Husqvarna LGT48DXL Bagger Install

No video

Husqvarna LGT48DXL Bagger Install | Burkeshire Farm

Рет қаралды 20,167

2 жыл бұрын

Installing our Husqvarna Grass Collection System. The Husqvarna Bagger unfotunately has a couple down falls.
Join us on our "Start to Finish," Barndominium Build as well as the daily growth and progress of Burkeshire Farm.
*****Amazon Links*****
Links are affiliate links, we recommend items we have found helpful for us, with no extra cost to you, and it helps support the channel! Thank you for your support!
Music provided by KZfaq audio library:
****Follow Us On Social Media****
FaceBook - burkeshirefarm
Instagram- instagram.com@burkeshirefarm
****Email Us****
burkeshirefarm@gmail.com
****Our Upcoming Website****
www.burkeshirefarm.com

Пікірлер: 21

@dwightbest985 2 жыл бұрын

So I have that same set up with the bagger, absolutely love the mower. Believe it or not I have not clogged the pipe once. The amount of air flow this unit has is amazing. If I can figure out how to send a picture of mine I will do so! Take care

@BurkeshireFarm 2 жыл бұрын

Hi Dwight, thank you for commenting on our video. The only time ours has clogged is when we have cut grass that was around 14" to 18" tall. Other then that we have had no problems and we too love our husqvarna. We'd like to see yours if it's possible. If not, you take care as well and happy mowing.

@Theextremepessimist 2 жыл бұрын

It’s a hit or miss with this. Mine is crappy, I’ve read others that are great. So, it’s a dice role with this one.

@BurkeshireFarm 2 жыл бұрын

Thank you for stopping by Zero point. I've heard the same from a lot of other people. Take care and happy mowing...

@L1ghtstorm 2 жыл бұрын

I bought a bagger frequently brought together from Lowe’s with the lawnmower to the YTH42 it did not fit it all around the blade housing big air gaps taking it back to lowes

@BurkeshireFarm 2 жыл бұрын

Sorry friend, Lowe's needs to get their ++++ straight. Feeling your discourage.

@hypoxicmatt4344 Жыл бұрын

Question for you...I've got the same fabricated deck which has the butterfly nuts required to attach the discharge tube. I have to remove this each time I am finished mowing....anything you've seen or done to make this a standard bungee and spring setup?

@Jer-me7pj 2 жыл бұрын

put the seat down and the hood will raise up all the way

@zaphodbreeblebrox9542 2 жыл бұрын

Don't tighten that brace up. That's the patented cut-grass-settling feature. Shakes it all down tight and compact.

@BurkeshireFarm 2 жыл бұрын

Thank you for the advice Zaphod. We'll keep that in mind.

@hankbowen9799 2 жыл бұрын

What was the product number you ordered. I have a GT48XLSi that I need what you ordered? I tried Amazon but their generic 46-48 does not work.

@BurkeshireFarm 2 жыл бұрын

Hi Hank, I apologize for the delay in our response. We've had some bad weather here lately and as remote as we are, it has a significant affect on our ability to connect to the internet. Thank you for watching our video. We purchased our bagger for the Husqvarna from MowersDirect.com. The part number is 582 55 96-01. Good luck and God Bless you and your family.

@hankbowen9799 2 жыл бұрын

@@BurkeshireFarm Thank you very much.

@chuckrhyne4422 2 жыл бұрын

Does the plastic piece you mounted underneath the deck need to be removed if you are not bagging your clippings? That seems like it would be a pain.

@BurkeshireFarm 2 жыл бұрын

Hello, thank you for watching our video. The piece that attaches to the mower deck is made of steel. It helps to push all the clippings towards the shoot. It does not have to be removed. Thank you again, have a great day.

@dwightbest985 2 жыл бұрын

If your talking about the flap that’s spring loaded, I actually removed it to take the pressure off the plastic tube that runs up to the bagger👍

@dwightbest985 2 жыл бұрын

Yes the plastic that mounts to the deck would need to be removed in order to use the mower as if it was stock! But being I always bag my grass I took off the spring loaded flap that came with the mower to release the tension on the plastic shoot that is mounted to the deck. If all this makes sense lol not much of a mechanic 🤷‍♂️

@BurkeshireFarm 2 жыл бұрын

I guess I may have been somewhat confused. The original question from Chuck Rhyne was, "Does the plastic piece you have mounted UNDERNEATH the deck need to be removed? The piece underneath the deck is steel. The piece of the shoot mounted to the side of the deck is plastic. Yes, in order to mow without bagging requires you to remove the plastic shoot on the side of the deck, which is only attached with two bolts. You do not need to remove the steel plate that is attached to the UNDERSIDE of the mowing deck. Thank you for sharing and commenting. God Bless and take care in this high inflation time.

@luisalcedo1375 2 жыл бұрын

How is it working so far for you?

@BurkeshireFarm 2 жыл бұрын

Hi Luis Alcedo, thank you for commenting on our video. I apologize for the late response. We were out on the farm for the holiday and do not have the internet there yet. The Husqvarna Bagger is working perfect for us thank you. I am very pleased with it and would make the purchase again if needed. Thank you again and God Bless.

@dwightbest985 2 жыл бұрын

Great machine I'd recommend it for sure just make sure you get the Kawasaki motor rather than the Briggs engine 👍