You did great for riding after just 30 minutes.I started off with a Sherman max & it took me a few 30min sessions by the third day I was questioning my financial decision. But I continued & finally it just clicked. Now I’m up to my 3rd wheel my most current & fastest one is the Begode EX30 🤙

You did great, much better then i did. I started on the Nikola and have just upgraded to an EXN MSS. Im still learning myself but nothing feels better than gliding along at 20/25 mph, its almost like flying. I love it!!! Keep wheeling 👍

Congrats man. Very fun hobby. I cannot stand people that tell others what they should and shouldn't do. I'm glad you went straight into something you feel you won't outgrow soon. I started with a Nikola+ and ended up with a Inmotion V13 and these larger wheels are something else but nothing that time wont get over.

I made the mistake of getting a small wheel to start a long ass time ago and now im on wheel 6. You made the right choice. good shit

Great choice! I’ve got the same. However I think currently the EX30 has that title of the fastest EUC on the market.

I started with a V5f.Took me about 30 min to get the hang of ridding it.....2 weeks later I started looking for bigger/faster wheel. I myself got the master and at the time was the fastest EUC on the market. I have had it almost a year now and it is an amazing machine. Congratz on the new wheel and great job picking it up.

Congrats man! Ride safe.

Awesome man!!! Respect the wheel, and have fun mastering it!! 😎

Great honest review very refreshing to have this prospective.

I got a Begode master as my first wheel, too. I started riding October 2022. Best decision ever. People said I would give up before I actually learned to ride, because it'd be too difficult...no. I have already caught air, and hit 4-stairs....rolled down, and gapped the stairs, and dropped-down. You picked it up quicker than I did--but you have unicycle experience... I just had 20+ yrs of skateboarding. lol Keep up the great work, man. It's a lot of fun in Austin, Tx, but I could only image Florida would be a blast. I plan on going to South Florida with it, eventually, so I can ride around areas like Boyton Beach & Del Ray...I bet it'd be a blast.

Great job man! 👍😎

I'm very impressed... is this really your first EUC experience? you got it in minutes... Congrats for the purchase, have fun!

Your previous exp with unicycle definitely helped. Took me 4 days before I had enough control to ride on trails around other people.

Excellent review. Your training lets me know I can do it too. Thanks

Good stuff, as well as timing. I just picked up a OneWheel. Super fun cruising around so quickly and easily and it being so quiet and effortless.

Welcome to the EUC hobby! I remember some of your drone videos . Be safe !

You learned way faster than me. Took me weeks! EUC journey is fantastic though. Hope you make more EUC videos when weather improves or sooner.

I got an RS19 the day you uploaded this video, it was an instant love, I've done close to 40 miles in the first week.

I love/admire your attitude. :) I started with a small/medium sized wheel (18XL) and bruised myself repeatedly over 3 months before I finally got it. Lol.

You picked it up super quick! It took me several 30 minute sessions over about a week before it finally clicked and I could ride for more than a dozen yards at a time. Once it clicks though it’s a magical feeling.

Quick learner, good for you

Figure out your favorite foot stance, stay away from curbs that are parallel to you and don’t try to go up a curb by turning at the curb hit it straight on point is watch your peddle clearance (ok?). Work on your worst side where you have least comfort turning in that direction. Do figure eights. Stay away from pedestrians for 300 miles. Do a speed run and leave room for a hard stop and plan on wobbles turn a bit while you stop if it makes the wobble go away. Just plan on turning most of the time to avoid bad situations not stopping because well no brakes.

It took me 3 to 4 days to be confident enough to use my euc for commute and 2 months to feel good enough when doing a one leg start and stop. Your 30min progression is nowhere close to what I had to go through, it took me multiple hours to get to your 30minutes result, I guess that having unicycle experience really helps a lot. Like you my first euc was the most powerful one at the time and I regret nothing, I wish I could feel again the thrill you are feeling right now :) Have fun and stay safe!

You learned fast! I hope to see more EUC content, this was great

You did really good and gongrats 🎉

Good job for a first ride. Practice left and right turns, getting sharper turns with practice. To free mount the wheel, get it directly under your junk before stepping on to it. Post more vids. 👍

Super cool. Can’t imagine going 50mph on that. Stay safe

you are a natural.

Good job with video

I remember my first time too bought me a v11 brand new wen it first drop and took me around 5-6 hrs to teach my self. But I got frustrated in the last hr and jus went on the road n was jus riding. Next day wen I was not good jus rode to work wit traffic. I was a fast learner tho

dangerous way to start, also super overkill lol

My 1st euc was the master too. What parts did you 3D print for it? And do you have any files you can drop? Looking to and some stuff to my master as well without breaking the bank too much

Nice man you picked it up fast. Be careful.

Ey yo bruh good job over there u did great hope you learn and get used to it more and more...one question please cand u give mee the name of the wheel ?

"I'm not going to go over 20 mph" -M.D. 2023

did your wheel wobble and did you experience turning to be difficult? just got the S22 Pro & I'm experiencing these things

I have the same one with 40t cells. 👍 I see you're using your left leg as your starting leg. You can lean the master on your left leg while standing on it to start. I use my right leg in the same way.

Hey bro, no clue if you gonna see this, but as an avid rider, try to learn without those side pads. It’ll make your control on your wheel so much more safe and better which is crucial for times of emergency like sudden wobbling while braking.

Always keep bent knees, you hit a bump with straight leg, you go down instantly...starting and stopping is the most important thing to learn, especially stopping really quick under sudden circumstances... PS if riding next to a body of water like you did, should use a tether/lanyard...

I have this same model. Just received new Sherman S and I still think the Master is not bad wheel

there’s nothing wrong with learning on a master. It is not on my bucket list, but it is a pretty good wheel.

Unicycle experience no doubt helped a lot. I was (still am) just an office rat with no experience in sports and it took 4-5 hours to get riding.

👏🏻👏🏻👏🏻💯💯

Nice. Welcome to EUC World bro😊

That’s pretty cool. I don’t think I’ve seen one, just bikes. Good to see you adjust to it after approximately 45 minutes. The start and full stop would get the best of me and probably would break some. Hearing the fresh tire on the pavement is always music to my ears. Cool that you printed fairings and fender for it; also, can the lights be adjusted like a vehicle? I noticed when you are coming up on a curve, that the lights have a narrow beam. Just curious if the beam can be widened? Either that or have a headlamp that can provide more light. Seeing it from the video, I couldn’t tell if you have adequate light to right in dark areas.

The only issue with the Master 40t is the poor range, I regret purchasing and should have bought the molicel version.. with five bogode wheels, the latest one being the ex30 I have plenty to keep me occupied.

Nice ! After watching few videos I’ve decided to go for S22 Pro

Ski/hiking poles work good when learning.

You need to reprint all those pieces in tpu. No euc protection of pads should be in pla

Master its prudent to get Sheridan Miller new linkage and shave tires to round profile to ride. stock linkage bottoms out too easily so must get linkage, depends on your weight if you r over 200 pounds put it in hard set. if lighter put at soft set.

Looks mighty. Would you recommend it to other first timers?

hey if you ride in the city most of the time, Highly recommend the Michelin City Grip Tire, it is so much better than the original tire that came with the Master.

How did you break the twilight so fast ?

Just get used to handling the weight with one leg and start from there. Helps if you find a leg your comfortable with stabilizing it and use a wall step on and off as a exercise.

Not the most powerful (EX30 holds that title), but still: bravo!

It's PLA HT right!? Cause normal one can melt under sun, great idea to protect it though

Hi, could you please send links for those 3d parts?

Ex30 is the most powerful wheel now but the master is no joke

One thing u mess up on wen mounting is don’t hole the wheel wit ur hand hold it up wit ur foot then hop on the way was doing it is weird 😂. But great job n vid. U shud train ur leg muscle to hold up the wheel would make mounting much easier

👍fast learner, enjoy be safe riding, youll notice you will start making up excuses to do give have a reason to just ride. Again well done.

You’re gonna want to get those pads printed in TPU. Hard plastic pads = no good.

That girl is so uninterested in whats going on here. Lmfao

These things are very, very cool and I'm amazed how fast they can actually go. I've seen a few here in the U.K. and they fly! I'm just wondering if these will be included in the governments plans to ban electric scooters, which considering they want people to cut down on using cars, seems a little unfair. I'm not entirely sure just how well I'd get on with ones of these, but it would definitely be fun trying. Btw, great to see another video from you Miles, it's been a while.

Welcome to the EUC world. Your addiction has just begun.

lifting your foot on from the side when getting on is much easier than from the back

try getting on and off without holding it as this is the worst way to get on and off as its harder to balance but good start you got the jisp of it

If it wasn't for the fire risk I'd get a gotway begode

you def need more air in your tire.....also ... bicyceles dont cut out .... begodes definitely do .... wear a full helmet!

Where in Florida? I'm in Orlando.

U will ride the euc and u will be happy , klaus schwab

v13 is the most powerful but begode is close second, your girl seems as amused by it as mine is lmao

I was super confused as to how you could just ride the thing in 30 minutes until you said you could ride an actual unicycle.

PLA go boom yet?

Hi friend , see you have printed my side pads on Thingiverse. Have you good experience with ? 😊

put more air in the tire and it will be easier to turn.

30min! It took me 30 hours to learn how to ride

If you want to 3d print tpu rubber i'd suggest to go for 1mm extruder tip and settings are. kzfaq.info/get/bejne/e5Z9hpdzydPLenk.html

Not gonna go faster than on a bicycle yea RIGHT

That wheel looked flat

Where's the like to the bike

Wear fullface helmet & have fun :)

Master ain't "most powerful", although pretty solid (after being tinkered with by EUC specialists)

Hi

Wall or fence is okay for learning but much better to hold onto someone's shoulder walking next to you.. inertia is your friend, too slow and you will fall over same as riding a bike

Beware of wobbles going downhills its a rookie thing, it takes a bit to get good would say once you hit around 500-1000 miles your gonna own it 💪🦵🦵