HWFLY Lite or PICOFLY Lite??

Рет қаралды 35,329

Күн бұрын

Hi.
In this video I'm soldering the PICOFLY Lite to Switch Lite.
PCBWay is the leading provider of custom printed circuit boards, flexible printed circuit boards and even CNC and 3D printing.
pcbway.com/g/Ct5733
pcbway.com
HATS PACK drive.google.com/file/d/19sjS...
If you'd like to book a repair, please visit our website
console-repairs.uk/
(+44)07451466640 - WhatsApp number (just for messages)
Microscope 4K 48MP HDMI USB Digital Video Microscope Camera Adjustable Magnification 180X C Mount Len Zoom Stand 56 LED Ring Light www.aliexpress.com/item/10050...
Microscope arm HUANUO Monitor Arm Single for 17-32 inch Curved Screen, Height Adjustable Monitor Mount, 360° Rotation Monitor Stand Support VESA 75/100mm
www.amazon.co.uk/gp/product/B...
Soldering iron AIFEN-A902 with C245 handles www.aliexpress.com/item/10050...
Soldering Tips JBC C245-102 and C245-001
HOT AIR Sugon 8620-DX
www.aliexpress.com/item/10050...
Multimeter FLUKE 17B+
Power Bench supply KORAD KA3005D
Enameled Coper Wire 0.1 mm
www.ebay.co.uk/itm/193702642730
CYNEL SOLDER TIN WITH FLUX DIAMETER 0.7 MM SN60Pb40 WEIGHT 250 GR www.ebay.co.uk/itm/174273470845
FLUX AMTECH NC-559-ASM

Пікірлер: 75

@Error404NotFnd 9 ай бұрын

Hello, this is your viewer from Russia again. I want to once again thank you for the high-quality and understandable videos. Thank you!

@davethibodeau386 9 ай бұрын

Thank you for such a great breakdown and explanation of how to complete this modification. I was able to successfully install on my lite thanks to you. Keep up the Excellent work!

@highroyds 9 ай бұрын

Got the same one, the flex cable you don’t use I had a similar issue with the flex and noticed the pads weren’t all the way to the edge so was able to slice just enough of the edge from the flex pcb so I could solder the pads across. Was fiddly, but got it done. Great video as always 👍

@sl4y3r6 9 ай бұрын

Just followed your videos to install 2x HWfly's into my kids switch lites. Thanks so much!

@DiegoLima-vb4sj 6 ай бұрын

I love your videos. Greetings and respect from Brazil

@Linkref 9 ай бұрын

Impressive job like always, is there any purpose soldering the back of the apu flex?

@ColonelSevendot 9 ай бұрын

Thank you for another great video. :)

@af6727 9 ай бұрын

Great work. Thanks.

@ElSkeppo Ай бұрын

Just seeing this video now as i read up on modding. One thing to note for future is that the launch option for CFW-sysMMC can lead to the switch being banned if it's not in airplane mode (Even when not connected to wi-fi) due to the way it communicates with the system NAND. CFW-emuMMC or stock - sysMMC are really the only 2 options that should be used, and quite a few people doing the modding service disable this before the user gets the console back to ensure they don't use it.

@twayne_ 20 сағат бұрын

Thanks for the advice

@ViajandocomAbraaoeTiana 5 ай бұрын

Amazing work!! I also did it here and unfortunately I lost the 3v3 capacitor, can you tell me what its value is, so I can add another one again, thank you very much!!

@Cobalt985 5 ай бұрын

The wires you use as jumper cables, are those coated in enamel? If so, do you burn it off beforehand, or does soldering burn it off?

@DasDunkleEtwas 8 ай бұрын

Do you know the value of the capacitor on the regulator, where you solder the 3,3V for the chip? Mine is lost after I tried to install everything

@ddb5354 9 ай бұрын

What kind of soldering iron do you use ? I dont know if its the cheap tips or the actual iron but mome just doesnt solder as good

@mohammedmariff9034 4 ай бұрын

Thank you .. can you show how to setup sd card ? I have same lite bust stuck at fusee fatal error

@gm-jura 9 ай бұрын

Hi. Which version of Picofly firmware did you use on this installation?

@zazzcode369 8 ай бұрын

Today ive soldered the Picofly RP2040 Lite in. It worked and gave me the PicoFly No SD screen. After putting in an SD Card i got an Blackscreen... Then i removed the Chip and now i have a Blue Screen ... Do you know what it could cause? I saw something with the EMMC

@erikfoster2129 8 ай бұрын

Asking for help i recently installed my mod chip but when i turn it on it gose the normal boot as if the chip wasn't on there is there something im supposed to do the the modchip before installing it

@vmakar85 Ай бұрын

Realy good jobe! tnx

@john-johnvanhamme3066 6 ай бұрын

Hello friend, thank you for your videos! Does this still work with the latest Switch Lite updates? I want to try

@javiten1 8 ай бұрын

hi there! what size/gauge are the wires you're using to do this? I've some experience on soldering, bought the chips and a microscope just to do this and have some fun :) thanks for your response!

@tvpartsworld806 8 ай бұрын

Hi. Enameled Coper Wire 0.1 mm www.ebay.co.uk/itm/193702642730

@OkiDingo 4 ай бұрын

Looks fairly easy.

@shahrulaiman4154 3 ай бұрын

hi sir..im follow all solder points as shown in video.. my switch lite working in hekate.. but it said eMMC is initiated in slow mode.. is my point solder incorrect?

@braindeadbrick553 6 ай бұрын

SIemanko zrobil bys moze tutorial jak wgrac firmware jak chip przyjdzie pusty? a i zaraz po lutowaniu co nalezy zrobic ? skad pobrac pliczki na karte sd itd super filmy ogolnie

@ryuklee6478 9 ай бұрын

Muito mais simples. Ok. Você é fodão.

@masterroshi5720 3 ай бұрын

What thickness(milimeters) copper wire is best for this mod?

@benjaminfenech5808 9 ай бұрын

Yeah I had a lot of trouble with original hwfly lite flex cable pads, definitely better to solder directly like you have 👍

@zhennik263 6 ай бұрын

But it needs more qualification

@kylokot 7 ай бұрын

Czesc Ziomek Mam pytanko odnosnie hwfly cos poszlo nie tak i mam czarny screen. Odlutowalem chip teraz podswietlenie jest oraz dzwiek takze Co mam sprawdzic wszystkie pomiary sa ok, Czy spotkales sie z takim przypadkiem? Pozdrawiam

@tvpartsworld806 7 ай бұрын

Czesc. Wedlug mnie masz uwalone gniazdo od lcd. Sprawdz czy piny nie sa pokrzywione.

@ibrahime316 9 ай бұрын

From where do you get the chip ?

@CHROLOGAMINGexclusive28 9 ай бұрын

what do you of that wire? to connect ?

@marknoble6459 7 ай бұрын

Hi please do you have a schematic for this.

@anthonyneethling3441 7 ай бұрын

Hi would like to know on the hwfly pcb. when i use a tester on point c and a it seems to be connected. should it be like that?

@tvpartsworld806 7 ай бұрын

Hi. No, they shouldn't be connected.

@KeilDaBaker 4 ай бұрын

When soldering on sp1/sp2 can you completely cover the chip or just the contact points?

@jangshikkim4069 3 ай бұрын

if you cover the chip the chip(capacitor) will short bro

@maxmax-xx7nw 9 ай бұрын

What can go wrong with the flex "cable" provided ? Cuz i used it on my switch and it works so far (3 months). Anyway its the same type of cable that is used near cpu, and this one desnt fail ?

@jrok96 9 ай бұрын

nothing goes wrong with them once installed! what logic would that be???? he just has issues getting them soldered so runs wires instead. you need to adjust things to your skill set sometimes.

@maxmax-xx7nw 9 ай бұрын

@@jrok96 i don't know what logic is that, that's why I am asking, he said he had few returns, so I assumed they stopped working

@Yanto-rv1qu 9 ай бұрын

What are you install cost?

@Consti8705 9 ай бұрын

Hello, I have a problem, where did you check the soldered points whit the multimeter?

@jrok96 9 ай бұрын

he would be using diode mode to ground (no battery connected!) your meter may differ a bit . like he tends to get .619 my meter will read .819 .

@Consti8705 9 ай бұрын

@@jrok96 OK but I'm still a beginner and don't know where ground is on the Switch Life

@tyronejennings599 8 ай бұрын

How much do you charge for doing your installation?

@judimit01 9 ай бұрын

Can you do a tutorial for picofly v1 patched

@user-gx6vv7it3e 8 ай бұрын

Hi, That copper wire you're using is in some way? Which does not short circuit?

@douglascalixto9086 8 ай бұрын

That is enammeled cooper wire. It´s don´t cause short on circuit.

@masterroshi5720 3 ай бұрын

@@douglascalixto9086what thickness (milimeters)is best for this mod?

@douglascalixto9086 3 ай бұрын

@@masterroshi5720 I use awg 32 ptfe or enammeled wire 0.10 in any cases.

@helloimuzumakikira1 9 ай бұрын

What is the wire that you use to directly solder?

@douglascalixto9086 9 ай бұрын

Probably enammeled wire 0.1.

@HeiLangXiaoDuo 4 ай бұрын

Hi! Could you please tell me which temperature do you use to solder these tiny spots?

@tvpartsworld806 4 ай бұрын

300C is enough.

@HeiLangXiaoDuo 4 ай бұрын

I always use 368C, but sometimes soldering becomes like jam lol I face this differently in different boards. I used 395C to solder the APU flex cable since they barely melted at 370-385C, maybe my tips are bad. I have installed the modchip on switch lite with 0.1 jumper wires without using the upgraded flex cable. However now the home button doesn't work for some reason, not sure what I did wrong, I have checked the button, broken traces around the APU, pressure on it because of the chip, everything, it was keep being pressed at times, led was blinking like from time to time too until it almost dead now. (No standby/ sleep mode too) I believe the button press is still being registered somehow. Modifying it was all possible thanks to wonderful people like you. I'm happy with the clean outcome again, not ugly except the bit ugly looking solder joints on the APU. Clean work so far but not the best :) Keep posting awesome videos like this! Stay safe and have fun! Have a wonderful day! Thanks again for the guidance!

@jimmypangestu7083 5 ай бұрын

between picofly and hwfly, are there any difference with injected payload?

@erickantoniomorales4553 5 ай бұрын

La misma duda tengo

@RonenLin 7 ай бұрын

Where can someone buy this mod from?

@ibrahime316 9 ай бұрын

Do more Old pls

@JackJersonShow 9 ай бұрын

Can make video Instinct v6 on lite please🙏

@jrok96 9 ай бұрын

why? just run each wire to the corresponding pad. flash the chip first

@bosspapob 9 ай бұрын

Where did you get the chip from?

@context4719 9 ай бұрын

AliExpress clone probably

@jrok96 9 ай бұрын

@@context4719 clone of what? the whole use of the "open source" rp2040 pico came long after team xecuter got shut down. It is its own thing. hwfly was a clone of team xecuters work for 10 times the price.

@bosspapob 8 ай бұрын

@@context4719 I am asking for the store

@gabrielpollock1303 9 ай бұрын

Do you have a link to the picofly lite? Or both in that case?

@Durantulaa_PHX 8 ай бұрын

Can i pay someone professional to mod my switch lite for me?? Please someone help

@tvpartsworld806 8 ай бұрын

please message me on Whatsapp +447451466640

@OwiPascual 5 күн бұрын

is it okay if i didnt put uv mask

@OwiPascual 5 күн бұрын

and what solder tip should i use

@thedropman 8 ай бұрын

In 2023 most he could get was 8gb

@seanshay6573 9 ай бұрын

i dont see why anybody with an iq above that of a ping pong ball would ever choose picofly over hwfly both cables for hwfly work great i have never had a problem using both cables the solder job is easy period

@jrok96 9 ай бұрын

the chips are cheaper and do the same thing. the picofly based chips come with the same exact cables. Hwfly doesn't use some superior manufacturing or QC. people would say the same thing about coolrunners for rgh back in the day. ! in the end the cheaper clones and acev3 chips that came out actually performed better for one tenth the cost.