When I saw them in the store I just had to test them.

Glad I could help

Shout out to Hyper Tough and the girls that at work for Colbalts rakes and know little about ace hardware too but also them to🤨

I love this thing, still use it just about every day.

I saw there were a couple more tools like the ratchets and a rotary tool. Wondered how good they would be. Thanks for the comment.

Same here. Managed to get it with $15 off via a PayPal deal with Walmart. I grabbed this brushless impact so now I have both tools with 2 batteries for around $110. Going to wait and see if I can grab the 2.0A battery and the fast charger if they ever go on sale. Don’t need them right now anyway

Blu Air - I agree with you totally

@@billymorrish4466 Maybe mommy and daddy could chip in for a teenager just getting into the trade, but if you come from a poor background and you are looking to get an impact to get you started until you make enough money to start upgrading to better tools, it will do the job for 5/16 and 1/4 inch panel screws when starting out with maintenance work as a new hire with little to no experience. Not everyone can afford Milwaukie and the name brands when you are getting started in the trade.

@@myHVAClife I see your point, and your right.

yesss ryobi tools stay at home 😭

As an hvac tech i just bought this last week i love it fits in tool bag lightweight its perfect

I hope so as well.

I think they have a 5ah skill battery for like 40 bucks... The skill 12 volt line looks interesting

@@WHATDATTOOLDO They go up to 4amp on 12v comes with the circsaw, i mean on the hyper tough line lol. like i said though with the sales on the skil stuff can't beat it.

@@codustv1465 Ahh I new I saw a bigger battery just wasn't paying a lot of attention

It has done well so far.

@@zacksintheshop Glad to hear. I’m really thinking about picking this up to use around the house.

I got it on Rollback for $49.88!

Thanks for the info man, appreciated

Given that Hart (Walmart's other 'house' brand, which seems to be positioned as a bit more premium and gets a whole bunch more advertising) is made by TTI (makers of Milwaukee/Ryobi/etc), having Hypertough made by Chervon would be an interesting choice of OEMing by Walmart. Walmart is certainly big enough to get away with it, but I'd imagine that the more they buy from one vendor, the better the terms they get are.

@@davidedwards9157 Yes that is true, and it actually is pretty odd Home Depot's product line is dominated by TTI and doesn't even have a single offering from Chervon, and Lowe's has none from TTI, not even Milwaukee which TTI keeps free to be sold anywhere. Does kind of seem like home Depot must have struck some kind of deal to keep Milwaukee out of Lowe's that otherwise has a more diverse brand selection than Home Depot including Chervon's three biggest brands Kobalt, Skill and Flex. So it does kind of make sense of Walmart might look for some offerings from both companies, and if this 12-volt stuff from a hyper tough isn't Chervon it sure extremely similar to their Craftsman NexTec line. Unfortunately though I think hyper tough is being made by several different companies, I don't think the 20 volt line is made by the same company. I have used this ratchet quite a bit since I last commented I am more and more impressed with it everyday. I actually have yet to see it struggle with anything, including running nylon locknuts as we seen tested in TTCs videos.

@@Troyvidihoo I suspect the TTI/HD relationship (and the Chervon/Lowes relationship, for that matter) is more tied to the 'makes the high-volume house brand and gets sweetheart pricing due to volume' thing... I don't think HD is opposed to selling (say...) Skil (which probably would sell better than Ridgid at this point), but they have finite shelf space, they have contracts with StanleyB&D/Metabo/Makita/Bosch (and customers who buy them), and TTI gives them better pricing on Ridgid than Chervon will give them on Skil (and Lowes probably wouldn't do enough volume on Milwaukee to get the leverage to do the loss-leader sales that HD does every couple months). As a side note... I'm really impressed by how good the low-end brands are getting. When I started (early 90s), Ryobi was kind of a joke (at least the battery powered stuff), Kobalt wasn't even in battery power tools yet, Walmart had a rotating selection of tools from brands you never heard of before (and never would hear of again), Sears didn't want to make battery-powered tools over concerns about tainting the Craftsman brand (which was actually respected at that point), and Warrior/Chicago Electric were the best Harbor Freight had (and that was in the 'QA is performed by the customer' days). At this point, that HyperTough impact driver looks vastly better than anything I had available at the time, and if you factor in inflation, the 9.6V Makita I was using was probably 20x-30x more expensive. I like to think my current M12 Fuel is a better tool than the HyperTough, but they're a whole bunch closer to each other than either is to the old stuff, at least in performance (longevity is a different question), and the same goes for Ryobi/Kobalt/Bauer/Hart/(new)Craftsman.

@@Troyvidihoothe reason Milwaukee is not in Lowe’s stems from a long time back (2008 to be specific) when Lowe’s and Milwaukee’s agreement expired, it was not renewed because Lowe’s did not pay the bill on a 1.2 million dollar shipment of tools. I believe there was a lawsuit and everything. The agreement was never renewed again.

I don’t know if they will do a press tool.

They are reduced here as well, nice deals

The 12 volt Skil is in this video, is that the one your talking about?

@@zacksintheshop no there is a new version gen 2 and it's much better that the first

Wow. Didn’t know that

12V New model Item #5041709 Model #ID6744A-10 $65.98 at Lowes.

@@zacksintheshop I just saw Lowe's put at $129, 5 tools combo with 2 batteries, the New skill 12v 2nd gen. Item#2758780. Just the 2nd gen drill and impact 12v at $99 Item#5041704 until December 24 last day.

Working on that now

Exactly. I had a tree fall down in my yard and needed to remove it. I didn't want to pay hundreds to have it done, so I went to wally-world and bought a hypertough 14 inch electric chainsaw for like $60. That thing tore through the tree no problem. I cut it into pieces, put it on my truck and I was done. Have used it several times since for cutting other stuff and it's going strong. People like me are who Hypertough markets to - people who need a tool in a pinch. They are not marketed to pros who use tools all day every day. I think Hypertough would even admit that.

Let me know when you do

@@Lyle-1999 hey i managed to make one for it!

@Marc Antonio Perez Do a short video about it. I'm pretty interested in bit holders for power drivers myself.

@@MightyMiniWorkshop how do I buy one?

@@Lyle-1999 check out the description in my account

It is good so far. If anything comes up I will let you all know. I did quite a special on the m12 so most of the time you will pay more.

The thing with Milwaukee, you don't just randomly buy batteries (or tools, honestly), you wait for sales and bundles ("buy the 2-battery starter kit, get a free tool") and all the rest of the silliness that is part and parcel of their deal with HD. But yeah, buying them at 'list' price is painful (and that's even when I had to do so for work on the corporate card).

I did and retested the tools. It’s on my new channel- kzfaq.info/get/bejne/eb-VY6SQyMCyYWg.htmlsi=xQWPUWutCnaB1mKq

There is a $99 deal going right now - Your friend has shared a link to a Home Depot product they think you would be interested in seeing. www.homedepot.com/p/Milwaukee-M12-FUEL-12-Volt-Lithium-Ion-Brushless-Cordless-1-4-in-Hex-Impact-Driver-Compact-Kit-W-2-0Ah-Battery-and-Bag-3453-21/320559163

Got to love those Black Friday Christmas deals!

Now put it on the side of the 99.00 m12 kit for a few extra dollars Milwaukee fuel all day

I think that designation would suit the brushed version of these

This comment was helpful for me. I'm a diesel tech apprentice looking for 12v tools to compliment my 20v collection. Thanks for sharing!

And that one looks like a beast

I get that a lot