HW100 Disassembly and anti tamper removal.

Рет қаралды 27,651

3 жыл бұрын

Sorry about the re-upload, had to fix a audio issue, anyway I got the Adjustable hammer spring kit from HW100 tuning and ill be fitting it and a seal kit from him in the next vid.

Пікірлер: 52

@X5COO Жыл бұрын

Thanks very much for going through this procedure for us all, I have just stripped my rifle down and give it the full HW100Tuning treatment, my rifle is now back to its former glory, powerful & accurate. It took me most of the day, but your video helped enormously. Once more, many thanks.

@sub12airgunners Жыл бұрын

That's great, exactly why we started the channel to help people like you that want to have a go 👍 nice one

@MartinHealy 3 жыл бұрын

So glad to see you giving the brilliant HW100 some treatment. Another really great video - thank you so much for sharing your knowledge and skills. Looking forward to seeing Part 2. All the best, Martin

@andik.4235 2 жыл бұрын

Best break down video I have seen so far for this lovely rifle. Thanks for the effort.

@sub12airgunners 2 жыл бұрын

Thanks mate, glad you enjoyed it. Thanks for watching.

@paulec5864 2 жыл бұрын

On the later HW100 the anti tamper can be removed by drilling with a 7mm drill bit inside the lock tighten adjuster to clear the riveted over end of the hammer spring guide. Then when removed heat the adjuster to free off the lock tight. No heat damage to the spring this way. The old adjuster can be refitted with a cut in screw driver slot or the spring shaft shortened to about 9mm on the hammer so a new adjuster with the Allen key slot could be used.

@tonyrebelo3038 3 жыл бұрын

Nice one Jake, I really enjoyed that. Good old German solid state engineering! The design certainly has stood the test of time, and I have no doubt your improvements will make it a much better rifle all round.

@lisawood516 3 жыл бұрын

loving your posts. very enjoyable to watch. Keep them coming!!!

@Happy-Me. 3 жыл бұрын

I'm so glad I have Weihrauch guns. So well engineered/made and consequently so reliable!

@sub12airgunners 3 жыл бұрын

They are very nice little rifles. Thanks for watching.

@Happy-Me. 3 жыл бұрын

@@sub12airgunners You're welcome. I've subscribed. 😎

@weirhauch1002 3 жыл бұрын

Wonderful detailed video 👍waiting for part 2 please🙏

@Tim_Bassett 3 жыл бұрын

Really clear video - keep them coming :-) Glad to see a dremel make an appearance

@tonyrebelo3038 3 жыл бұрын

By someone that knows how to use one Tim ;p

@user-vt7ob9by1g 9 ай бұрын

Is it recommended that you're better off to fire off a HW100, now and then, rather then leave it sitting for half the year, to prevent the hammer spring from compressing a bit, or the regulator settled down, due to lack of use? or does it not make much difference if its fired regularly or not? How regularly should a PCP like the HW100 be fired to keep everything stable/power from dropping? Fabulous informative video, dunno how you can remember where everything goes! 🤪

@philbate5555 3 жыл бұрын

Love the look of that gun jake, challenge for you ! Could you make me one of those stocks in blue. Lots of useful information there mate , love all you're posts.

@Happy-Me. 3 жыл бұрын

Great video. I've recently Chronographed my HW100 to find that it's lost a bit of power from last year. She's now down to 10.5 ft lbs from 11.4. The gun has no leaking etc.

@sub12airgunners 3 жыл бұрын

The hammer spring has probably compressed a bit, or the reg has settled down, neither are uncommon in rifles that have been sitting for a while, I would recommend contacting HW100 tuning if you want your rifle serviced, he knows the HW100 better then anyone. Thanks for watching.

@Happy-Me. 3 жыл бұрын

@@sub12airgunners I've just got back from my Gunsmith. He's done a lot of these before so he says it's not too big a job.

@johnbonnici8048 2 жыл бұрын

Hello Happy Me. My 2 1/2 year old Hw100KT has done just like yours but power is down to 8.3 ft/lb . My gun also has no leaks. Have you solved your problem and if so would you kindly explain to me how it was rectified . I will shortly be taking it to my gunsmith and your help will be greatly appreciated. John Bonnici.

@Happy-Me. 2 жыл бұрын

@@johnbonnici8048 My Gunsmith disabled the anti tamper so I adjusted it myself with a chronograph. It's running at 11.5/6 now. I don't use the gun often as I love my TX200 but I've been told to let off a few shots every now and then otherwise the power will drop again.!

@johnbonnici8048 2 жыл бұрын

@@Happy-Me. Thank you for your attention and reply. I'will point this out to my gunsmith. My gun reduced power even though I shoot it almost daily . Did you do any other adjustments apart from the hammer spring tension eg. Regulator pressure and O'ring replacement?

@jeffhello1444 3 жыл бұрын

Nice work 👌👏

@stumorgan7725 12 күн бұрын

Great video, very helpful thank you, what is the best size punch to use for knocking out the cocking arm pin? Many thanks

@myadventureman2636 9 ай бұрын

Nice adaptor..very presicion❤

@sub12airgunners 9 ай бұрын

thanks for watching 👍

@jezza42 2 жыл бұрын

Excellent video, thanks for sharing. What Allen keys is it you use please? They look really good

@sub12airgunners 2 жыл бұрын

EDS allen keys, I got them from eBay. Thanks for watching.

@jezza42 2 жыл бұрын

@@sub12airgunners great, thankyou 👍

@pmurp9x 8 ай бұрын

Fantastic video, but i think it showed that i don't have the confidence to take it on myself 😒

@greg105 6 ай бұрын

Hi. A great video of the strip down. However, unfortunately I’ve managed to lose the spring and larger ball bearing that goes into the indexing assembly. Is it possible to give me the sizes of these two parts or a part number so I can replace them please? Also while I had it all apart I decided to soak the hammer housing in degreaser but it has reacted with the surface leaving a white powdery film. I’ve tried lightly rubbing with steel wool to some improvement. Any suggestions as to how I can recover the shiny finish? Any help would be greatly appreciated. Cheers

@aranhw1007 Жыл бұрын

I'm going to be removing the anti tamper on mine soon,was wondering do I have to replace the hammer spring at the same time or just use the original?.

@squirrelhunter4life909 Жыл бұрын

where can i buy the green stock and the Weihrauch HW100 Buddy bottle conversion kit ,I went to the form website and could not find the stock

@sub12airgunners Жыл бұрын

I don't think you can get the kit anymore but you might try Livens guns

@greg105 6 ай бұрын

Hi there. I am in the process of replacing the receiver on my hw100. I am at the stage of removing the indexing arm spring. I am using a 1.5mm Allen key with no luck. Can you help please? Cheers

@shaunharris3690 Жыл бұрын

Hi what size Allan key for the hammer grub screw?

@johnpaullus6649 2 жыл бұрын

Hi, is that a Jacko kit or Dr.Bob buddy bottle kit? Do you know if you can still get the Jacko kit and if so where can you purchase one? Thanks...

@sub12airgunners 2 жыл бұрын

Its the Jacko one, he does not sell them anymore, but you can sometimes see them pop up second hand but not often, Thanks for watching.

@greg105 6 ай бұрын

Further to my previous comment, could this require a 1.3mm Allen key and not 1.5mm?

@greg105 6 ай бұрын

Hi. Regarding the bottle adapter. Is that a dr.bob’s version? From the pics on eBay his has a male thread into the bottle. Which means no valve. Is this correct? Cheers

@sub12airgunners 6 ай бұрын

no this one is a different one not dr bobs one but i don't think they are available anymore so you have to use the dr bob adaptor😀

@tctokis 3 жыл бұрын

Hi this is for a fac rifle or 12ftb

@mkmk0081 2 жыл бұрын

From where i can find this kit ??

@petenikolic5244 10 ай бұрын

That Bottle adaptor is a Torx NOT an allen

@sub12airgunners 10 ай бұрын

yes but it can be removed with an allen key with no issues and more people have an 8mm allen than Torx bits😀

@secondfirstsecond 2 жыл бұрын

Really, that placement of gauge and plug destroyed the aesthetic. Why didn't they move it down under the stock?

@sub12airgunners 2 жыл бұрын

Don't know for sure, but if they were both in the bottom it would push the bottle out a little further, or most people have rails fitted so having the fill port and gauge on the bottom would limit the amount of pic rail you could mount on the bottom. Thanks for watching.

@secondfirstsecond 2 жыл бұрын

@@sub12airgunners Ive seen one with plug at the bottom and gauge on the right side, fit nicely.

@brianjenkins6868 2 жыл бұрын

That must be the worst pcp air rifle design ever.

@sub12airgunners 2 жыл бұрын

Not a fan of the HW100? me neither to be honest, the 2 piece block is a bit off putting and the use of cast components doe not sit well with me, but saying that I was surprised at how well everything fit and it was nicely finished, just not my cup of tea. Thanks for watching.