,zehnoah,32cc,gas rc car

Пікірлер: 63

@cyclonerc1625 Жыл бұрын

🤩 DDM ROCKS 😎

@BOTAJELL Жыл бұрын

👍👍👊⛽️🔥💨

@latigo_rc7597 Жыл бұрын

Thanks for all the good pipe info! Can't wait to get mine started.

@TurboGaming86 Жыл бұрын

I love DDM my favorite place to buy from and great service

@djapothecary Жыл бұрын

Super dope, love this content! Cheers to beers 🍺🍺

@chriswalter3155 Жыл бұрын

Ddm is the best place to get 5th scale parts. Been buying from them for years

@yannisarantakis Жыл бұрын

Man I love these videos

@Darwin.B Жыл бұрын

I can't wait till you both run them!

@cameronlogan01 Жыл бұрын

Love the videos as always. I checked yesterday, ive spent around 6K CAD on DDM! Best place to buy parts.

@mattsimshauser7541 Жыл бұрын

we love DDM thanks dave

@righn3494 Жыл бұрын

Looks awesome so far and cant wait to see some videos of this new beast... the g320 is hands down the best motor I've ever had in my Baja's. i would never go with anything else.. I run mine with the ss pipe and a silencer cobbled on the back of that so I don't go deaf.. lol

@bluegroovemodelsports9650 Жыл бұрын

Great video. Thanks for sharing. I like the engine choice. Should be a good one.

@pinoyDIY72 Жыл бұрын

Helpful video for the RC lovers and maker like me bro , thanks and stay safe, watching from Paris France

@garylowe8601 Жыл бұрын

That pipe looks grotty

@js64984 Жыл бұрын

Looking forward to a running video!

@Smuttz Жыл бұрын

Great video!! Keep them coming!! What servos are you going to run in this build?

@speedgears1236 Жыл бұрын

I thought I was done with 1/5th gas. But after watching your videos I got the fever 🤒. Im reaching out to DDM now to get a HPI Baja and setup. Thanks

@rjsv1000s Жыл бұрын

🍻🍻YIP!

@kevinklein1806 Жыл бұрын

BAAAAJJJAAAAA UPDATE!

@jamesmower1852 Жыл бұрын

I haven't had a fit scale yet but I'm thinking about ordering one of these new hpis in building it up

@TurboGaming86 Жыл бұрын

Man I’m saving up now really am hoping I can get my hands on one 🙏🏻🙏🏻

@paulmcnamara16 Жыл бұрын

Gonna be mental! 🤪👌

@scalebuildersguild Жыл бұрын

So Dave's name is Steve? I'm so confused.

@Smellswoods2896 Жыл бұрын

On ya DDM

@CopperCanyonTerrapins Жыл бұрын

Been waiting for this video!! That's the same motor I am gonna throw in mine!!! But probably with just the stock exhaust to reduce the initial build cost! Can't wait to see how it goes!!! What throttle and steering servos do you recommend on a budget?

@jonathanmathews548 Жыл бұрын

i just bought my first hpi BAJA 5B last Friday. I was a nitro guy in the past. its an older model that is all aluminum parts its decent shape. looking forward to learning a few things from your channel.

@kpopRC Жыл бұрын

YES! i just lent our loaner to a nitro buddy. and he's hooked. HA. i bet it has to do with turning it on pulling the cord and going with out tuning. you'll love it. PLUS.. its a bit quieter than nitro which can be a bonus.

@cyclonerc1625 Жыл бұрын

Notification squad 👍🔥🔥🔥💯✌

@DoubleClutchProductions Жыл бұрын

Brapp

@kingkongrc247 Жыл бұрын

Awesome video and great pipe 👍 I wonder if that pipe will work with a 38cc

@chefbeardsly Жыл бұрын

Ordered my baja kit today should be here next week!!

@nadersedaghat5694 Жыл бұрын

From where?

@chefbeardsly Жыл бұрын

@@nadersedaghat5694 went to my hobby shop and ordered one up

@nadersedaghat5694 Жыл бұрын

@@chefbeardsly very odd that is not even out yet.

@chefbeardsly Жыл бұрын

@@nadersedaghat5694 yes it is lol go to my channel I made videos on it already

@ajmetcalfe6219 Жыл бұрын

I need some DDM! Being a 5th scale fan in Australia parts aren’t always available. I’ve handmade a lot of custom aluminium parts, engine support brackets and mounts, air filter adaptors and that silly little plastic clutch piece that’s holds the clutch/motor to the brake assembly but now DDM makes all of those parts are they look wicked! I’m loving the new solid one piece clutch bell cover with integrated bracket to the brake assembly. What a time to be alive hahaha so much awesome! What is that pipe made of? Looks like mild steel? Ive found it’s all about carby tuning with these pipes, make sure to check pop off pressure of the metering valve spring to ensure you are getting enough fuel at full noise. and possibly change the diaphragm to K3-WYTA walbro spiral diaphragm. It maintains pressure a lot better for a more consistent delivery of fuel and as a bonus it doesn’t dry out and get wrinkles and flood your engine! The engine seems to return to idle faster also. Yeew!

@sakisSAVAGER Жыл бұрын

We look forward for an action 🎬 video...

@3props_does666 Жыл бұрын

Bring tha brAAAp already!!

@TastierBackInThe80s Жыл бұрын

Are there any pipes that tune down the torque? Or mod an existing pipe so the torque isn't diff destroying?

@713Ace529 Жыл бұрын

Make sure you bring Matt a set of earplugs! 😂

@ocdriftil3269 Жыл бұрын

👌👌

@BlackMetalRC85 Жыл бұрын

😃🤘

@coryyoung8289 Жыл бұрын

My mate has same motor, pipe and tyres in his Baja 5b 23/52 gearing...... The thing wheel stands and hauls ass! 🤟🤪😎

@aaron8891 Жыл бұрын

Do you have a link to the 5t exhaust you mentioned? I'm not a big fan of the side exhaust.

@kpopRC Жыл бұрын

www.ddmracing.com/15483-CY-high-flow-exhaust-canister

@davidbronson2883 Жыл бұрын

I think you will like the extra power. The stock can is fine to learn but for bigger smiles you cant go wrong with more power. Need it to keep up with sbg somewhat. Might even be able to gear up a couple teeth to 19/55 to bog down the torque and obviously more speed.

@kpopRC Жыл бұрын

they always go faster around the track with out a pipe. ha!

@davidbronson2883 Жыл бұрын

@@kpopRC yeah probably but i havent seen a track in 10 years

@peterbennpan7288 Жыл бұрын

I've got a Zenoah G320 rc engine in my HPI Baja TSK-B kraken. With a DDM Fast Pipe i was getting 50 mph top speed but I was too loud so I changed it to a TSK-B Olimat Silenced pipe and no matter how much I tune it there's excess oil passing out of the exhaust? My mix is 25/1 using Castrol XR77 fully synthetic oil. Any ideas as to whats happening or what I can do to stop the excess oil? I didn't do this with the DDM Fast Pipe?..... Thanks

@kpopRC Жыл бұрын

not sure. but i'd rather it be oily. at least you know everything is lubed up. Mine spits a ton of oil too. maybe this is because it's a much larger displacement. more oil and fuel getting sucked in there.

@DDMSteveB Жыл бұрын

The banner is also large scale

@wades5thscaleforlife872 Жыл бұрын

Sbg better get a aluminum trans case so it don't blow apart

@clayton8465 Жыл бұрын

Put a Taylor 50 in there!

@_blood_moon_proto_1500 Жыл бұрын

question, does DDM ship to the uk? if so, i might take a ganders

@kpopRC Жыл бұрын

i believe they do!

@_blood_moon_proto_1500 Жыл бұрын

@@kpopRC sweet

@peterbennpan7288 Жыл бұрын

What ever happened to Hostile tires? I spoke to Steve i think at DDM and he said someone broke the mould machine that makes the tires?....... I guess it never got fixed as I've not seen Hostile tires for a good few years?

@kpopRC Жыл бұрын

yeah not sure. it'll take some investment to bring back the us manufacturing. i think most guys have been burned super hard by clones companies. they just don't want the risk of getting put out of business.

@Nickwillfixit Жыл бұрын

Yeah bring on the fun. I do hope that 5th scale is coming back, maybe bringing back the 5B will make it happen. I run that pipe on both my HPI Baja's 5SC has the OBR Widowmaker 38cc the 5B has the BZM 38-5cc T (Torque Tune) and it really woke up the BZM engine but not a lot on the OBR engine it seemed the same as the Dominator pipe. I run the Pro-Line Badlands at the rear and the HPI Shortcourse 5SC front tyres on the 5B, these I also use front and rear on the 5SC the wider on the rear narrow front or the Hostile Motocross tyres. Mind I have a hell of a choice in tyres I have around twenty sets of four in just about every type of tyre made as I run a LOSI 5ive-T, two Krakens and two Baja's along with MCD, FG and a Traxxas gas buggy in parts waiting on parts.

@kpopRC Жыл бұрын

same! we're swimming in tires! Sounds like you have a couple of BEASTS there! maybe we'll love the pipe.. i guess time will tell.