I built a LEGO Technic RC powerboat

Рет қаралды 23,033

Жыл бұрын

My following projects will be water-based, so I built an experimental powerboat to test various gear ratios with LEGO RC motors. The final result, which can be seen in this video, uses the inner output of each RC motor to drive two propellers via two 90-degree gearboxes that use a 20-tooth bevel as a driver gear (input), and a 12-tooth bevel as a follower gear (output). The gearboxes are on the same level as the propellers, in order for them to be submerged and use the water to keep them cool and lubricated (gear damage prevention).
If you enjoy this video, give it a thumbs up, and check out my other projects as well!
LEGO PowerBoat V1.0 :
Power : 2x LEGO RC motors
Control : 1x SBrick - 3-Cell LiPo battery
Remote controller : Xiaomi Redmi 9AT
Footage was shot on Apeman A77 (on-board), Google Pixel 6a smartphone stabilized on Zhiyun Smooth Q3 gimbal, and DJI Mavic Mini drone (aerial).
Follow me on Twitter, Instagram or Facebook for sneak peeks on upcoming projects at Brick & Gear.
End music by LiQWYD
/ liqwyd
Free download : bit.ly/another-time-free-download
#lego #powerboat #legotechnic #powerfunctions #afol #adultfanoflego #technic #legolife #legomania #rcboat #legorc #rc #asmr #engineering #boat #legoboat #legopowerboat #speed #highspeed #concept #speedconcept #testing #experiment

Пікірлер: 30

@Razzle5248 Жыл бұрын

that's really cool!

@brickandgear Жыл бұрын

Thanks! 🙏

@romarioxxx8099 11 ай бұрын

i love the build

@brickandgear 11 ай бұрын

Thank you! 🙏

@QurcusDark Жыл бұрын

Great build 😀

@brickandgear Жыл бұрын

Thanks! 🙏 I hope you enjoy my next builds as well!

@QurcusDark Жыл бұрын

@@brickandgear oh, i think so.

@mrtechlogiantgaming 4 ай бұрын

And also, how in earth does those propellers even exist. Are they Lego 3d printed ones?

@brickandgear 4 ай бұрын

They are RC propellers fitted with Technic axles. You can check out how I fit them here : kzfaq.info/get/bejne/gL6qm5Nn1K2ZZ6s.htmlsi=ETVOXpQJtQpKCcLC

@laceymoore8022 Жыл бұрын

What type of propeller situation did you have love it?

@brickandgear Жыл бұрын

I use RC propellers with a 3-stud Technic axle permanently fixed in them. You can check out my tutorials to see how I screw the axle on them.

@alycecisine4711 7 ай бұрын

In the frame 11”02 is that a bout that he sunk earlier look in the crner overall, I like the videos😊😂♥️🚢

@brickandgear 7 ай бұрын

This is actually the place where I sank my merchant ship a few years ago! I recovered the ship though... 😊

@NIGHTvdj Жыл бұрын

συγχαρητηρια! να ρωτησω, ο σχεδιασμος μονο περιπου ποσο χρονο παιρνει; δηλαδη να ξερεις ποσα εξαρτηματα χρειαζεσαι συνολικα (γιατι στο βιντεο ηταν ετοιμες οι πιο δυσκολες κατασκευες πχ οι προπελες) επισης η παραλια που ειναι? ησυχη φαινεται αν και υποθετω το Μαιο δεν εχει κοσμο ακομα!

@brickandgear Жыл бұрын

Ευχαριστώ πολύ! Ο σχεδιασμός και η κατασκευή του συγκεκριμένου μου πήρε κοντά στη μία ώρα (ήταν μία έμπνευση της στιγμής). Χρησιμοποίησα την ίδια κατασκευή για τις προπέλες από παλαιότερο σκάφος (με μία αλλαγή για να φιλοξενηθούν τα μεγαλύτερα μοτέρ), όπως επίσης και τα ίδια καθίσματα. Γενικά, δεν αφιέρωσα πολύ χρόνο γιατί ήθελα απλά να δοκιμάσω την συμπεριφορά των μοτέρ με συνδυασμό γραναζιών για αύξηση στροφών. Τα μεγαλύτερα σκάφη σίγουρα μου παίρνουν περισσότερο χρόνο, γι'αυτό τα σχεδιάζω πρώτα στον υπολογιστή. Η παραλία είναι ο Άγιος Νικόλαος στην Παλαιά Φώκαια.

@NIGHTvdj Жыл бұрын

ευχαριστω πολυ!

@romarioxxx8099 11 ай бұрын

where can i get minifigures like those??

@brickandgear 11 ай бұрын

They are old Technic minifigures. You could probably get them from BrickLink.

@mrtechlogiantgaming 4 ай бұрын

How in the word do you attach that transmitter to the Lego components

@brickandgear 4 ай бұрын

That powerboat used an SBrick controller. Very easy to mount.