No video

Husqvarna Rancher 455 is leaking oil! WTH! Watch to the end.

  Рет қаралды 36,407

ulitepilot aka Zombie Dave

ulitepilot aka Zombie Dave

Күн бұрын

Sneaky and Pesky oil leak in this Husqvarna Rancher 455. "The question is only hard when you dont know the answer". Lol, I had fun with the investigation of the problem on this one. Thanks for putting up with me guys. If you keep commenting,I'll keep making these videos.

Пікірлер: 29
@tollcollector164
@tollcollector164 4 жыл бұрын
Makes cents! I have a new rancher 455, derailed the chain several times and since has been leaking. Thanks for the solving the mystery of the bar oil leak!
@ZombieDaveAZ
@ZombieDaveAZ 4 жыл бұрын
Thanks for taking the time to comment Trav. Stay safe brother. 👍🍺
@NotSure13
@NotSure13 5 жыл бұрын
mine has had that problem since day one.
@houndsmanone4563
@houndsmanone4563 3 жыл бұрын
Nice find, Dave and I'm going to check mine. I have a well-built Makita DCS6401 and it's one powerful chainsaw but the oil leaking occurred and now that you mention it, the plate may have gotten slightly disfigured, so let me check. I've done a lot to find out why the bar oil leaks so heavily after chainsaw usage. The chain is getting lubed while running (as far as I know). I'll check chainsaw bar flow to make sure the oil is actually lubing the chain while running. Thanks for the tip. Enjoyed the lesson 👍🏽🙂
@AllaroundNbackagain
@AllaroundNbackagain 3 жыл бұрын
There was a warranty recall on the internal oiler hose. Alas I didn’t find this out until years after. Bought the newer hose and will be putting it in soon.
@pamundson9
@pamundson9 2 жыл бұрын
I literally replaced every oiler part because it wasn't oiling properly. I put it all together with brand new oem husqvarna parts and had oil coming out of the bottom. I did notice that the cover plate was slightly bent, but it was brand new so I didn't even think it was bad. Took saw apart and put back together 7 times before I saw this video. Bought to dent the cover plate and give it a proper seal. Hopefully this is the issue, because I have plenty of oil from the pump now and it goes mostly out the bottom instead to the bar. Ill update when I'm done.
@DBLDoG
@DBLDoG 10 ай бұрын
The 3rd video I watched about this…….. first one to actually explain it……. Well done
@ZombieDaveAZ
@ZombieDaveAZ 10 ай бұрын
This makes me want to make another video 😄. Thanks for taking the time to comment. Have a great day.
@knobstonestickbows4962
@knobstonestickbows4962 4 жыл бұрын
Awesome vid my 455 leaks oil like that. Gonna check it out
@justincarmello8493
@justincarmello8493 2 ай бұрын
Beautiful video
@neilreid9005
@neilreid9005 5 жыл бұрын
Good catch. My kind of repair- many thanks as I have the exact same problem.
@airmailman1971
@airmailman1971 2 жыл бұрын
Great video! I would never thought to look for that!
@yungsmile7546
@yungsmile7546 2 жыл бұрын
Easy peasy, thanks.
@HangsLopsided
@HangsLopsided 4 жыл бұрын
Thank you. Good video.
@mynextketchfrontier6351
@mynextketchfrontier6351 3 жыл бұрын
Bro your a bad ass ..My man..That's epic ....Lol nice..Thank you very much..Really dam dam dam good clip ..Yes SIR...
@xxlxpman
@xxlxpman 3 жыл бұрын
Mine leaks but only when it's not running, so it's most likely not that for me.
@n2daair23
@n2daair23 2 жыл бұрын
This seems to be a very common issue with these saws. WTF Husqvarna? Y’all really can’t figure out how to design a cover plate/hose connection that isn’t dependent on a pressure point that becomes defective just by getting an extremely small ding in it. My saw is brand fukin new and leaks all the bar oil out overnight. I sure wish I would have discovered this BEFORE I went with Husqvarna. Hasn’t even cut any wood yet and I’m already fixing the piece of shit! Steer clear of this brand of chainsaw, you have been warned!
@rll1954
@rll1954 10 ай бұрын
I replaced my cover with a new one but when tightening the screw the left end raised up. I cannot figure out why. Suggestions?
@ZombieDaveAZ
@ZombieDaveAZ 10 ай бұрын
Not right off hand I don't. Maybe I'll get one in the shop soon and get back to you. Sorry that's all I got for now.
@dcrog69
@dcrog69 2 жыл бұрын
Mine leaked like that also but turned out to be a stripped plastic oiler gear.
@davessmallenginerevival2847
@davessmallenginerevival2847 6 жыл бұрын
Nice catch. I wouldn't have cought that but then again I'm a dope.......got an impact.....joking
@davessmallenginerevival2847
@davessmallenginerevival2847 6 жыл бұрын
ulitepilot aka Zombie Dave noooo sirrrrr
@SwormCycles
@SwormCycles Жыл бұрын
So.......how do you get the sprocket off to then remove the cover plate? Guess I'll have to search for another vid now.
@PilotViewProductions
@PilotViewProductions 5 жыл бұрын
Did that fix the problem?
@ZombieDaveAZ
@ZombieDaveAZ 5 жыл бұрын
Yes Thay saw is still running perfectly. Thanks for asking
@bwyyy7306
@bwyyy7306 Жыл бұрын
How you know it’s a real Husqvarna? It’s leaks chain oil
@captainbart
@captainbart 5 жыл бұрын
sounds like a guy trying to justify charging somebody alot....this is totally NOT the solution to this issue. Husqvarna/Jonsereds all have a poor seal where the oil supply line passes thru the tank......it can only be re-sealed/properly sealed, by taking the entire handle assembly off. This guy is talking pocket protector mechanics....and taking far too much verbage to show it.
@ZombieDaveAZ
@ZombieDaveAZ 5 жыл бұрын
More verbage and pocket protector mechanics here😊 ➡ kzfaq.info/get/bejne/Z9emi7te3Ki6foU.html Thanks for stopping by and commenting. Dont forget to subscribe for more.
@milesinnz
@milesinnz Жыл бұрын
smart !!!
Husqvarna Chainsaw Oil Leak Repair
15:46
Pilot View Productions
Рет қаралды 251 М.
How To Actually Tune A Chainsaw!
13:28
American Piddler
Рет қаралды 1,4 МЛН
Can This Bubble Save My Life? 😱
00:55
Topper Guild
Рет қаралды 71 МЛН
The Giant sleep in the town 👹🛏️🏡
00:24
Construction Site
Рет қаралды 19 МЛН
КТО ЛЮБИТ ГРИБЫ?? #shorts
00:24
Паша Осадчий
Рет қаралды 1,1 МЛН
How to fix a Husqvarna Rancher 455 oil leak
12:12
Matt's Yard Maintenance and Garage
Рет қаралды 552
Chainsaw Leaking Oil? Here’s Why!
6:32
Vintage Engine Repairs
Рет қаралды 54 М.
Proper Way To Tip A Lawn Mower Over
8:50
Steve's Small Engine Saloon
Рет қаралды 4,2 МЛН
WOW! Hidden Greasing Spot On A Chain Saw
7:44
Steve's Small Engine Saloon
Рет қаралды 1,2 МЛН
Husqvarna 455 Rancher muffler mod
23:50
Samish Saw Works
Рет қаралды 58 М.
Husqvarna 455/460 Rancher oil line repair up-grade
4:03
Coolyards
Рет қаралды 4,6 М.
Husqvarna 455 Chainsaw Not Oiling...Fixed!
9:01
The Greasy Shop Rag
Рет қаралды 8 М.
Husqvarna 455 rancher teardown and rebuild, bolt for bolt!  part 1
31:19
Husqvarna 455 Rancher not oiling bar.
19:23
MissouriOldTimer
Рет қаралды 8 М.
Can This Bubble Save My Life? 😱
00:55
Topper Guild
Рет қаралды 71 МЛН