Alex, I just wanted to say thanks for taking the time to answer the comments and help the RC community. It is usually tough to answer questions about electronics and your patience is appreciated!

No one has done such a detailed overview of the OTA I bet even half the pros don’t even know half of the parameters… Cheers Melbourne Australia

Thanks Alex that was very helpful 👍🏁🏁🏁

Alexander i want to thank you for the information provided mate. It has helped me alot in getting my 4wd buggy dialed in for the carpet racing.

Really informative, thank you! I'm trying to gather more information for ideal settings for RC DRIFTING, and this video has filled in a lot of the blanks for me!

Great video exactly what I needed, I'll be referring back to this on many occasions. Thank You. 👏👍

Thank you Alex

Off road would be cool to . Tell ty or someone to do a off road video. Great info on road & carpet thanks 🙏🏻

That was the video i waited for long! All features and esc setups explained very detailed. Thank you Alexander!

so far this is the most detailed explaination about the esc program/setting,, actually im looking for other esc but yeah, not so different and still got the knowledge from this video,, thank You !

Great video just got the OTA wifi . This the best video very comprehensive. The HW doesn't really explain anything. Export import etc.. thanks very helpful subsxibed.

This was very helpful. Thank you

Outstanding information. Thanks!

Saved in my rc car info folder..... Will be regular referred to. Thanks

Outstanding explanation

Very helpful. Thank you

Thanks for the video walk through, what if you have no pre-selectable profiles available in the list

Good info. Subscribed!

Thank you.

Thank you!!!

I like how you explain how to use the settings to a racers advantage, I see here it looks like your talking to on road racers. I race 1s 21.5 oval 146' run line do you have any suggestions for me on how to set up my ESC for oval? I appreciate any suggestions that you can give me and oval racers on this subject!

Thanks Alex for all these videos, there are clear and then so helpful. One question on this one : I don't understand the difference between brake control rate and Brake frequency. I seems that both make the brake feeling stronger or smoother. Could you please elaborate on this ? thanks

Thank you, Alex. That was a great presentation. I wonder if you have any info on gearings and FDR to maximize performance (batteries and motor) so they run efficiently (not over work but maximum performance). Thank you for info, Alex

Hi there, great video! I think you convinced me to get one of those OTA programming dongle. I am returning to the hobby and I am trying to relearn lost skills and being able to change a few settings in the filed and save profiles is very useful when compared to the programming box either on it's own or linked to a pc. A quick question, what particular setting would you recommend to play with to help me manage the speed and power of that these modern machine have too offer? I have Hobbywing stock motors on my 1/10 4WD buggy and 2WD touring and XR10 Pro V2 on both and I still struggle to manage their power and speed. Thanks.

Is there a big difference between the justock gs3 and a pro elite?

My hobby wing xerun xr10 pro esc , with xerun d10 10.5 motor don’t have options for motor directions. I. Tried using led program card, but still not showing motor directions. I’ve been driving by switching blue wire to orange all this time until I burned out my motor last week because I put sensors wire to connect esc and motor. Could you please guide me how to switch the motor direction? Thank you 🙏

Thank you very much for all the videos, it is very interesting for beginner. Could you please give your advice on the setting for a 13.5 motor on asphalt track. I practice in “rc infinity” track in Bangkok. Thank you again.

Thanks for the video. With the OTA can I with the ota change from blinking mode to stock or modified mode on my XR10 Justock to give my 17.5T hobbywing motor a little more power? Thanks

With boost and turbo timing in the ESC, do you need to be concerned with the amount of static timing on the motor?

Very nice video. Can I use OTA programmer in Hobbywing QUICRUN 10BL60? Thanks and greetings from Tampa, Florida.

Hi Alex, do all pro mod racers use drag brake? because every time I try it I feel like it slows the car down too much through the corners.

Alexander, can you explain why you choose a 4.5 vs. a 5.0 motor for outdoor asphalt? I'm setting my car up for a medium sized asphalt track. Most of the racers here are using a 5.0 but I was thinking a 4.5 might be better, but I'd like to hear how you make that decision. Thank you from California!!

Hi Alex, do you know the difference between this OTA Programmer and the previous version of Wifi Express?

If I set the end bell to 30 degrees timing and 20 boost and 20 turbo does that add up 70 degrees total timing ? How does that effect performance ?

A quick question: Do we have more parameters to change if we use the ota? Or is it the same thing of the lcd card/computer?

NOTE: not all Speedo/ESC's have the same settings, more pro version ESC has more settings then the EZRUN series.

Hey, So I just got the ota programmer for my xmaxx 8s with hobbywing 6s and leopard 1160kv motor. This truck used to scream. I was having an issue of after 5 minutes it was cutting off and I would turn it off and back on which will make it run fine. I ordered the programmer and did the software update, and this truck is slow as heck now. I’ve been through the settings and can’t figure it out. Any advice?

hello for 🇬🇷 what is best set up for 1/8 buggy for race?I have 1900kv motor and xr8 pro esc to mx8r mugen tnks

I'm running 13.5T super stock with V10 G3R motor and XR10 Pro G2 Speedo, I race in a not so large outdoor asphalt track using 6.1-6.3 FDR. Is it normal for the speedo and motor to reach a temperature between 80-95°C after 5-8 minutes running time? the outdoor temperature normally between 30-36°C

Hi can someone tell me for a car without brake and on a carpet race of 24h wich dragbrake setting is the best ,Thanks.

I just got mine for the max8 g2 combo.. I dont have a 1/3 of all of thoose settings... Wonder why

Great video. Can I use the old wifi module with the new HW App v2?

Will the OTA programmer work with the Hobbywing HW-711 ESC? I cannot find anything on this ESC anywhere.

What is the limit of timing combine motor turbo and boost in a 3.5 turn motor max timing?

i followed this method and when i turned my esc back on it goes into sensorless mode even tho its set to sensored. It blinks green when in neutral and my knowledge that means its in sensorless mode and the motor cogs down and it runs like crap. What caused this to happen? i swapped out the sensor wire and the same issue. I dont have another motor to test out or esc. any help would be great as this is disappointing. This Xerun XR10 Pro Stock is less than 2 weeks old, ive only rany 1 pack through it. If the esc blew im going to be pretty disappointed in the brand. Please advise

the explanations for the TRC and PWM are somewhat the same. always referred to as "punchy". which one would you dial in first?

Are you still running the hobbywing xr10 pro g2s?

I guess you change the motor pretty often, compared to the average hobby racer. If you have like 35-40 degrees of timing on the motor, then add 28-40 on the esc, you'll have a lot of timing added. I must ask you, do you change motor often? I mean you probably change the whole car once or twice a year! :p

Hi. How can I activate the real time data function?

Hej Alexander Jeg søger parameter for RX8E med Xerun combo xr8 plus g2s 4268D G3 2800kV onRoad-B ved du hvor jeg kan søge. Peter Lind

How can i get a low throttle for a drift spec. I use xr10 pro & 8.5T . Really hope that u can help me:)

Does anyone have a 4.5 turn drag motor starting points ?

How does throttle and brake pwm affect temps?

I can’t find the motor rotation help

Please for off-road Astro!!!